Data Transmission Service:Migrate data from an ApsaraDB RDS for MySQL instance to a self-managed MySQL database

Usage notes

• DTS uses read and write resources of the source and destination databases during full data migration. This may increase the loads of the database servers. If the database performance is unfavorable, the specification is low, or the data volume is large, database services may become unavailable. For example, DTS occupies a large amount of read and write resources in the following cases: a large number of slow SQL queries are performed on the source database, the tables have no primary keys, or a deadlock occurs in the destination database. Before you migrate data, evaluate the impact of data migration on the performance of the source and destination databases. We recommend that you migrate data during off-peak hours. For example, you can migrate data when the CPU utilization of the source and destination databases is less than 30%.

• The source database must have PRIMARY KEY or UNIQUE constraints and all fields must be unique. Otherwise, the destination database may contain duplicate data records.

• During full data migration, concurrent INSERT operations cause fragmentation in the tables of the destination database. After full data migration is complete, the size of used tablespace of the destination database is larger than that of the source database.

• If a data migration task fails, DTS automatically resumes the task. Therefore, before you switch your workloads to the destination database, stop or release the data migration task. Otherwise, the data in the source database overwrites the data in the destination database after the task is resumed.

• You cannot enable throttling for full data migration.

Limits

• DTS supports the following types of objects for schema migration: table, view, trigger, stored procedure, and function.

  Note

  During schema migration, DTS changes the value of the SECURITY attribute from DEFINER to INVOKER for views, stored procedures, and functions.

• DTS does not migrate user information from the source database. After data migration is complete, if you want to call a view, stored procedure, or function of the destination database, you must grant the read and write permissions to INVOKER.

Migration types

Billing

SQL operations that can be synchronized during incremental data migration

Permissions required for database accounts

For more information about how to create and authorize a database account, see the following topics:

• ApsaraDB RDS for MySQL: Create an account on an ApsaraDB RDS for MySQL instance and Modify the permissions of a standard account on an ApsaraDB RDS for MySQL instance

• Self-managed MySQL database: Create an account for a self-managed MySQL database and configure binary logging

Procedure

1. Log on to the DTS console.

   Note

   If you are redirected to the Data Management (DMS) console, you can click the icon in the to go to the previous version of the DTS console.

2. In the left-side navigation pane, click Data Migration.

3. At the top of the Migration Tasks page, select the region where the destination cluster resides.

4. In the upper-right corner of the page, click Create Migration Task.

5. Configure the source and destination databases.

   

   Section	Parameter	Description
   N/A	Task Name	The task name that DTS automatically generates. We recommend that you specify a descriptive name that makes it easy to identify the task. You do not need to specify a unique task name.
   Source Database	Instance Type	Select RDS Instance.
   	Instance Region	The region where the source ApsaraDB RDS for MySQL instance resides.
   	RDS Instance ID	The ID of the source ApsaraDB RDS for MySQL instance.
   	Database Account	The database account of the ApsaraDB RDS for MySQL instance. For more information about the permissions that are required for the account, see Permissions required for database accounts.
   	Database Password	The password of the database account. Note After you set the source database parameters, click Test Connectivity next to Database Password to check whether the information is valid. If the information is valid, the Passed message is displayed. If the Failed message is displayed, click Check next to Failed to modify the information based on the check results.
   	Encryption	Select Non-encrypted or SSL-encrypted. If you select SSL-encrypted, you must enable SSL encryption for the ApsaraDB RDS for MySQL instance before you configure the data migration task. For more information, see Configure SSL encryption for an ApsaraDB RDS for MySQL instance. Note The Encryption parameter is available only for regions in the Chinese mainland and the China (Hong Kong) region.
   Destination Database	Instance Type	The location in which the self-managed MySQL database is deployed. In this example, User-Created Database in ECS Instance is selected. Note If the source self-managed database is of another type, you must set up the environment that is required for the database. For more information, see Preparation overview.
   	Instance Region	The region where the ECS instance is deployed.
   	ECS Instance ID	The ID of the ECS instance on which the self-managed MySQL database is deployed.
   	Database Type	In this example, MySQL is selected.
   	Port Number	The service port number of the self-managed MySQL database. In this example, port 3306 is used.
   	Database Account	The account of the self-managed MySQL database. For information about the permissions that are required for the account, see Permissions required for database accounts.
   	Database Password	The password of the database account. Note After you set the destination database parameters, click Test Connectivity next to Database Password to check whether the information is valid. If the information is valid, the Passed message is displayed. If the Failed message is displayed, click Check next to Failed to modify the information based on the check results.
   	Encryption	Select Non-encrypted or SSL-encrypted. In this example, Non-encrypted is selected.

