CreateNetworkInterface - Elastic Compute Service - Alibaba Cloud Documentation Center

Creates an elastic network interface (ENI). When you call this operation, you can specify parameters, such as VSwitchId and PrimaryIpAddress, in the request.

Operation description

Usage notes

Take note of the following items:

This operation is a synchronous operation. After an ENI is created, it immediately enters the Available (Available) state and can be attached to an Elastic Compute Service (ECS) instance.
If NetworkInterfaceId is empty in the response, no ENI is created. Call the operation again to create an ENI.
An ENI can be attached only to a single instance that resides in a virtual private cloud (VPC).
When an ENI is detached from an instance and attached to another instance, the attributes of the ENI remain unchanged and network traffic is redirected to the new instance.
When you call this operation to create an ENI, you can assign up to 49 secondary private IP addresses to the ENI.
If you want to assign IPv6 addresses when you create an ENI, make sure that IPv6 is enabled for the vSwitch with which you want to associate the ENI. For more information, see What is an IPv6 gateway?
A quota is imposed on the number of ENIs that can be created per Alibaba Cloud region per account. You can view the quota in the ECS console. For more information, see View and increase resource quotas.

For information about examples on how to call this operation, see Create an ENI.

Debugging

You can run this interface directly in OpenAPI Explorer, saving you the trouble of calculating signatures. After running successfully, OpenAPI Explorer can automatically generate SDK code samples.

Debug

Authorization information

The following table shows the authorization information corresponding to the API. The authorization information can be used in the Action policy element to grant a RAM user or RAM role the permissions to call this API operation. Description:

Operation: the value that you can use in the Action element to specify the operation on a resource.
Access level: the access level of each operation. The levels are read, write, and list.
Resource type: the type of the resource on which you can authorize the RAM user or the RAM role to perform the operation. Take note of the following items:
- The required resource types are displayed in bold characters.
- If the permissions cannot be granted at the resource level, All Resources is used in the Resource type column of the operation.
Condition Key: the condition key that is defined by the cloud service.
Associated operation: other operations that the RAM user or the RAM role must have permissions to perform to complete the operation. To complete the operation, the RAM user or the RAM role must have the permissions to perform the associated operations.

Operation	Access level	Resource type	Condition key	Associated operation
ecs:CreateNetworkInterface	create	NetworkInterface `acs:ecs:{#regionId}:{#accountId}:eni/` SecurityGroup `acs:ecs:{#regionId}:{#accountId}:securitygroup/{#securitygroupId}` VSwitch `acs:vpc:{#regionId}:{#accountId}:vswitch/{#vswitchId}`	vpc:IsDefaultVSwitch vpc:IsDefaultVpc vpc:VPC vpc:tag	none

