ApsaraDB RDS:Migrate data from a TencentDB for MySQL instance to an ApsaraDB RDS for MySQL instance

Prerequisites

Limits

• The schema migration method does not support events.

• Data Transmission Service (DTS) reads floating-point values of the FLOAT and DOUBLE data types in MySQL by calling the round(column,precision) function. If the value precision is not specified by the data type of a column, the precision is 38 bits for FLOAT-type values and 308 bits for DOUBLE-type values. You must check whether the precision of FLOAT-type and DOUBLE-type values that need to be migrated by DTS meets your business requirements.

• If you use the object name mapping feature on an object, other objects that are dependent on the object may fail to be migrated.

• If incremental data migration is used, binary logging must be enabled for the TencentDB for MySQL instance.

• If incremental data migration is used, the binlog_format parameter of the source database must be set to row.

• If incremental data migration is used and the TencentDB for MySQL instance runs MySQL 5.6 or later, the binlog_row_image parameter of the instance must be set to full.

• If incremental data migration is used and cross-host migration or reconstruction is performed on the TencentDB for MySQL instance during incremental data migration, the IDs of binary log files may be disordered, and the incremental data that is migrated may be lost.

Usage notes

DTS attempts to automatically resume abnormal migration tasks that are run within seven days. In this case, data on the TencentDB for MySQL instance may overwrite the service data that is written to the ApsaraDB RDS for MySQL instance. After a migration task is complete, you must execute the REVOKE statement to revoke the write permissions of the DTS account that is used to access the ApsaraDB RDS for MySQL instance.

Procedure

1. Use one of the following methods to go to the Data Migration page and select the region in which the data migration instance resides.

   DTS console

   1. Log on to the DTS console.

   2. In the left-side navigation pane, click Data Migration.

   3. In the upper-left corner of the page, select the region in which the data migration instance resides.

   DMS console

   Note

   The actual operation may vary based on the mode and layout of the DMS console. For more information, see Simple mode and Customize the layout and style of the DMS console.

   1. Log on to the DMS console.

   2. In the top navigation bar, move the pointer over Data + AI > DTS (DTS) > Data Migration .

   3. From the drop-down list to the right of Data Migration Tasks, select the region in which the data synchronization instance resides.

2. Click Create Task to go to the task configuration page.

3. Optional. Click New Configuration Page in the upper-right corner of the page.

   Note

   • Skip this step if the Back to Previous Version button is displayed in the upper-right corner of the page.

   • Specific parameters in the new and previous versions of the configuration page may be different. We recommend that you use the new version of the configuration page.

4. Configure the source and destination databases. The following table describes the parameters.

   Warning

   After you configure the source and destination databases, we recommend that you read the Limits that are displayed in the upper part of the page. Otherwise, the task may fail or data inconsistency may occur.

