对象存储 OSS：迁移Hive表和分区数据到OSS-HDFS服务

操作步骤

1. 通过SSH方式登录集群，详情请参见登录集群。

2. 执行以下命令，获取帮助信息。

   sudo jindo table -help moveTo

   帮助信息如下所示。

   <dbName.tableName>      The table to move.
   <destination path>      The destination base directory which is always at the
                             same level of a 'table location', where the moved
                             partitions or un-partitioned data would located in.
   <condition>/-fullTable  A filter condition to determine which partitions should
                             be moved, supporting common operators (like '>') and
                             built-in UDFs (like to_date) (UDFs not supported
                             yet...), while -fullTable means that all partitions (or
                             a whole un-partitioned table) should be moved. One but
                             only one option must be specified among -c
                             "<condition>" and -fullTable.
   <before days>           Optional, saying that table/partitions should be moved
                             only when they are created (not updated or modified)
                             more than some days before from now.
   <parallelism>           The maximum concurrency when copying partitions, 1 by
                             default.
   <OSS storage policy>    Storage policy for OSS destination, which can be Standard
                             (by default), IA, Archive, or ColdArchive. Not applicable for destinations other
                             than OSS. NOTE: if you are willing to use ColdArchive storage policy, please
                             make sure that Cold Archive has been enabled for your OSS bucket.
   
   -o/-overWrite           Overwriting the final paths where the data would be moved.
                             For partitioned tables this overwrites partitions locations
                             which are subdirectories of <destination path>; for
                             un-partitioned table this overwrites the <destination path>
                             itself.
   -r/-removeSource        Let the source data be removed when the corresponding
                             table/partition is successfully moved to the new destination.
                             Otherwise (by default), the source data would be left as it
                             was.
   -skipTrash              Applicable only when [-r/-removeSource] is enabled. If
                             present, source data would be immediately deleted from the
                             file system, bypassing the trash.
   -e/-explain             If present, the command would not really move data, but only
                             prints the table/partitions that would be moved for given
                             conditions.
   <log directory>         A directory to locate log files, '/tmp/<current user>/' by
                             default.

   • 命令格式

     sudo jindo table -moveTo \
       -t <dbName.tableName> \
       -d <destination path> \
       [-c "<condition>" | -fullTable] \
       [-b/-before <before days>] \
       [-p/-parallel <parallelism>] \
       [-s/-storagePolicy <OSS storage policy>] \
       [-o/-overWrite] \
       [-r/-removeSource] \
       [-skipTrash] \
       [-e/-explain] \
       [-l/-logDir <log directory>]

   • 命令说明

     参数	是否必选	描述
     -t <dbName.tableName>	是	待移动的表名称，格式为数据库名.表名。 数据库和表名之前以半角句号（.）分隔。表可以是分区表或非分区表。
     -d <destination path>	是	待移动的目标位置。无论是移动分区还是移动非分区表的整表，该位置都对应 "表" 一级的位置。如果移动的是分区，则分区的完整路径是该路径+分区名。例如<destination path>/p1=v1/p2=v2/。
     -c "<condition>" | -fullTable	否	两者必须指定其中一个。即您可以指定-c "<condition>"，或者指定-fullTable。 指定-fullTable时，则为移动整表，既可以是非分区表也可以是分区表。 指定-c "<condition>"时，则提供了一个过滤条件，用来选择希望移动的分区，支持常见运算符，例如大于号（>）。 例如，数据类型为String的分区ds，希望分区名大于 'd'，则代码为-c " ds > 'd' "。
     -b/before <before days>	否	仅创建时间距离当前时间超过一定天数的表或者分区才会被移动。
     -p/-parallel <parallelism>	否	迁移操作的并行度。
     -s/-storagePolicy <OSS storage policy>	否	OSS-HDFS服务不支持该选项。
     -o/-overWrite	否	是否强制覆盖目标写入路径。如果是分区表，则只会清空待移动分区的分区路径，不会清空整个表路径。
     -r/-removeSource	否	移动完成，元数据也同步更新后，是否清理源路径。如果是分区表，则只会清理成功移动的分区的源路径。
     -skipTrash	否	清理源路径时是否跳过Trash。 说明 该选项需与-r/-removeSource选项同时使用。
     -e/-explain	否	如果出现该选项，则为解释（explain ）模式，只会显示待移动的分区列表，而不会真正移动数据。
     -l/-logDir <log directory>	否	指定Log文件目录。 默认值：/tmp/<current user>/