Request parameters

Parameter	Type	Required	Description	Example
RegionId	string	Yes	The region in which to create the ENI. You can call the DescribeRegions operation to query the most recent region list.	cn-hangzhou
Tag	array<object>	No	The tags to add to the ENI.
	object	No	Tag N to add to the ENI.
Key	string	No	The key of tag N to add to the ENI. Valid values of N: 1 to 20. The tag key cannot be an empty string. The tag key can be up to 128 characters in length. It cannot start with aliyun or acs: and cannot contain `http://` or `https://`.	TestKey
Value	string	No	The value of tag N to add to the ENI. Valid values of N: 1 to 20. The tag value can be an empty string. The tag value can be up to 128 characters in length and cannot contain `http://` or `https://`.	TestValue
ResourceGroupId	string	No	The ID of the resource group to which you want to assign the ENI. You can call the ListResourceGroups operation to query the most recent resource group list.	rg-bp67acfmxazb4ph****
VSwitchId	string	Yes	The ID of the vSwitch with which to associate the ENI. Private IP addresses are assigned to the ENI from within the CIDR block of the vSwitch.	vsw-bp1s5fnvk4gn2tws03****
PrimaryIpAddress	string	No	The primary private IP address of the ENI. The specified IP address must be an idle IP address within the CIDR block of the vSwitch with which to associate the ENI. If this parameter is not specified, an idle IP address is assigned from within the vSwitch CIDR block at random.	172.17..
SecurityGroupId	string	No	The ID of the security group to which to assign the ENI. The security group and the ENI must belong to the same VPC. Note You must specify `SecurityGroupId` or `SecurityGroupIds.N` but not both.	sg-bp1fg655nh68xyz9i****
NetworkInterfaceName	string	No	The name of the ENI. The name must be 2 to 128 characters in length and can contain letters, digits, colons (:), underscores (_), periods (.), and hyphens (-). This parameter is left empty by default.	testNetworkInterfaceName
Description	string	No	The description of the ENI. The description must be 2 to 256 characters in length and cannot start with `http://` or `https://`. This parameter is empty by default.	testDescription
Visible	boolean	No	Note This parameter is no longer used.	null
InstanceType	string	No	The type of the ENI. Valid values: Secondary: secondary ENI. Trunk: trunk ENI. This value is in invitational preview. Default value: Secondary.	null
BusinessType	string	No	Note This parameter is no longer used.	null
SecondaryPrivateIpAddressCount	integer	No	The number of private IP addresses to be assigned by ECS. Valid values: 1 to 49.	1
QueueNumber	integer	No	The number of queues supported by the ENI. Valid values: 1 to 2048. When you attach the ENI to an instance, make sure that the value of this parameter is less than the maximum number of queues per ENI that is allowed for the instance type. To view the maximum number of queues per ENI allowed for an instance type, you can call the DescribeInstanceTypes operation and then check the return value of `MaximumQueueNumberPerEni`. This parameter is left empty by default. If you do not specify this parameter, the default number of queues per ENI for the instance type of an instance is used when you attach the ENI to the instance. To view the default number of queues per ENI for an instance type, you can call the DescribeInstanceTypes operation and then check the return value of `SecondaryEniQueueNumber`.	1
ClientToken	string	No	The client token that is used to ensure the idempotence of the request. You can use the client to generate the token, but you must make sure that the token is unique among different requests. The token can contain only ASCII characters and cannot exceed 64 characters in length. For more information, see How to ensure idempotence.	123e4567-e89b-12d3-a456-426655440000
NetworkInterfaceTrafficMode	string	No	The communication mode of the ENI. Valid values: Standard: uses the TCP communication mode. HighPerformance: uses the remote direct memory access (RDMA) communication mode with Elastic RDMA Interface (ERI) enabled. Note ENIs in RDMA mode can be attached only to instances of the instance types that support ERIs. The number of ENIs in RDMA mode that are attached to an instance cannot exceed the maximum number of ENIs that the instance type supports. For more information, see Overview of ECS instance families and Configure eRDMA on an enterprise-level instance. Default value: Standard.	Standard
QueuePairNumber	integer	No	Note This parameter is in invitational preview and is not publicly available.	22
SecurityGroupIds	array	No	The IDs of security groups to which to assign the ENI. The security groups and the ENI must belong to the same VPC. The valid values of N are determined based on the maximum number of security groups to which an ENI can be assigned. For more information, see Limits . Note You must specify `SecurityGroupId` or `SecurityGroupIds.N` but not both.
