Smart Access Gateway:Configure SAG-100WM in the web console

Step 1: Configure the on-premises client

Before you configure an SAG-100WM device in the on-premises web console, you must enable Dynamic Host Configuration Protocol (DHCP) for the on-premises client to access the web console.

• Windows: Configure a dynamic IP address for the Windows client. Windows 10 is used in the following example.

  1. In the lower-right corner, right-click the network connection icon, and then click Network and Internet.

  2. In the right-side panel, click Change adapter settings.

  3. Right-click the connected network, and then click Properties.

  4. Double-click Internet Protocol Version 4 (TCP/IPv4).

  5. Select Obtain an IP address automatically and Obtain DNS server address automatically.

  6. Click OK.

• Mac: Configure a dynamic IP address for the Mac client.

  1. On the desktop, click System Preferences, and then click Network in the Internet & Network section.

  2. Click the connected network, and then click Advanced.

  3. On the Ethernet page, click the TCP/IP tab.

  4. From the Configure IPv4 drop-down list, select Using DHCP.

     

Step 2: Set the password

1. A LAN port of the SAG device is connected to the on-premises computer.

2. Open the browser on the connected on-premises computer and enter 192.168.88.1 in the address bar.

   Note

   • If the LAN port uses a static IP address, enter the static IP address in the address bar.

   • If the LAN port uses a dynamic IP address, you have configured CIDR blocks in the SAG console, the WAN port has enabled DHCP, and the CLOUD indicator is on when the network cable is connected, enter the first IP address of the first CIDR block configured in the SAG console.

     For example, if the first CIDR block you specified is 172.16.0.0/16, enter 172.16.0.1 in the address bar.

   • If neither the LAN port nor the console is configured, you can enter the default address to log on to the web console.

     • If you are using version 1.0.x, enter 192.168.0.1.

     • If you are using version 2.0.x, enter 192.168.88.1.

3. If this is your first time logging on to the web console, you must set the logon password.

   Keep your password confidential. If you forget your password, press the reset button on your device to clear the password.

4. Log on to the web console.

Step 3: Configure the SAG-100WM device

After you log on to the web console of the SAG-100WM device, you can configure the device. SAG-100WM devices provide multiple features to meet your requirements in different deployment scenarios. For more information about how to connect private networks to Alibaba Cloud through SAG-100WM devices, see Deploy an SAG-100WM device.

1. Configure a WAN port.

   1. In the top navigation bar of the web console, click Setting.

   2. Click WAN to configure a WAN port.

      By default, the connection type of the WAN port on an SAG-100WM device is Dynamic IP. The IP address of a WAN port is automatically obtained by the device that is connected to the WAN port.

      Note

      You can configure a WAN port as needed. For more information about the parameters of the WAN port, see Configure a WAN port.

2. Configure a LAN port.

   1. In the top navigation bar of the web console, click Setting.

   2. Click LAN to configure a LAN port.

      • Wired network configurations.

        By default, the connection type of the LAN port on an SAG-100WM device is Dynamic IP. The IP address of a device connected to the LAN port is automatically obtained by DHCP. You can configure a LAN port as needed. For more information about the parameters of the LAN port, see Configure a LAN port.

        When you configure the LAN ports in the web console, if the connection type of the LAN port is Dynamic IP, the SAG device allows you to enter custom private CIDR blocks.

        • Unselected: allows you to enter a custom IP address for the port and set a custom Dynamic Host Configuration Protocol (DHCP) address pool.

        • Custom Segment: allows you to enter custom CIDR blocks. The system automatically allocates an IP address and DHCP address pool for the LAN port. You can manually modify the allocated IP address.

        • If you have configured on-premises routes in the SAG console, the CIDR blocks are automatically displayed. You can allocate IP addresses as needed.

      • Wireless LAN configurations.

        By default, the wireless LAN feature is disabled. For more information about how to enable the wireless LAN feature, see Enable wireless connections.

3. Configure the routes.

   1. In the top navigation bar of the web console, click Setting.

   2. Click Route to configure the static routes.

      For more information about how to configure routes, see Add a static route, Configure OSPF routing, and Configure BGP routing.

      Note

      SAG-100WM devices of version 2.0.x allow you to configure OSPF and BGP dynamic routing only in the web console instead of the Alibaba Cloud Management console.

Optional. Step 4: High availability (HA) configurations

SAG-100WM devices support HA.

1. In the top navigation bar of the web console, click Setting.

2. Click HA to configure HA.

   SAG-100WM devices support high availability to continue to provide services when the active SAG device fails to work. For more information about the parameters, see Configure HA for SAG devices.