All Products
Search

This Product

    Elastic Compute Service：ModifySecurityGroupEgressRule

    Document Center

    Elastic Compute Service：ModifySecurityGroupEgressRule

    更新時間：Dec 23, 2024

    Modifies an outbound security group rule in a security group.

    Operation description

    Take note of the following items:

    • An authorization object in a security group rule can be of one of the following types: IPv4 CIDR block or address, IPv6 CIDR block or address, security group, or prefix list. You cannot call this operation to change the type of an existing authorization object. For example, if an authorization object is an IPv4 CIDR block, you can change the authorization object to a different IPv4 CIDR block or an IPv4 address, but you cannot change the authorization object to an IPv6 CIDR block or address, a security group, or a prefix list.
    • You cannot delete the value of a non-empty parameter. If you want to delete the values of non-empty parameters, we recommend that you create a security group rule and delete the original security group rule.

    Debugging

    You can run this interface directly in OpenAPI Explorer, saving you the trouble of calculating signatures. After running successfully, OpenAPI Explorer can automatically generate SDK code samples.

    Authorization information

    The following table shows the authorization information corresponding to the API. The authorization information can be used in the Action policy element to grant a RAM user or RAM role the permissions to call this API operation. Description:

    • Operation: the value that you can use in the Action element to specify the operation on a resource.
    • Access level: the access level of each operation. The levels are read, write, and list.
    • Resource type: the type of the resource on which you can authorize the RAM user or the RAM role to perform the operation. Take note of the following items:
      • The required resource types are displayed in bold characters.
      • If the permissions cannot be granted at the resource level, All Resources is used in the Resource type column of the operation.
    • Condition Key: the condition key that is defined by the cloud service.
    • Associated operation: other operations that the RAM user or the RAM role must have permissions to perform to complete the operation. To complete the operation, the RAM user or the RAM role must have the permissions to perform the associated operations.
    OperationAccess levelResource typeCondition keyAssociated operation
    ecs:ModifySecurityGroupEgressRuleupdate
    *SecurityGroup
    acs:ecs:{#regionId}:{#accountId}:securitygroup/{#securitygroupId}
    • ecs:tag
    • ecs:SecurityGroupIpProtocols
    • ecs:SecurityGroupSourceCidrIps
    		none

    Request parameters

    ParameterTypeRequiredDescriptionExample
    RegionIdstringYes

    The region ID of the security group. You can call the DescribeRegions operation to query the most recent region list.

    		cn-hangzhou
    ClientTokenstringNo

    The client token that is used to ensure the idempotence of the request. You can use the client to generate the token, but you must make sure that the token is unique among different requests. The token can contain only ASCII characters and cannot exceed 64 characters in length.**** For more information, see How to ensure idempotence.

    		123e4567-e89b-12d3-a456-426655440000
    SecurityGroupIdstringYes

    The ID of the security group.

    		sg-bp67acfmxazb4p****
    SecurityGroupRuleIdstringNo

    The ID of the security group rule. You can call the DescribeSecurityGroupAttribute operation to query the IDs of security group rules in a security group.

    		sgr-bp67acfmxazb4q****
    PolicystringNo

    The action of the security group rule. Valid values:

    • accept: allows access.
    • drop: denies access and returns no responses.

    Default value: accept.

    		accept
    PrioritystringNo

    The priority of the security group rule. Valid values: 1 to 100.

    Default value: 1.

    		1
    IpProtocolstringYes

    The transport layer protocol of the security group rule. The value of this parameter is case-insensitive. Valid values:

    • ICMP
    • GRE
    • TCP
    • UDP
    • ALL: All protocols are supported.
    		tcp
    DestCidrIpstringNo

    The destination IPv4 CIDR block. IPv4 CIDR blocks and IPv4 addresses are supported.

    By default, this parameter is left empty.

    		10.0.0.0/8
    Ipv6DestCidrIpstringNo

    The destination IPv6 CIDR block. IPv6 CIDR blocks and IPv6 addresses are supported.

    Note Only the IP addresses of instances in virtual private clouds (VPCs) are supported. You cannot specify both Ipv6DestCidrIp and DestCidrIp.

    By default, this parameter is left empty.

    		2001:db8:1233:1a00::***
    DestGroupIdstringNo

    The ID of the destination security group. You must specify at least one of DestGroupId and DestCidrIp.

    • At least one of DestGroupId, DestCidrIp, Ipv6DestCidrIp, and DestPrefixListId must be specified.
    • If DestGroupId is specified but DestCidrIp is not specified, the NicType parameter can be set only to intranet.
    • If both DestGroupId and DestCidrIp are specified, DestCidrIp takes precedence.
    		sg-bp67acfmxa123b****
    DestPrefixListIdstringNo

    The ID of the destination prefix list. You can call the DescribePrefixLists operation to query the IDs of available prefix lists.

