ModifySagRemoteAccess - Smart Access Gateway - Alibaba Cloud Documentation Center

Modifies the remote access IP address of a Smart Access Gateway (SAG) device.

Debugging

OpenAPI Explorer automatically calculates the signature value. For your convenience, we recommend that you call this operation in OpenAPI Explorer.

Debug

Authorization information

The following table shows the authorization information corresponding to the API. The authorization information can be used in the Action policy element to grant a RAM user or RAM role the permissions to call this API operation. Description:

Operation: the value that you can use in the Action element to specify the operation on a resource.
Access level: the access level of each operation. The levels are read, write, and list.
Resource type: the type of the resource on which you can authorize the RAM user or the RAM role to perform the operation. Take note of the following items:
- The required resource types are displayed in bold characters.
- If the permissions cannot be granted at the resource level, All Resources is used in the Resource type column of the operation.
Condition Key: the condition key that is defined by the cloud service.
Associated operation: other operations that the RAM user or the RAM role must have permissions to perform to complete the operation. To complete the operation, the RAM user or the RAM role must have the permissions to perform the associated operations.

Operation	Access level	Resource type	Condition key	Associated operation
smartag:ModifySagRemoteAccess	Write	All Resources *	none	none

Request parameters

Parameter	Type	Required	Description	Example
SmartAGId	string	Yes	The ID of the corresponding SAG instance.	sag-r79m060r6oy55******
SerialNumber	string	Yes	The serial number (SN) of the SAG device.	sag-100-v1p7-9
RemoteAccessIp	string	No	The remote access IP address of the SAG device.	10.10.10.2

Response parameters

Parameter	Type	Description	Example
	object
SerialNumber	string	The SN of the SAG device.	sag61a344**
RemoteAccessIp	string	The remote access IP address.	10.10.10.2
RequestId	string	The ID of the request.	4FF203D7-462D-498E-94F9-2B2FA462DD23
Success	boolean	Indicates whether the API call is successful.	true
Code	string	The returned status code.	200
Message	string	The message returned after calling the API.	Successful

Examples

Sample success responses

JSONformat

{
  "SerialNumber": "sag61a344**",
  "RemoteAccessIp": "10.10.10.2",
  "RequestId": "4FF203D7-462D-498E-94F9-2B2FA462DD23",
  "Success": true,
  "Code": "200",
  "Message": "Successful"
}

Error codes

HTTP status code	Error code	Error message	Description
400	VersionNotExist	The specified version does not exist.	The specified version does not exist.
403	FeatureNotSupport	The current edition of the smart access gateway does not support this feature.	The current version of Smart Access Gateway does not support this feature.
403	InvalidId.SMARTAG	The specified smart access gateway instance id is invalid.	The SAG instance ID is invalid.
403	SmartAccessGatewayNotOnline	The specified smart access gateway is not online.	The specified SAG device is disconnected. The operation cannot be processed.
403	FeatureNotSupportForStandBySmartAG	The current edition of the standby smart access gateway does not support this feature.	The current version of Smart Access Gateway does not support this feature.
403	FeatureNotSupportForActiveSmartAG	The current edition of the active smart access gateway does not support this feature.	The current edition of the active SAG instance does not support this feature.
403	IllegalRemoteIp.Conflict	The specified IP address has been used.	The specified IP address has been used.
403	IllegalRemoteIp.RouteTableEntryConflict	The specified IP address conflicts with route table entries.	The specified IP address conflicts with route table entries.

For a list of error codes, visit the Service error codes.