	string	No	The ID of security group N to which to assign the ENI. The security group and the ENI must belong to the same VPC. The valid values of N are determined based on the maximum number of security groups to which an ENI can be assigned. For more information, see Limits . Note You must specify `SecurityGroupId` or `SecurityGroupIds.N` but not both.	sg-bp1fg655nh68xyz9i****
PrivateIpAddress	array	No	Secondary private IP addresses to assign to the ENI. The IP addresses must be idle IP addresses in the CIDR block of the vSwitch with which to associate the ENI. Valid values of N: 0 to 10. Note To assign secondary private IP addresses to the ENI, you can specify the `PrivateIpAddress.N` or `SecondaryPrivateIpAddressCount` parameter, but not both.
	string	No	Secondary private IP address N to assign to the ENI. This IP address must be an idle IP address within the CIDR block of the vSwitch with which to associate the ENI. Valid values of N: 0 to 10. Note To assign secondary private IP addresses to the ENI, you can specify the `PrivateIpAddress.N` or `SecondaryPrivateIpAddressCount` parameter, but not both.	172.17..
Ipv6Address	array	No	IPv6 addresses to assign to the ENI. Valid values of N: 1 to 10. Example: Ipv6Address.1=2001:db8:1234:1a00::** Note** To assign IPv6 addresses to the ENI, you must specify the `Ipv6Addresses.N` or `Ipv6AddressCount` parameter, but not both.
	string	No	IPv6 address N to assign to the ENI. Valid values of N: 1 to 10. Example: Ipv6Address.1=2001:db8:1234:1a00::** Note** To assign IPv6 addresses to the ENI, you must specify the `Ipv6Addresses.N` or `Ipv6AddressCount` parameter, but not both.	2001:db8:1234:1a00::****
Ipv6AddressCount	integer	No	The number of IPv6 addresses to randomly generate for the ENI. Valid values: 1 to 10. Note To assign IPv6 addresses to the ENI, you must specify the `Ipv6Addresses.N` or `Ipv6AddressCount` parameter, but not both.	1
Ipv4Prefix	array	No	IPv4 prefixes to assign to the ENI. Valid values of N: 1 to 10. Note To assign IPv4 prefixes to the ENI, you must specify the Ipv4Prefix.N or Ipv4PrefixCount parameter, but not both.
	string	No	IPv4 prefix N to assign to the ENI. Valid values of N: 1 to 10. Note To assign IPv4 prefixes to the ENI, you must specify the Ipv4Prefix.N or Ipv4PrefixCount parameter, but not both.	hide
Ipv4PrefixCount	integer	No	The number of IPv4 prefixes to assign to the ENI. Valid values: 1 to 10. Note To assign IPv4 prefixes to the ENI, you must specify the Ipv4Prefix.N or Ipv4PrefixCount parameter, but not both.	hide
Ipv6Prefix	array	No	IPv6 prefixes to assign to the ENI. Valid values of N: 1 to 10. Note To assign IPv6 prefixes to the ENI, you must specify the Ipv6Prefix.N or Ipv6PrefixCount parameter, but not both.
	string	No	IPv6 prefix N to assign to the ENI. Valid values of N: 1 to 10. Note To assign IPv6 prefixes to the ENI, you must specify the Ipv6Prefix.N or Ipv6PrefixCount parameter, but not both.	hide
Ipv6PrefixCount	integer	No	The number of IPv6 prefixes to assign to the ENI. Valid values: 1 to 10. Note To assign IPv6 prefixes to the ENI, you must specify the Ipv6Prefix.N or Ipv6PrefixCount parameter, but not both.	hide
DeleteOnRelease	boolean	No	Specifies whether to release the ENI when the associated instance is released. Valid values: true false	true
TxQueueSize	integer	No	The transmit (Tx) queue depth of the ENI. Take note of the following items: The Tx queue depth of an ENI must be the same as the Rx queue depth of the ENI. Valid values: powers of 2 in the range of 8192 to 16384. A larger Tx queue depth yields higher outbound throughput but consumes more memory.	8192
RxQueueSize	integer	No	The receive (Rx) queue depth of the ENI. Take note of the following items: The Rx queue depth of an ENI must be the same as the Tx queue depth of the ENI. Valid values: powers of 2 in the range of 8192 to 16384. A larger Rx queue depth yields higher inbound throughput but consumes more memory.	8192
NetworkInterfaceTrafficConfig	object	No	The communication settings of the ENI.
QueueNumber	integer	No	The number of queues supported by the ENI.	8
NetworkInterfaceTrafficMode	string	No	The communication mode of the ENI.	HighPerformance
QueuePairNumber	integer	No	The number of queues supported by the ERI.	8
TxQueueSize	integer	No	The transmit (Tx) queue depth of the ENI.	8192
RxQueueSize	integer	No	The receive (Rx) queue depth of the ENI.	8192
ConnectionTrackingConfiguration	object	No	Note This parameter is not publicly available.
TcpEstablishedTimeout	integer	No	Note This parameter is not publicly available.	910
TcpClosedAndTimeWaitTimeout	integer	No	Note This parameter is not publicly available.	3
UdpTimeout	integer	No	Note This parameter is not publicly available.	30
EnhancedNetwork	object	No	Note This parameter is unavailable.
EnableSriov	boolean	No	Note This parameter is not publicly available.	true