   Section	Parameter	Description
   N/A	Task Name	The name of the DTS task. DTS automatically generates a task name. We recommend that you specify an informative name that makes it easy to identify the task. You do not need to specify a unique task name.
   Source Database	Select a DMS database instance.	The instance that you want to use. You can choose whether to use an existing instance based on your business requirements. If you select an existing instance, DTS automatically populates the parameters for the database. If you do not use an existing instance, you must configure the database information below. Note In the DMS console, you can click Add DMS Database Instance to register a database with DMS. For more information, see Register an Alibaba Cloud database instance and Register a database hosted on a third-party cloud service or a self-managed database. In the DTS console, you can register a database with DTS on the Database Connections page or the new configuration page. For more information, see Manage database connections.
   	Database Type	Select MySQL.
   	Access Method	Select Public IP Address. Note You must allow access to the source instance from the public network before you configure the data migration task.
   	Instance Region	Select the region in which the TencentDB for MySQL instance resides. Note If the region in which the TencentDB for MySQL instance resides is not displayed in the drop-down list, select a region that is geographically closest to the instance deployment location.
   	Domain Name or IP	Enter the domain of the TencentDB for MySQL instance, which is included in the public address of the instance.
   	Port	Enter the port of the TencentDB for MySQL instance, which is included in the public address of the instance.
   	Database Account	Enter the default priviledged account (root) of the TencentDB for MySQL instance.
   	Database Password	The password that is used to access the database instance.
   	Encryption	Select Non-encrypted or SSL-encrypted. If SSL encryption is not enabled for the TencentDB for MySQL instance, select Non-encrypted. If SSL encryption is enabled for the TencentDB for MySQL instance, select SSL-encrypted. In this case, you must also upload a CA Certificate and specify the CA Key.
   Destination Database	Select a DMS database instance	The instance that you want to use. You can choose whether to use an existing instance based on your business requirements. If you select an existing instance, DTS automatically populates the parameters for the database. If you do not use an existing instance, you must configure the database information below. Note In the DMS console, you can click Add DMS Database Instance to register a database with DMS. For more information, see Register an Alibaba Cloud database instance and Register a database hosted on a third-party cloud service or a self-managed database. In the DTS console, you can register a database with DTS on the Database Connections page or the new configuration page. For more information, see Manage database connections.
   	Database Type	Select MySQL.
   	Access Method	Select Alibaba Cloud Instance.
   	Instance Region	Select the region in which the destination RDS for MySQL instance resides.
   	RDS Instance ID	Select the ID of the destination RDS for MySQL instance.
   	Database Account	Specify the database account of the destination RDS for MySQL instance. The account must be granted read and write permissions on the instance.
   	Database Password	The password that is used to access the database instance.
   	Encryption	Specifies whether to encrypt the connection to the source database instance. Select Non-encrypted or SSL-encrypted based on your business requirements. If you want to set this parameter to SSL-encrypted, you must enable SSL encryption for the ApsaraDB RDS for MySQL instance before you configure the DTS task. For more information, see Use a cloud certificate to enable SSL encryption.

5. After the configuration of source and destination databases, click Test Connectivity and Proceed at the bottom of the page.

6. If an IP address whitelist is configured for your self-managed database, add the CIDR blocks of DTS servers to the IP address whitelist. Then, click Test Connectivity.

   Warning

   If the public CIDR blocks of DTS servers are automatically or manually added to the whitelist of a database instance or to the security group rules of an ECS instance, security risks may arise. Therefore, before you use DTS to migrate data, you must understand and acknowledge the potential risks and take preventive measures, including but not limited to the following measures: enhancing the security of your username and password, limiting the ports that are exposed, authenticating API calls, regularly checking the whitelist or security group rules and forbidding unauthorized CIDR blocks, or connecting the database instance to DTS by using Express Connect, VPN Gateway, or Smart Access Gateway.

7. Configure the objects to be migrated.

   1. On the Configure Objects page, configure the objects that you want to migrate.

      Parameter	Description
      Migration Types	To perform only full data migration, select Schema Migration and Full Data Migration. To ensure service continuity during data migration, select Schema Migration, Full Data Migration, and Incremental Data Migration. Note If you do not select Schema Migration, make sure a database and a table are created in the destination database to receive data and the object name mapping feature is enabled in Selected Objects. If you do not select Incremental Data Migration, we recommend that you do not write data to the source database during data migration. This ensures data consistency between the source and destination databases.
      Method to Migrate Triggers in Source Database	Select a migration method for the triggers based on your requirements. If you do not need to migrate triggers, leave this parameter unspecified. For more information, see Synchronize or migrate triggers from the source database. Note This parameter is available only when the Migration Types is set to Schema Migration.
      Enable Migration Assessment	Select whether to perform an assessment before migration. During the assessment, the system checks whether the schemas of the source and destination databases, including the index size, stored procedures, and depended tables, meet the requirements for the migration. Note This parameter is available only when the Migration Types parameter is set to Schema Migration. If you select Yes, additional time is required to complete the precheck. You can view the assessment result during the precheck. The assessment result does not affect the precheck results.
      Processing Mode of Conflicting Tables	Precheck and Report Errors: checks whether the destination database contains tables that use the same names as tables in the source database. If the source and destination databases do not contain tables that have identical table names, the precheck is passed. Otherwise, an error is returned during the precheck and the data migration task cannot be started. Note If the source and destination databases contain tables with identical names and the tables in the destination database cannot be deleted or renamed, you can use the object name mapping feature to rename the tables that are migrated to the destination database. For more information, see Map object names. Ignore Errors and Proceed: skips the precheck for identical table names in the source and destination databases. Warning If you select Ignore Errors and Proceed, data inconsistency may occur and your business may be exposed to the following potential risks: If the source and destination databases have the same schema, and a data record has the same primary key as an existing data record in the destination database, the following scenarios may occur: During full data migration, DTS does not migrate the data record to the destination database. The existing data record in the destination database is retained. During incremental data migration, DTS migrates the data record to the destination database. The existing data record in the destination database is overwritten. If the source and destination databases have different schemas, only specific columns are migrated or the data migration task fails. Proceed with caution.
      Capitalization of Object Names in Destination Instance	The capitalization of database names, table names, and column names in the destination instance. By default, DTS default policy is selected. You can select other options to make sure that the capitalization of object names is consistent with that of the source or destination database. For more information, see Specify the capitalization of object names in the destination instance.
      Source Objects	Select one or more objects from the Source Objects section. Click the icon and add the objects to the Selected Objects section. Note You can select columns, tables, or databases as the objects to be migrated. If you select tables or columns as the objects to be migrated, DTS does not migrate other objects, such as views, triggers, or stored procedures, to the destination database.
      Selected Objects	To rename an object that you want to migrate to the destination instance, right-click the object in the Selected Objects section. For more information, see Map the name of a single object. To rename multiple objects at a time, click Batch Edit in the upper-right corner of the Selected Objects section. For more information, see Map multiple object names at a time. Note If you use the object name mapping feature to rename an object, changes of other objects that are dependent on the object may fail to be migrated. To specify WHERE conditions to filter data, right-click a table in the Selected Objects section. In the dialog box that appears, specify the conditions. For more information, see Specify filter conditions. To select the SQL operations performed on a specific database or table, right-click an object in the Selected Objects section. In the dialog box that appears, select the SQL operations that you want to migrate.