6. In the lower-right corner of the page, click Set Whitelist and Next.

   Warning

   If the CIDR blocks of DTS servers are automatically or manually added to the whitelist of the database or instance, or to the ECS security group rules, security risks may arise. Therefore, before you use DTS to migrate data, you must understand and acknowledge the potential risks and take preventive measures, including but not limited to the following measures: enhance the security of your username and password, limit the ports that are exposed, authenticate API calls, regularly check the whitelist or ECS security group rules and forbid unauthorized CIDR blocks, or connect the database to DTS by using Express Connect, VPN Gateway, or Smart Access Gateway.

7. Select the migration types and the objects to be migrated.

   

   Setting	Description
   Select the migration types	To perform only full migration, select Schema Migration and Full Data Migration. To ensure service continuity during data migration, select Schema Migration, Full Data Migration, and Incremental Data Migration. Note If Incremental Data Migration is not selected, we recommend that you do not write data to the source database during data migration. This ensures data consistency between the source and destination databases.
   Select the objects to be migrated	Select one or more objects from the Available section and click the icon to move the objects to the Selected section. Note You can select columns, tables, or databases as the objects to be migrated. By default, after an object is migrated to the destination database, the name of the object remains unchanged. You can use the object name mapping feature to rename the objects that are migrated to the destination database. For more information, see Object name mapping. If you use the object name mapping feature to rename an object, other objects that are dependent on the object may fail to be migrated.
   Specify whether to rename objects	You can use the object name mapping feature to rename the objects that are migrated to the destination instance. For more information, see Object name mapping.
   Specify the retry time for failed connections to the source or destination database	By default, if DTS fails to connect to the source or destination database, DTS retries within the next 720 minutes (12 hours). You can specify the retry time based on your needs. If DTS reconnects to the source and destination databases within the specified time, DTS resumes the data migration task. Otherwise, the data migration task fails. Note When DTS retries a connection, you are charged for the DTS instance. We recommend that you specify the retry time based on your business needs. You can also release the DTS instance at your earliest opportunity after the source and destination instances are released.
   Specify whether to copy temporary tables to the destination database when DMS performs online DDL operations on the source table	If you use Data Management (DMS) to perform online DDL operations on the source database, you can specify whether to migrate temporary tables generated by online DDL operations. Yes: DTS migrates the data of temporary tables generated by online DDL operations. Note If online DDL operations generate a large amount of data, the data migration task may be delayed. No: DTS does not migrate the data of temporary tables generated by online DDL operations. Only the original DDL data of the source database is migrated. Note If you select No, the tables in the destination database may be locked.

8. In the lower-right corner of the page, click Precheck.

   Note

   • Before you can start the data migration task, DTS performs a precheck. You can start the data migration task only after the task passes the precheck.

   • If the task fails to pass the precheck, you can click the icon next to each failed item to view details.

     • You can troubleshoot the issues based on the causes and run a precheck again.

     • If you do not need to troubleshoot the issues, you can ignore failed items and run a precheck again.

9. After the task passes the precheck, click Next.

10. In the Confirm Settings dialog box, specify the Channel Specification parameter and select Data Transmission Service (Pay-As-You-Go) Service Terms.

11. Click Buy and Start to start the data migration task.

    • Schema migration and full data migration

      We recommend that you do not manually stop the task during full data migration. Otherwise, the data migrated to the destination database may be incomplete. You can wait until the data migration task automatically stops.

    • Schema migration, full data migration, and incremental data migration

      An incremental data migration task does not automatically stop. You must manually stop the task.

      Important

      We recommend that you select an appropriate time to manually stop the data migration task. For example, you can stop the task during off-peak hours or before you switch your workloads to the destination cluster.

      1. Wait until Incremental Data Migration and The migration task is not delayed appear in the progress bar of the migration task. Then, stop writing data to the source database for a few minutes. The latency of incremental data migration may be displayed in the progress bar.

      2. Wait until the status of incremental data migration changes to The migration task is not delayed again. Then, manually stop the migration task.