Response parameters

Parameter	Type	Description	Example
	object
Status	string	The state of the ENI.	Available
Type	string	The type of the ENI.	Secondary
VpcId	string	The ID of the VPC to which the ENI belongs.	vpc-bp1j7w3gc1cexjqd****
NetworkInterfaceName	string	The name of the ENI.	my-eni-name
MacAddress	string	The media access control (MAC) address of the ENI.	00:16:3e:12::
NetworkInterfaceId	string	The ID of the ENI.	eni-bp14v2sdd3v8htln****
ServiceID	long	The ID of the distributor to which the ENI belongs.	12345678910
OwnerId	string	The ID of the account to which the ENI belongs.	123456****
ServiceManaged	boolean	Indicates whether the user of the ENI is an Alibaba Cloud service or a distributor.	true
VSwitchId	string	The ID of the vSwitch to which the ENI is connected.	vsw-bp16usj2p27htro3****
RequestId	string	The request ID.	473469C7-AA6F-4DC5-B3DB-A3DC0DE3C83E
Description	string	The description of the ENI.	testDescription
ResourceGroupId	string	The ID of the resource group to which the ENI belongs.	rg-2ze88m67qx5z****
ZoneId	string	The zone ID of the ENI.	cn-hangzhou-e
PrivateIpAddress	string	The private IP address of the ENI.	172.17..
SecurityGroupIds	array	The IDs of the security groups to which the ENI belongs.
SecurityGroupId	string	The ID of the security group.	sg-bp18kz60mefsicfg****
PrivateIpSets	array<object>	The private IP addresses.
PrivateIpSet	object
PrivateIpAddress	string	The private IP address of the instance.	172.17..
Primary	boolean	Indicates whether the private IP address is the primary private IP address.	true
Tags	array<object>	The tags of the ENI.
Tag	object
TagValue	string	The tag value.	TestValue
TagKey	string	The tag key.	TestKey
Ipv6Sets	array<object>	The IPv6 addresses assigned to the ENI.
Ipv6Set	object
Ipv6Address	string	The IPv6 address assigned to the ENI.	2001:db8:1234:1a00::****
Ipv4PrefixSets	array<object>	The IPv4 prefixes assigned to the ENI.
Ipv4PrefixSet	object
Ipv4Prefix	string	The IPv4 prefix assigned to the ENI.	hide
Ipv6PrefixSets	array<object>	The IPv6 prefixes assigned to the ENI.
Ipv6PrefixSet	object
Ipv6Prefix	string	The IPv6 prefix assigned to the ENI.	hide

Examples

Sample success responses

JSONformat

{
  "Status": "Available",
  "Type": "Secondary",
  "VpcId": "vpc-bp1j7w3gc1cexjqd****",
  "NetworkInterfaceName": "my-eni-name",
  "MacAddress": "00:16:3e:12:**:**",
  "NetworkInterfaceId": "eni-bp14v2sdd3v8htln****",
  "ServiceID": 12345678910,
  "OwnerId": "123456****",
  "ServiceManaged": true,
  "VSwitchId": "vsw-bp16usj2p27htro3****",
  "RequestId": "473469C7-AA6F-4DC5-B3DB-A3DC0DE3C83E",
  "Description": "testDescription",
  "ResourceGroupId": "rg-2ze88m67qx5z****",
  "ZoneId": "cn-hangzhou-e",
  "PrivateIpAddress": "172.17.**.**",
  "SecurityGroupIds": {
    "SecurityGroupId": [
      "sg-bp18kz60mefsicfg****"
    ]
  },
  "PrivateIpSets": {
    "PrivateIpSet": [
      {
        "PrivateIpAddress": "172.17.**.**",
        "Primary": true
      }
    ]
  },
  "Tags": {
    "Tag": [
      {
        "TagValue": "TestValue",
        "TagKey": "TestKey"
      }
    ]
  },
  "Ipv6Sets": {
    "Ipv6Set": [
      {
        "Ipv6Address": "2001:db8:1234:1a00::****"
      }
    ]
  },
  "Ipv4PrefixSets": {
    "Ipv4PrefixSet": [
      {
        "Ipv4Prefix": "hide"
      }
    ]
  },
  "Ipv6PrefixSets": {
    "Ipv6PrefixSet": [
      {
        "Ipv6Prefix": "hide"
      }
    ]
  }
}

