All Products
Search

This Product

    Auto Scaling:ExecuteScalingRule

    Document Center

    Auto Scaling:ExecuteScalingRule

    Last Updated:Jun 13, 2024

    Executes a scaling rule. You can manually execute scaling rules to adjust the number of ECS instances or elastic container instances. You can also enable Auto Scaling to execute scaling rules. You must manually call the ExecuteScalingRule operation to execute simple scaling rules and step scaling rules. Auto Scaling can execute only target tracking scaling rules and predictive scaling rules.

    Usage notes

    Before you call the ExecuteScalingRule operation, make sure that the following requirements are met:

    • The following requirements must be met:

      • The specified scaling group is in the Active state.

      • The scaling group does not have scaling activities in progress.

    • If the scaling group has no scaling activities in progress, the operation can trigger scaling activities even before the cooldown period of the scaling group expires.

    • If the addition of a specific number of Elastic Compute Service (ECS) instances to the scaling group causes the total number of ECS instances in the scaling group to exceed the maximum allowed number, Auto Scaling stops adding ECS instances to the scaling group when the total number of instances is equal to the maximum allowed number.

    • If the removal of a specific number of ECS instances from the scaling group causes the total number of ECS instances in the scaling group to be less than the minimum allowed number, Auto Scaling stops removing ECS instances from the scaling group when the total number of instances is equal to the minimum allowed number.

    A successful call indicates that Auto Scaling has accepted the request. Nevertheless, the scaling activity itself may still fail. You can obtain the status of a scaling activity based on the value of ScalingActivityId in the response.

    Note

    You can add or remove only a limited number of ECS instances at a time. For more information, see the AdjustmentValue parameter in CreateScalingRule.

    Debugging

    OpenAPI Explorer automatically calculates the signature value. For your convenience, we recommend that you call this operation in OpenAPI Explorer. OpenAPI Explorer dynamically generates the sample code of the operation for different SDKs.

    Request parameters

    Parameter

    Type

    Required

    Example

    Description

    Action

    String

    Yes

    ExecuteScalingRule

    The operation that you want to perform. Set the value to ExecuteScalingRule.

    ScalingRuleAri

    String

    Yes

    ari:acs:ess:cn-hangzhou:140692647406****:scalingrule/asr-bp1dvirgwkoowxk7****

    The unique identifier of the scaling rule.

    Note

    You can call this operation to execute only simple scaling rules and step scaling rules. If you want to execute a step scaling rule, you must specify BreachThreshold and MetricValue.

    ClientToken

    String

    No

    123e4567-e89b-12d3-a456-426655440000

    The client token that is used to ensure the idempotence of the request.

    You can use the client to generate the token, but you must make sure that the token is unique among different requests. The token can contain only ASCII characters and cannot exceed 64 characters in length. For more information, see Ensure idempotence.

    BreachThreshold

    Float

    No

    1.0

    The breach threshold of the step scaling rule. Valid values: -9.999999E18 to 9.999999E18.

    MetricValue

    Float

    No

    1.0

    The metric value of the step scaling rule. Valid values: -9.999999E18 to 9.999999E18.

    RegionId

    String

    No

    cn-qingdao

    The region ID of the scaling rule.

    Response parameters

    Parameter

    Type

    Example

    Description

    ScalingActivityId

    String

    asa-bp13o672yeautiil****

    The ID of the scaling activity.

    RequestId

    String

    473469C7-AA6F-4DC5-B3DB-A3DC0DE3****

    The request ID.

    Examples

    Sample requests

    http(s)://ess.aliyuncs.com/?Action=ExecuteScalingRule
&ScalingRuleAri=ari:acs:ess:cn-hangzhou:140692647406****:scalingrule/asr-bp1dvirgwkoowxk7****
&ClientToken=123e4567-e89b-12d3-a456-426655440000
&BreachThreshold=1.0
&MetricValue=1.0
&RegionId=cn-qingdao
&<Common request parameters>

    Sample success responses

    XML format

    HTTP/1.1 200 OK
Content-Type:application/xml

<ExecuteScalingRuleResponse>
    <ScalingActivityId>asa-bp13o672yeautiil****</ScalingActivityId>
    <RequestId>473469C7-AA6F-4DC5-B3DB-A3DC0DE3****</RequestId>
</ExecuteScalingRuleResponse>

    JSON format

    HTTP/1.1 200 OK
Content-Type:application/json

{
  "ScalingActivityId" : "asa-bp13o672yeautiil****",
  "RequestId" : "473469C7-AA6F-4DC5-B3DB-A3DC0DE3****"
}

    Error codes

    For a list of error codes, see Service error codes.