3. 将分区数据迁移至OSS-HDFS服务。

   1. 查看待迁移的分区是否符合预期。

      结合-e 选项仅列举待迁移的分区，但不会真正执行迁移任务。

      sudo jindotable -moveTo -t tdb.test_table -d oss://examplebucket.cn-hangzhou.oss-dls.aliyuncs.com/data/tdb.test_table -c " dt > 'v' " -e

      返回结果如下：

      Found 1 partitions to move:
            dt=value-2
      MoveTo finished for table tdb.test_table to destination oss://examplebucket.cn-hangzhou.oss-dls.aliyuncs.com/data/tdb.test_table with condition " dt > 'v' " (explain only).

   2. 将分区迁移至OSS-HDFS服务。

      sudo jindotable -moveTo -t tdb.test_table -d oss://examplebucket.cn-hangzhou.oss-dls.aliyuncs.com/data/tdb.test_table  -c " dt > 'v' " 

      返回结果如下：

      Found 1 partitions in total, and all are successfully moved.
      Successfully moved partitions:
          dt=value-2
      No failed partition.
      MoveTo finished for table tdb.test_table to destination oss://examplebucket.cn-hangzhou.oss-dls.aliyuncs.com/data/tdb.test_table with condition " dt > 'v' ".

   3. 通过查看Location属性，验证分区是否成功迁移。

      sudo hive> desc formatted test_table partition (dt='value-2');

      返回结果如下：

      OK
      # col_name              data_type               comment
      id                      int
      content                 string
      
      # Partition Information
      # col_name              data_type               comment
      dt                      string
      
      # Detailed Partition Information
      Partition Value:        [value-2]
      Database:               tdb
      Table:                  test_table
      CreateTime:             UNKNOWN
      LastAccessTime:         UNKNOWN
      Location:               oss://examplebucket.cn-hangzhou.oss-dls.aliyuncs.com/data/tdb.test_table/dt=value-2

   4. 可选：将分区从OSS-HDFS迁移至HDFS。

      sudo jindotable -moveTo -t tdb.test_table -d hdfs://<hdfs-path>/user/hive/warehouse/tdb.db/test_table  -c " dt > 'v' "

      返回结果如下：

      No successfully moved partition.
      Failed partitions:
          dt=value-2    New location is not empty but -overWrite is not enabled.
      MoveTo finished for table tdb.test_table to destination hdfs://<hdfs-path>/user/hive/warehouse/tdb.db/test_table with condition -c " dt > 'v' ".

      返回结果提示No successfully moved partition.，原因是HDFS目标目录非空。如果确认目标目录可以丢弃，您可以使用-overWrite选项强制覆盖目标目录，确保将分区从OSS-HDFS迁移至HDFS。

      sudo jindotable -moveTo -t tdb.test_table -d hdfs://<hdfs-path>/user/hive/warehouse/tdb.db/test_table  -c " dt > 'v' "

      迁移成功后，返回结果如下：

      Found 1 partitions in total, and all are successfully moved.
      Successfully moved partitions:
          dt=value-2
      No failed partition.
      MoveTo finished for table tdb.test_table to destination hdfs:///user/hive/warehouse/tdb.db/test_table with condition " dt > 'v' ", overwriting new locations.

异常处理

如果迁移表或分区时迁移失败并提示Conflicts found，请通过以下方法处理该问题。

• 确保同一时间不存在其他命令向相同的目标路径迁移数据，例如DistCp、JindoDistCp等分布式拷贝命令。

• 删除目标目录。对于非分区表，删除表一级目录。对于分区表，删除存在冲突的分区级目录。

• 请勿删除源目录。