Error codes

HTTP status code	Error code	Error message	Description
400	MissingParameter	%s	A parameter is not specified.
400	UnsupportedParameter	%s	The parameter is not supported.
400	InvalidParameter	%s	The specified parameter is invalid.
400	InvalidInstanceID.Malformed	%s	The specified InstanceId parameter is invalid.
400	InvalidOperation.InvalidEcsState	%s	-
400	InvalidOperation.InvalidEniState	%s	-
400	InvalidOperation.DetachPrimaryEniNotAllowed	%s	-
400	Forbidden.RegionId	%s	The service is unavailable in the current region.
400	Duplicate.TagKey	The Tag.N.Key contain duplicate key.	The specified tag key already exists. Tag keys must be unique.
400	InvalidTagKey.Malformed	The specified Tag.n.Key is not valid.	The specified Tag.N.Key parameter is invalid.
400	InvalidTagValue.Malformed	The specified Tag.n.Value is not valid.	The specified tag value is invalid.
400	JoinedGroupLimitExceed	%s	The maximum number of security groups to which the specified resource can be added has been reached. For more information, see the return value of the %s placeholder in the error message.
400	InvalidParameter.SecurityGroupIdRepeated	%s	-
400	InvalidSecurityGroupId.SingleIdAndMultiIdConflict	%s	-
400	InvalidParameter.Conflict	%s	The specified parameter is invalid. Check whether parameter conflicts exist. %s is a variable. An error message is dynamically returned based on call conditions.
400	InvalidConnectionTrackingConfiguration.RegionOrUserNotSupported	The specified parameter ConnectionTrackingConfiguration is not supported in this region, or this account is not in the whitelist of using network interface ConnectionTrackingConfiguration.	The specified parameter ConnectionTrackingConfiguration is not supported in this region, or this account is not in the whitelist of using network interface ConnectionTrackingConfiguration.
400	InvalidOperation.EniCountExceeded	%s.	The maximum number of NICs in the Enterprise Security Group has been reached.
400	InvalidPrivateIpAddress.Duplicated	The specified private IP address "%s" is duplicated.	The specified IP address is already in use.
400	IncorrectVSwitchStatus	The operation is not allowed in the current VSwitch state. Expecting state includes "Created Available", but current state is "%s".	The operation is not supported in the current state of the vSwitch.
400	InvalidEniQueueSize.RegionOrUserNotSupported	The specified parameter "RxQueueSize" or "TxQueueSize" is not supported in this region or this account is not allowed to use ENI QueueSize.	You are not authorized to specify the length of NIC queues or cannot specify the length of NIC queues in the current region.
400	InvalidParameter.EniQueueSize	The specified parameter "TxQueueSize" and "RxQueueSize" are not equal or the value must be 8192 or 16384.	The specified parameter TxQueueSize and RxQueueSize are not equal or not the allowed value.
400	InvalidParameter.EniConnectionTrackingConfiguration	The specified ENI connection tracking configuration "%s" must be between %s and %s.	The network connection configuration specified by the network card exceeds the allowable range
400	InvalidPrivateIpAddress.Duplicated	The specified private IP address is already in use.	The specified IP address is already in use.
400	IncorrectVSwitchStatus	The current status of virtual switch does not support this operation.	The specified vSwitch is in the Pending state and cannot be deleted.
400	QuotaExceeded.PrivateIpAddress	There are not enough private IPs in the specified VSwitch.	The current VSwitch does not have enough Ip
403	InvalidUserType.NotSupported	%s	Your account does not support this operation.
403	Abs.InvalidAccount.NotFound	%s	Your Alibaba Cloud account does not exist or your AccessKey pair has expired.
403	Forbidden.NotSupportRAM	%s	RAM users are not authorized to perform this operation.
403	Forbidden.SubUser	%s	You are not authorized to manage this resource. Contact the owner of the Alibaba Cloud account for authorization.