    If you specify DestCidrIp, Ipv6DestCidrIp, or DestGroupId, this parameter is ignored.

    		pl-x1j1k5ykzqlixdcy****
    PortRangestringYes

    The range of destination ports that correspond to the transport layer protocol. Valid values:

    • If you set IpProtocol to TCP or UDP, the port number range is 1 to 65535. Separate the start port number and the end port number with a forward slash (/). Example: 1/200.
    • If you set IpProtocol to ICMP, the port number range is -1/-1.
    • If you set IpProtocol to GRE, the port number range is -1/-1.
    • If you set IpProtocol to ALL, the port number range is -1/-1.
    		80/80
    SourceCidrIpstringNo

    The source IPv4 CIDR block. IPv4 CIDR blocks and IPv4 addresses are supported.

    By default, this parameter is left empty.

    		10.0.0.0/8
    Ipv6SourceCidrIpstringNo

    The source IPv6 CIDR block. IPv6 CIDR blocks and IPv6 addresses are supported.

    Note Only the IP addresses of instances in VPCs are supported. You cannot specify both Ipv6SourceCidrIp and SourceCidrIp.

    By default, this parameter is left empty.

    		2001:db8:1234:1a00::***
    SourcePortRangestringNo

    The range of source ports that correspond to the transport layer protocol. Valid values:

    • If you set IpProtocol to TCP or UDP, the port number range is 1 to 65535. Separate the start port number and the end port number with a forward slash (/). Example: 1/200.
    • If you set IpProtocol to ICMP, the port number range is -1/-1.
    • If you set IpProtocol to GRE, the port number range is -1/-1.
    • If you set IpProtocol to ALL, the port number range is -1/-1.
    		80/80
    DestGroupOwnerAccountstringNo

    The Alibaba Cloud account that manages the destination security group when you set security group rule N across accounts.

    		EcsforCloud@Alibaba.com
    DestGroupOwnerIdlongNo

    The ID of the Alibaba Cloud account that manages the destination security group when you set security group rule N across accounts.

    		1234567890
    NicTypestringNo

    The network interface controller (NIC) type.

    Note You cannot modify this parameter when you modify a security group rule by specifying the ID of the rule. If you want to change the NIC type of a security group rule, you can create a security group rule of a desired NIC type and delete the existing rule.
    		intranet
    DescriptionstringNo

    The description of the security group rule. The description must be 1 to 512 characters in length.

    		This is a new securitygroup rule.

    Response parameters

    ParameterTypeDescriptionExample
    object
    RequestIdstring

    The request ID.