    HttpCode

    Error code

    Error message

    Description

    404

    InvalidScalingRuleAri.NotFound

    The specified scaling rule Ari does not exist.

    The specified scaling rule does not exist in the Alibaba Cloud account.

    403

    Forbidden.Unauthorized

    A required authorization for the specified action is not supplied.

    Auto Scaling is not authorized to call the operation.

    400

    IncorrectScalingGroupStatus

    The current status of the specified scaling group does not support this action.

    The scaling group to which the specified scaling rule belongs is not in the Active state.

    400

    ScalingActivityInProgress

    You cannot delete a scaling group or launch a new scaling activity while there is a scaling activity in progress for the specified scaling group.

    The scaling group of the specified scaling rule has a scaling activity in progress.

    400

    InsufficientBalance

    Your account does not have enough balance.

    The balance of your Alibaba Cloud account is insufficient.

    400

    QuotaExceed.Instance

    Living instance quota exceeded.

    The maximum number of ECS instances has been reached.

    400

    IncorrectLoadBalancerStatus

    The current status of the specified load balancer does not support this action.

    The load balancer that is attached to the scaling group of the specified scaling rule is not in the Active state.

    400

    IncorrectLoadBalancerHealthCheck

    The current health check type of specified load balancer does not support this action.

    The Health Check feature is not enabled for the load balancer that is attached to the scaling group of the specified scaling rule.

    400

    InvalidLoadBalancerId.IncorrectInstanceNetworkType

    The network type of the instance in specified load balancer does not support this action.

    The network type of an ECS instance that is attached to the load balancer in use is different from the network type of the scaling group.

    400

    InvalidLoadBalancerId.VPCMismatch

    The specified virtual switch and the instance in specified load balancer are not in the same VPC.

    An ECS instance that is attached to the specified load balancer does not reside in the same VPC as the vSwitch that is specified by VSwitchId.

    400

    IncorrectDBInstanceStatus

    The current status of DB instance "XXX" does not support this action.

    The ApsaraDB RDS instance that is attached to the scaling group of the specified scaling rule is not in the Running state.

    400

    QuotaExceeded.DBInstanceSecurityIP

    Security IP quota exceeded in DB instance "XXX".

    The maximum number of IP addresses in the IP address whitelist of the ApsaraDB RDS instance that is attached to the scaling group of the specified scaling rule has been reached.

    400

    QuotaExceeded.SecurityGroupInstance

    Instance quota exceeded in the specified security group.

    The maximum number of ECS instances that are associated with the specified security group has been reached.

    400

    IncorrectCapacity.NoChange

    To execute the specified scaling rule, the total capacity will not change.

    The number of instances in the scaling group remains unchanged after the scaling rule is executed.

    400

    QuotaExceeded.ScalingInstance

    Scaling instance quota exceeded.

    The maximum number of ECS instances that is allowed has been reached.

    400

    QuotaExceeded.AfterpayInstance

    Living afterpay instance quota exceeded.

    The maximum number of pay-as-you-go ECS instances that is allowed has been reached.

    400

    ResourceNotAvailable.ECS

    The specified region or zone does not offer the specified disk or instance category.

    The ECS instances of the specified instance type or that use the specified disk category cannot be created in the specified region.

    400

    ScalingRule.InvalidScalingRuleType

    Specific scaling rule type: %s can not be executed.

    The specified type of scaling rule cannot be executed.

    400

    InvalidStepAdjustments.NoStepFound

    No adjustment step found for a metric value of: %s.

    No matching adjustment steps are found for the specified metric.

    400

    MissingParameter.MetricValue

    Metric value must be specified for StepScalingRule.

    No metric value is specified for the step scaling rule.

    400

    MissingParameter.BreachThreshold

    Breach threshold must be specified for StepScalingRule.

    No threshold is specified for the step scaling rule.

    400

    MetricValueBeyondPermitRange

    Specific parameter "%s" beyond permit range.

    The specified metric value is invalid.

    400

    BreachThresholdBeyondPermitRange

    Specific parameter "%s" beyond permit range.

    The specified threshold is invalid.