403	InValidParameter	%s	The specified parameter is invalid.
403	MaxEniCountExceeded	%s	The maximum number of ENIs that can be managed has been reached.
403	EniPerInstanceLimitExceeded	%s	The maximum number of ENIs that can be attached to the specified instance has been reached.
403	InvalidOperation.AvailabilityZoneMismatch	%s	The operation is invalid.
403	InvalidOperation.VpcMismatch	%s	The operation is invalid. Check whether the VPC in the operation corresponds to other parameters.
403	SecurityGroupInstanceLimitExceed	%s	-
403	InvalidSecurityGroupId.NotVpc	%s	The specified SecurityGroupId parameter is invalid and the network type of the security group is not VPC.
403	InvalidOperation.InvalidEniType	%s	-
403	InvalidVSwitchId.IpNotEnough	%s	The number of available IP addresses on the specified vSwitch is insufficient.
403	InvalidVSwitchId.IpInvalid	%s	The specified private IP address is invalid.
403	QuotaExceed.Tags	%s	The number of specified tags exceeds the upper limit. %s is a variable. An error message is dynamically returned based on call conditions.
403	InvalidIp.Address	%s	-
403	InvalidIp.IpRepeated	%s	The specified IP address already exists.
403	MaxEniPrivateIpsCountExceeded	%s	The maximum number of secondary private IP addresses that can be assigned to the specified ENI has been exceeded. For more information, see the return value of the %s placeholder in the error message.
403	InvalidOperation.ResourceManagedByCloudProduct	%s	You cannot modify security groups managed by cloud services.
403	InvalidOperation.TrunkingIsNotAllowed	%s	-
403	InvalidParameter.InvalidEniQueueNumber	%s	-
403	InvalidOperation.MaxEniQueueNumberExceeded	%s	-
403	InvalidOperation.ExceedInstanceTypeQueueNumber	%s	The maximum number of queues for all ENIs on an instance has been exceeded. For more information, see the return value of the %s placeholder in the error message.
403	InvalidParameter.EniTrafficMode	%s	-
403	InvalidOperation.HighPerformanceTrafficModeIsNotAllowed	%s	-
403	InvalidParameter.QueuePairNumberMustEmpty	%s	-
403	InvalidParameter.InvalidQueuePairNumber	%s	-
403	InvalidParameter.EniTrafficMode	The eni business type not support HighPerformance traffic mode.	The specified ENI type does not support the RDMA communication mode.
403	InvalidParams.NetworkInterfaceName	%s	-
403	InvalidIp.IpPrefixIllegal	The ip prefixes %s is/are illegal.	The IP address prefix is invalid and is not in the CIDR format.
403	InvalidIp.IpPrefixMustInReserveSegment	The ip prefix must in vswitch reserve segment.	The IP address prefix is invalid and is not in the reserved CIDR block of the vSwitch.
403	InvalidOperation.Ipv4CountExceeded	%s	The operation is valid because the maximum number of IPv4 addresses has been reached.
403	InvalidOperation.Ipv6CountExceeded	%s	The operation is valid because the maximum number of IPv6 addresses has been reached.
403	InvalidOperation.HighPerformanceTrafficModeEniUnsupported	High performance traffic mode does not support the current ENI type. Expected ENI type is "%s" but the current ENI type is "%s".	High performance traffic mode does not support the current ENI type.
403	AclLimitExceed	%s	The number of ACL rules for an ENI or instance exceeds the upper limit.
403	InvalidIp.IpPrefixMaskInvalid	The IP prefix mask %s is illegal which must be between %s and %s.	The IP prefix mask is invalid and is not in the valid range.
403	InvalidVSwitchId.IpPrefixNotEnough	The specified VSwitch does not have enough IP prefixes.	The number of IP prefixes in the specified switch is insufficient.
403	InvalidIp.IpPrefixMaskNotSame	The IP prefixes %s are illegal.The IP prefix mask must be the same.	The IP prefix masks are not the same.
403	EnterpriseGroupLimited.MutliGroupType	The specified instance can't associate security group of different types.	The specified instance cannot be added to both a common security group and an enterprise security group. You can call the DescribeSecurityGroups query to specify the type of security group.