   2. Click Next: Advanced Settings to configure advanced settings.

      Parameter	Description
      Dedicated Cluster for Task Scheduling	By default, DTS schedules the data migration task to the shared cluster if you do not specify a dedicated cluster. If you want to improve the stability of data migration tasks, purchase a dedicated cluster. For more information, see What is a DTS dedicated cluster.
      Copy the temporary table of the Online DDL tool that is generated in the source table to the destination database.	If you use DMS or the gh-ost tool to perform online DDL operations on the source database, you can specify whether to migrate the data of temporary tables generated by online DDL operations. Valid values: Important You cannot use tools such as pt-online-schema-change to perform online DDL operations on the source database. Otherwise, the DTS task fails. Yes: DTS migrates the data of temporary tables generated by online DDL operations. Note If online DDL operations generate a large amount of data, latency may occur for the data migration task. No, Adapt to DMS Online DDL: DTS does not migrate the data of temporary tables generated by online DDL operations. Only the original DDL operations that are performed by using DMS are migrated. Note If you select this option, the tables in the destination database may be locked. No, Adapt to gh-ost: DTS does not migrate the data of temporary tables generated by online DDL operations. Only the original DDL operations that are performed by using the gh-ost tool are migrated. You can use the default or custom regular expressions to filter out the shadow tables of the gh-ost tool and tables that are not required. Note If you select this option, the tables in the destination database may be locked.
      Whether to Migrate Accounts	Specify whether to migrate the account information of the source database. You can configure this parameter based on your business requirements. If you select Yes, you must select the accounts that you want to migrate and check the permissions of the source and destination database accounts used in the data migration task. For more information, see Migrate database accounts.
      Retry Time for Failed Connections	The retry time range for failed connections. If the source or destination database fails to be connected after the data migration task is started, DTS immediately retries a connection within the retry time range. Valid values: 10 to 1,440. Unit: minutes. Default value: 720. We recommend that you set the parameter to a value greater than 30. If DTS is reconnected to the source and destination databases within the specified retry time range, DTS resumes the data migration task. Otherwise, the data migration task fails. Note If you specify different retry time ranges for multiple data migration tasks that share the same source or destination database, the value that is specified later takes precedence. When DTS retries a connection, you are charged for the DTS instance. We recommend that you specify the retry time range based on your business requirements. You can also release the DTS instance at the earliest opportunity after the source database and destination instance are released.
      Retry Time for Other Issues	The retry time range for other issues. For example, if DDL or DML operations fail to be performed after the data migration task is started, DTS immediately retries the operations within the retry time range. Valid values: 1 to 1440. Unit: minutes. Default value: 10. We recommend that you set the parameter to a value greater than 10. If the failed operations are successfully performed within the specified retry time range, DTS resumes the data migration task. Otherwise, the data migration task fails. Important The value of the Retry Time for Other Issues parameter must be smaller than the value of the Retry Time for Failed Connections parameter.
      Enable Throttling for Full Data Migration	Specifies whether to enable throttling for full data migration. During full data migration, DTS uses the read and write resources of the source and destination databases. This may increase the loads of the database servers. You can enable throttling for full data migration based on your business requirements. To configure throttling, you must configure the Queries per second (QPS) to the source database, RPS of Full Data Migration, and Data migration speed for full migration (MB/s) parameters. This reduces the loads of the destination database server. Note You can configure this parameter only if you select Full Data Migration for the Migration Types parameter.
      Enable Throttling for Incremental Data Migration	Specifies whether to enable throttling for incremental data migration. To configure throttling, you must configure the RPS of Incremental Data Migration and Data migration speed for incremental migration (MB/s) parameters. This reduces the loads of the destination database server. Note You can configure this parameter only if you select Incremental Data Migration for the Migration Types parameter.
      Environment Tag	The environment tag that is used to identify the DTS instance. You can select an environment tag based on your business requirements. In this example, you do not need to select an environment tag.
      Whether to delete SQL operations on heartbeat tables of forward and reverse tasks	Specifies whether to write SQL operations on heartbeat tables to the source database while the DTS instance is running. Valid values: Yes: does not write SQL operations on heartbeat tables. In this case, a latency of the DTS instance may be displayed. No: writes SQL operations on heartbeat tables. In this case, features such as physical backup and cloning of the source database may be affected.
      Configure ETL	Specifies whether to enable the extract, transform, and load (ETL) feature. For more information, see What is ETL? Valid values: Yes: configures the ETL feature. You can enter data processing statements in the code editor. For more information, see Configure ETL in a data migration or data synchronization task. No: does not configure the ETL feature.
      Monitoring and Alerting	Specifies whether to configure alerting for the data migration task. If the task fails or the migration latency exceeds the specified threshold, the alert contacts receive notifications. Valid values: No: does not configure alerting. Yes: configures alerting. In this case, you must also configure the alert threshold and alert notification settings. For more information, see the Configure monitoring and alerting when you create a DTS task section of the Configure monitoring and alerting topic.

