Virtual Private Cloud:Use custom route tables to manage network traffic

Step 1: Create a custom route table

1. Log on to the VPC console.

2. In the left-side navigation pane, click Route Tables.

3. In the top navigation bar, select the region where you want to create a custom route table.

4. On the Route Tables page, click Create Route Table.

5. On the Create Route Table page, set the following parameters and click OK.

   • VPC: Select the VPC to which the custom route table belongs.

   • Associated Resource Type: Select the type of resource with which you want to associate the route table.

     • vSwitch: Controls traffic routing policies.

     • Border Gateway: Controls inbound traffic routing policies of border gateway.

   On the Route Tables page, you can view route tables classified as Custom, which is in the Route Table Type column. The following system routes are automatically added to the custom route table:

   • A route whose destination CIDR block is 100.64.0.0/10. This route is used for communication among cloud resources in the VPC.

   • A route destined for the CIDR block of a vSwitch of the VPC to which the route table belongs. This route is used for communication between cloud resources within the vSwitch.

   For example, the CIDR block of your VPC is 192.168.0.0/16 and you create two vSwitches whose respective CIDR blocks are 192.168.1.0/24 and 192.168.0.0/24 in the VPC. The custom route table that you create for your VPC includes the following system routes, where the hyphen (-) indicates the VPC:

   Destination CIDR Block	Next Hop	Type
   100.64.0.0/10	-	System Route
   192.168.1.0/24	-	System Route
   192.168.0.0/24	-	System Route

Step 2: Add a custom route to the custom route table

1. On the Route Table page, find the custom route table that you want to manage and click its ID.

2. On the details page, choose Route Entry List > Custom Route and click Add Route Entry.

3. In the Add Route Entry dialog box, configure the following parameters and click OK.

   Parameter	Description
   Destination CIDR Block	Enter the destination CIDR block. IPv4 CIDR Block: The destination CIDR block is an IPv4 address range. IPv6 CIDR Block: The destination CIDR block is an IPv6 address range. Note When the route table is a system route table and the associated resource is a custom route table of a vSwitch, you can set Destination CIDR Block to IPv6 CIDR Block. For more information on the available regions, see Regions that support VPC features. VPC Prefix List: The destination CIDR block is a prefix list.
   Next Hop Type	Select a next hop type. Valid values: The following types of next hop are supported if Destination CIDR Block is set to IPv4 CIDR Block or VPC Prefix List: IPv4 Gateway: Traffic destined for the destination CIDR block is routed to the specified IPv4 gateway. NAT Gateway: Traffic destined for the destination CIDR block is routed to the specified NAT Gateway. VPC Peering Connection: Traffic destined for the destination CIDR block is routed to the specified VPC peering connection. Transit Router: Traffic destined for the destination CIDR block is routed to the specified transit routers. VPN Gateway: Traffic destined for the destination CIDR block is routed to the specified VPN gateway. ECS Instance: Traffic destined for the destination CIDR block is routed to the specified Elastic Compute Service (ECS). Select this type if you want to route traffic to an ECS instance for centralized traffic forwarding and management. For example, you can set an ECS instance as the Internet-facing gateway to route traffic from other ECS instances to the Internet. ENI: Traffic destined for the destination CIDR block is routed to a specified elastic network interface (ENI). HaVip: Traffic destined for the destination CIDR block is routed to the specified high-availability virtual IP address (HAVIP). Router Interface (to VBR): Traffic destined for the destination CIDR block is routed to the router interface that is associated with a VBR. Select this type if you want to connect the VPC to a data center through Express Connect circuits. You must also select from the following routing modes: General Routing: Select an associated router interface. Active/Standby Routing: Select two instances as the next hops. The active route has a weight of 100 and the standby route has a weight of 0. If the active route fails a health check, the standby route will take control. Load Balancing Routing: Select two to eight instances as the next hops. The instances must have the same weight, which must be an integer from 0 to 255. Network traffic is evenly distributed across the next hops. Router Interface (to VPC): Traffic destined for the destination CIDR block is routed to a specified VPC. ECR: Traffic destined for the destination CIDR block is routed to the specified Express Connect Router (ECR).
   	If the region of the route table supports IPv6 CIDR blocks and you select IPv6 CIDR Block for Destination CIDR Block, the following next hop types are supported: ECS Instance: Traffic destined for the destination CIDR block is routed to the specified ECS Instance. IPv6 Gateway: Traffic destined for the destination CIDR block is routed to the specified IPv6 Gateway. ENI: Traffic destined for the destination CIDR block is routed to the specified ENI. Router Interface (to VBR): Traffic destined for the destination CIDR block is routed to the router interface that is associated with VBR. Select this type if you want to connect the VPC to a data center through Express Connect circuits. You must also select from the following routing modes: General Routing: Select an associated router interface. Load Balancing Routing: Select two to eight instances as the next hops. The instances must have the same weight, which must be an integer from 0 to 255. Network traffic is evenly distributed across the next hops. ECR: Traffic destined for the destination CIDR block is routed to the specified ECR. VPC Peering Connection: Traffic destined for the destination CIDR block is routed to a specified VPC peering connection.
   After you specify the Next Hop Type, you can select an instance as the next hop. You can also go to the product page to create an instance.

