PolarDB：Configure backup policies

Procedure

1. Log on to the PolarDB console.

2. In the upper-left corner, select the region in which the cluster is deployed.

3. Find the cluster and click its ID.

4. In the left-side navigation pane, choose Settings and Management > Backup and Restoration.

5. On the Backup Policy Settings tab, click Modify.Modify

6. In the Modify dialog box, configure the Data Backup, Log Backup, and General policy parameters and then click OK.

   • Data backup policy

     • If the storage type is PSL4 or PSL5, data backup is classified into two levels based on the storage location: level-1 backup and level-2 backup. You must set the following parameters.

       Backup type	Parameter	Description
       Level-1 Backup	Backup Method	You can select Standard Backup (at specified intervals) or High-frequency Backup based on your business requirements. Standard Backup (at specified intervals): performs automatic backup once on each of the specified days of the week. You can set the backup cycle and start time based on your business requirements. Note To prevent data loss, make sure that standard backup is performed at least twice a week. Backup files cannot be deleted. High-frequency Backup: performs multiple automatic backups within 24 hours. This backup method increases backup frequency to speed up data restoration in PolarDB. You can configure the system to perform a backup once every two, three, or four hours. The first backup is created two hours after you configure the backup policy regardless of the backup frequency you specify. After you enable enhanced backup, all backups are retained for 24 hours. For backup files that are created earlier than the previous 24 hours, the system permanently retains only the first backup that is created after 00:00 every day and deletes the rest. For example, if you specify a backup frequency of every 4 hours at 08:00 on March 1, the system automatically creates the first backup within 4 hours from 08:00 to 12:00 on March 1. Then, the system continues to create a backup every 4 hours. If the current time is 16:00 on March 4, the system retains the following backups: The backups created within the last 24 hours (from 16:00 on March 3 to 16:00 on March 4). The backup created between 00:00 and 4:00 on March 3. The backup created between 00:00 and 4:00 on March 2. The backup created between 08:00 and 12:00 on March 1. Then, after four hours or at 20:00 on March 4, the system retains the following backups: The backups created within the last 24 hours from 20:00 on March 3 to 20:00 on March 4. The backup created between 00:00 and 4:00 on March 3. The backup created between 00:00 and 4:00 on March 2. The backup created between 08:00 and 12:00 on March 1.
       	Backup Cycle	The days of the week on which automatic data backups are performed. Note This parameter is required only when Standard Backup is selected.
       	Backup Start Time Range	The time range within which automatic data backups are performed. Note This parameter is required only when Standard Backup is selected.
       	Backup Frequency	The interval at which automatic backups are performed. Valid values: Last 24 Hours, Every 2 Hours, Last 24 Hours, Every 3 Hours, or Last 24 Hours, Every 4 Hours. Note This parameter is required only when High-frequency Backup is selected.
       	Backup Retention Period	The retention period of level-1 backups. Note By default, level-1 backup is enabled and level-1 backups are retained for 7 days. You can specify a retention period for level-1 backups in the range of 3 to 14 days.
       Level-2 Backup	Level-2 Backup	Specifies whether to enable the level-2 backup feature. Note By default, the level-2 backup feature is disabled. If you enable the feature, you are charged additional fees. You can delete level-2 backup files to reduce costs. For information about the billing rules for level-2 backups, see Billing rules for backup storage that exceeds the free quota.
       	Backup Method	Valid values: Same-region Backup and Cross-region Backup. Note By default, same-region backup is selected. If you select both Same-region Backup and Cross-region Backup, two copies of the backup data are dumped.
       	Backup Cycle	The days on which level-2 backup is performed. Note You can only select the days specified in the Backup Cycle parameter for level-1 backups.
       	Same-region Backup and Retention	The retention period of same-region level-2 backups. Note You can specify a retention period for same-region level-2 backups in the range of 30 to 7,300 days. If you want to retain same-region level-2 backups for a long period of time, select Long-term Retain Backups before Cluster Deletion. After you select this option, you cannot specify the retention period for same-region level-2 backups.
       	Destination Backup Region	The region in which the backup data is to be stored.
       	Cross-region Backup and Retention	The retention period of cross-region level-2 backups. Note You can specify a retention period for cross-region level-2 backups in the range of 30 to 7,300 days. If you want to retain cross-region level-2 backups for a long period of time, select Long-term Retain Backups before Cluster Deletion. After you select this option, you cannot specify the retention period for cross-region level-2 backups.

   • Log backup policy

     When you configure a redo log backup policy, you must specify the retention period of redo logs.

     Parameter	Description
     Backup Method	Valid values: Same-region Backup and Cross-region Backup. Note By default, the log backup feature is enabled and cannot be disabled. Cross-region log backup can be enabled only when cross-region level-2 backup is enabled.
     Same-region Backup and Retention	The retention period of same-region log backups. Note You can specify a retention period for same-region log backups in the range of 3 to 7,300 days. If you want to retain same-region log backups for a long period of time, select Long-term Retain Backups before Cluster Deletion. After you select this option, you cannot specify the retention period of same-region log backups.
     Destination Backup Region	The value of the parameter is the same as the value of the Destination Backup Region parameter for level-2 backup. You do not need to specify this parameter.
     Cross-region Backup and Retention	The retention period of cross-region log backups. Note You can specify a retention period for cross-region log backups in the range of 3 to 7,300 days. If you want to retain cross-region log backups for a long period of time, select Long-term Retain Backups before Cluster Deletion. After you select this option, you cannot specify the retention period for cross-region log backups.

   • General retention policy

     You can configure a backup retention policy that applies when you delete a cluster.

     Parameter

     Description

     When Cluster Is Deleted

     The backup retention policy that applies when you delete a cluster. When the cluster is deleted, the cluster data is automatically backed up, and all backup sets of the cluster are retained for a long period of time: retains all backups when you delete a cluster. When the cluster is deleted, the cluster data is automatically backed up, and the backup set is retained for a long period of time: retains the most recent backup when you delete a cluster. When the cluster is released, all backup sets of the cluster are deleted immediately: does not retain backups when you delete a cluster. Note If you select When the cluster is deleted, the cluster data is automatically backed up, and all backup sets of the cluster are retained for a long period of time., or When the cluster is deleted, the cluster data is automatically backed up, and the backup set is retained for a long period of time. policy, the system runs an automatic backup task to retain all data when you delete the PolarDB cluster. After you delete a cluster, level-1 backups automatically become level-2 backups. You can go to the Cluster Recycle Bin page to view all the retained backups. For more information, see Restore a released cluster. If you select the cross-region backup method and select the When the cluster is released, all backup sets of the cluster are deleted immediately retention policy, all cross-region backup sets are deleted when you delete the cluster. If you select other policies, the configured retention policies apply.

Related API operations