   3. Click Next Step: Data Verification to configure the data verification task.

      For more information about how to use the data verification feature, see Configure a data verification task.

8. Save the task settings and run a precheck.

   • To view the parameters to be specified when you call the relevant API operation to configure the DTS task, move the pointer over Next: Save Task Settings and Precheck and click Preview OpenAPI parameters.

   • If you do not need to view or have viewed the parameters, click Next: Save Task Settings and Precheck in the lower part of the page.

   Note

   • Before you can start the data migration task, DTS performs a precheck. You can start the data migration task only after the task passes the precheck.

   • If the task fails to pass the precheck, click View Details next to each failed item. After you analyze the causes based on the check results, troubleshoot the issues. Then, run a precheck again.

   • If an alert is triggered for an item during the precheck:

     • If an alert item cannot be ignored, click View Details next to the failed item and troubleshoot the issues. Then, run a precheck again.

     • If the alert item can be ignored, click Confirm Alert Details. In the View Details dialog box, click Ignore. In the message that appears, click OK. Then, click Precheck Again to run a precheck again. If you ignore the alert item, data inconsistency may occur, and your business may be exposed to potential risks.

9. Wait until Success Rate becomes 100%. Then, click Next: Purchase Instance.

10. Purchasing an Instance.

    1. On the Purchase Instance page, configure the Instance Class parameter for the data migration instance. The following table describes the parameters.

       Section	Parameter	Description
       New Instance Class	Resource Group	The resource group to which the data migration instance belongs. Default value: default resource group. For more information, see What is Resource Management?
       	Instance Class	DTS provides instance classes that vary in the migration speed. You can select an instance class based on your business scenario. For more information, see Instance classes of data migration instances.

    2. Read and agree to Data Transmission Service (Pay-as-you-go) Service Terms by selecting the check box.

    3. Click Buy and Start. In the message that appears, click OK.

       You can view the progress of the task on the Data Migration page.

Reference

Common error codes that may be returned when you configure DTS tasks and solutions