Step 3: Associate the custom route table with a vSwitch

You can associate the custom route table with a vSwitch to manage the routes of the vSwitch.

1. On the Route Table page, find the custom route table that you want to manage and click its ID.

2. On the details page of the route table, click the Associate vSwitch tab and click Associate vSwitch.

3. In the Associate vSwitch dialog box, choose the vSwitch that you want to associate.

   On the Associate vSwitch tab, click the vSwitch ID in the vSwitch column to go to the vSwitch details page. Then, click the Route tab. In the Associated with Route Table section, you can verify that the route table associated with the vSwitch is a custom route table.

Modify system route entries

You can modify the next hop of system route entries in a custom route table to direct traffic to ECS Instance or ENI for dynamic traffic management.

1. On the Route Table page, select the desired route table instance by clicking its ID.

2. Under the Route Entry List > System Route Entries tab, locate the system route entry to modify, and click Edit in the Operation column.

3. In the Edit Route Table Entry dialog box, adjust the parameters as necessary.

   Configuration	Description
   Destination CIDR Block	Shows the destination CIDR block for traffic. The Destination CIDR Block is not modifiable.
   Next Hop Type	Choose the next hop type: Local, ECS Instance, or Elastic Network Interface.
   After you select a Next Hop Type, you must choose a specific instance from the corresponding list or create one through the product page.

Modify custom route entries

You can modify the next hop of custom route entries to manage network traffic and direct the traffic toward specific cloud resources.

1. Navigate to the Route Table page and click the ID of the route table you want to modify.

2. Click the Route Entry List > Custom Route tab, find the custom route entry that you want to manage, and click Edit in the Actions column.

3. In the Modify Route Table dialog box, update the following parameters:

   Parameter	Description
   Destination CIDR Block	The destination CIDR block is displayed and cannot be modified.
   Next Hop Type	Select the next hop type from the available options.
   After you select a Next Hop Type, you must then select a specific instance from the drop-down list or create a new instance on the corresponding product page.

Delete custom route entries

You can delete custom route entries in the following two ways:

• Individually: Find the custom route entry that you want to delete and click Delete in the Actions column.

• In batch: Select all the custom route entries that you want to delete and click Delete at the bottom of the page.

Enable and disable route advertisement

You can manage whether to receive dynamic routes by enabling the route advertisement feature.

1. On the Route Tables page, find the route table that you want to manage and click its ID.

2. In the Route Table Details section, enable the Accept Advertised Routes feature as needed.

   • Accept Advertised Routes enabled: Receives routes from dynamic sources. You can view details of dynamic routes on the Dynamic Route tab when they are advertised to the VPC.

   • Accept Advertised Routes disabled: Stops receiving new routes from dynamic routes and removes existing dynamic routes from the route table. Proceed with caution.

     Note

     • Currently, only dynamic routes from ECRs can be disabled.

     • A VPC can be associated with only one ECR instance at a time. After disabling and re-enabling the Accept Advertised Routes feature, the route table reconfigures and adds dynamic routes based on the dynamic routes it receives from the ECR.

       For example, there are four dynamic route entries from the ECR. When the route advertisement is turned off, these entries are cleared. Later, if two new dynamic routes are added afterward and the feature is turned back on, the VPC will have six dynamic routes.

Delete the custom route table

On the Route Table page, locate the custom route table to delete and click Delete in the Actions column.