403	InvalidOperation.BoundingEniSlaveQuotaExceed	The number of Slave ENIs exceeds the limit of Bond ENI.	The number of Slave ENIs exceeds the limit of Bond ENI.
403	InvalidIp.IpPrefixNotAvailable	The IP prefix is not available.	The IP prefix is not free.
403	InvalidIp.IpPrefixMaskIllegal	The current IP prefix mask is illegal.	Illegal IP prefix mask.
403	InvalidIp.IpPrefixNotStrict	The IP prefix "%s" must be strict CIDR format.	Invalid IP prefix, not strictly cidr.
403	InvalidOperation.NotSupport	The specified region does not support allocating IPv6 when creating ENI.	The specified region does not support allocating IPv6 when creating ENI.
404	InvalidEcsId.NotFound	%s	The specified instance ID does not exist.
404	InvalidEniId.NotFound	%s	The specified ENI ID does not exist.
404	InvalidVSwitchId.NotFound	%s	The specified vSwitch does not exist.
404	InvalidSecurityGroupId.NotFound	%s	The specified security group ID does not exist.
404	InvalidResourceGroup.NotFound	The ResourceGroup provided does not exist in our records.	The specified resource group does not exist.
404	InvalidVSwitchId.NotFound	The specified VSwitchId is not found.	-
404	InvalidOperation.MaxEniIpv6IpsCountExceeded	The ipv6 address count exceed limitation.	-
404	InvalidOperation.VSwitchIpv6Disabled	The specified VSwitch does not support Ipv6 feature.	The specified VSwitch does not support IPv6.
404	InvalidOperation.EnableIpv6Failed	The specified VSwitch does not support Ipv6 feature.	-
404	InvalidOperation.AddressAlreadyAllocated	The specified ipv6 has been already allocated.	-
404	InvalidOperation.AddressNotInVSwitchCidr	The specified ipv6 does not match VSwitch cidr scope.	-
404	InvalidOperation.MaxEniIpv6IpsCountExceeded	%s	-
404	InvalidOperation.SlaveEniMustHaveBondingEni	Ensure you create the corresponding Bond ENI before creating Slave ENI.	You must create a Bond network card before creating a Slave network card.
404	InvalidOperation.EniTrafficModeNotSupportIpv6	The High Performance(RDMA) traffic mode does not support IPv6.	ENIs that use the RDMA communication mode do not support IPv6.
404	InvalidOperation.AddressAlreadyAllocated	The specified IP has already been allocated.	The specified IP address is already in use.
404	InvalidOperation.VSwitchCidrReservationNotExist	The specified VSwitch does not have CIDR reservation.	The specified switch does not have a reserved segment available.
404	InvalidOperation.VSwitchIpv6Disabled	%s.	The specified switch does not support IPv6.
500	InternalError	The request processing has failed due to some unknown error, exception or failure.	An internal error has occurred. Try again later.
500	InvalidOperation.RegionNotSupportIpPrefix	The current region does not support IP prefix feature.	The region does not support IP prefix allocation.

For a list of error codes, visit the Service error codes.

Change history

Change time	Summary of changes	Operation
2024-11-05	The Error code has changed. The request parameters of the API has changed. The response structure of the API has changed	View Change Details
2024-08-19	The Error code has changed	View Change Details
2024-07-03	The Error code has changed	View Change Details
2024-07-03	The Error code has changed. The request parameters of the API has changed	View Change Details
2024-06-26	The Error code has changed	View Change Details
2024-05-17	The Error code has changed. The request parameters of the API has changed	View Change Details
2024-05-07	The Error code has changed. The request parameters of the API has changed	View Change Details
2024-02-28	The Error code has changed	View Change Details
2024-01-24	The Error code has changed. The request parameters of the API has changed	View Change Details
2023-10-09	The Error code has changed. The request parameters of the API has changed	View Change Details
2023-04-26	The Error code has changed	View Change Details
2021-07-05	The Error code has changed. The request parameters of the API has changed. The response structure of the API has changed	View Change Details