    		473469C7-AA6F-4DC5-B3DB-A3DC0DE3C83E

    Examples

    Sample success responses

    JSONformat

    {
  "RequestId": "473469C7-AA6F-4DC5-B3DB-A3DC0DE3C83E"
}

    Error codes

    HTTP status codeError codeError messageDescription
    400OperationDeniedThe specified IpProtocol does not exist or IpProtocol and PortRange do not match.The specified IP protocol does not exist or does not match the specified port range.
    400InvalidIpProtocol.MalformedThe specified parameter PortRange is not valid.The specified IpProtocol or PortRange parameter is invalid.
    400InvalidDestCidrIp.MalformedThe specified parameter DestCidrIp is not valid.The specified DestCidrIp parameter is invalid.
    400InvalidPolicy.MalformedThe specified parameter Policy is not valid.The specified Policy parameter is invalid.
    400InvalidNicType.ValueNotSupportedThe specified NicType does not exist.The specified NicType parameter does not exist.
    400InvalidNicType.MismatchThe specified NicType conflicts with the authorization record.The specified NIC type does not match the existing rule.
    400InvalidDestGroupId.MismatchSpecified security group and destination group are not in the same VPC.The specified source and destination security groups do not belong to the same VPC.
    400InvalidDestGroup.NotFoundSpecified destination security group does not exist.The specified DestGroupId parameter does not exist.
    400InvalidPriority.MalformedThe specified parameter Priority is not valid.The specified Priority parameter is invalid.
    400InvalidPriority.ValueNotSupportedThe specified Priority is invalid.Your specified priority is invalid.
    400InvalidNicType.ValueNotSupportedThe specified NicType is not valid.The specified NIC type does not exist.
    400InvalidSecurityGroupDiscription.MalformedThe specified security group rule description is not valid.The specified security group rule description is invalid.
    400InvalidSecurityGroup.InvalidNetworkTypeThe specified security group network type is not support this operation, please check the security group network types. For VPC security groups, ClassicLink must be enabled.The operation is not supported while the security group is of the current network type. If the network type is VPC, ClassicLink must be enabled.
    400MissingParameter.DestOne of the parameters DestCidrIp, DestGroupId or DestPrefixListId must be specified.At least one of the DestCidrIp, DestGroupId, and DestPrefixListId parameters must be specified.
    400InvalidParam.PortRangeThe specified parameter %s is not valid. It should be two integers less than 65535 in ?/? format.The format of the port range is invalid. Specify the port range in the format of a slash separating two integers.
    400InvalidIpProtocol.ValueNotSupportedThe specified parameter IpProtocol should not be null and only tcp, udp, icmp, gre or all is supported. Ignore case.-
    400InvalidPriority.ValueNotSupportedThe parameter Priority is invalid.The specified Priority parameter is invalid.
    400InvalidParam.SourceIpThe Parameters SourceCidrIp and Ipv6SourceCidrIp in %s cannot be set at the same time.The SourceCidrIp and Ipv6SourceCidrIp parameters cannot be specified at the same time.
    400InvalidParam.DestIpThe Parameters DestCidrIp and Ipv6DestCidrIp in %s cannot be set at the same time.The DestCidrIp and Ipv6DestCidrIp parameters cannot be specified at the same time.
    400InvalidParam.Ipv6DestCidrIpThe specified parameter %s is not valid.The specified Ipv6DestCidrIp parameter is invalid.
    400InvalidParam.Ipv6SourceCidrIpThe specified parameter %s is not valid.The specified Ipv6SourceCidrIp parameter is invalid.
    400InvalidParam.Ipv4ProtocolConflictWithIpv6AddressIPv6 address cannot be specified for IPv4-specific protocol.IPv6 addresses cannot be specified for instances that use the IPv4 protocol.
    400InvalidParam.Ipv6ProtocolConflictWithIpv4AddressIPv4 address cannot be specified for IPv6-specific protocol.IPv4 addresses cannot be specified for instances that use the IPv6 protocol.
    400InvalidParameter.Ipv6CidrIpThe specified Ipv6CidrIp is not valid.The specified Ipv6CidrIp parameter is invalid.
    400InvalidSourcePortRange.MalformedThe specified parameter SourcePortRange is not valid.The specified SourcePortRange parameter is invalid.
    400InvalidParam.SourceCidrIpThe specified param SourceCidrIp is not valid.The specified SourceCidrIp parameter is invalid.
    400InvalidParam.DestCidrIpThe specified param DestCidrIp is not valid.The specified DestCidrIp parameter is invalid.
    400InvalidParameter.ConflictIPv6 and IPv4 addresses cannot exist at the same time.IPv6 and IPv4 addresses cannot be both specified.
    400InvalidParam.SecurityGroupRuleIdThe specified parameter SecurityGroupRuleId is not valid.The specified SecurityGroupRuleId parameter is invalid.
    400InvalidOperation.ModifySgRuleEntityTypeThe source or destination type of the rules cannot be modified.The type of the source or destination in the rule cannot be modified.
    400AuthorizationLimitExceedThe limit of authorization records in the security group reaches.The security group has reached the maximum number of rules that can be added to it.
    400InvalidPrefixListId.NotFoundThe specified prefix list was not found.The prefix list does not exist.
    400InvalidParam.ProtocolAndPortRangeMismatchThe specified Protocol and PortRange do not match.The protocol and the port range do not match.
    400InvalidParam.ProtocolAndAddressFamilyMismatchThe specified Protocol and address family do not match.The protocol and the address family do not match.
    400InvalidParam.PrefixListAddressFamilyMismatchThe address family of the prefix list does not match the rule.The address family of the prefix list and the rule do not match.
    400InvalidParam.InvalidModifyRuleRequestThe request parameters are illegal.The request parameter is invalid.
    400InvalidOperation.ModifyNicTypeNicType is not allowed to modify.The NicType parameter cannot be modified.
    400InvalidParamter.ConflictThe specified SourceCidrIp should be different from the DestCidrIp.The value of SourceCidrIp must be different from that of DestCidrIp.
    400InvalidIpProtocol.ValueNotSupportedThe parameter %s must be specified with case insensitive TCP, UDP, ICMP, GRE or All.The specified Protocol parameter is invalid. You must set Protocol to a vaule that is case-insensitive, such as TCP, UDP, ICMP, GRE, and All.
    400InvalidOperation.RuleDuplicate%s.The rule being modified will be duplicated with an existing rule.
    403InvalidDestGroupId.MismatchNicType is required or NicType expects intranet.The NicType parameter is not specified or is not set to intranet.
    403MissingParameterThe input parameter DestGroupId or DestCidrIp cannot be both blank.The DestGroupId and DestCidrIp parameters are required.
    403InvalidParamter.ConflictThe specified SecurityGroupId should be different from the SourceGroupId.The destination security group is the same as the source security group.
    403InvalidNetworkType.ConflictThe specified SecurityGroup network type should be same with SourceGroup network type (vpc or classic).The network type of the destination security group is different from that of the source security group.
    403InvalidSecurityGroup.IsSameThe authorized SecurityGroupId should be different from the DestGroupId.The ID of the source security group is the same as that of the destination security group.
    403InvalidOperation.ResourceManagedByCloudProduct%sYou cannot modify security groups managed by cloud services.
    404InvalidSecurityGroupId.NotFoundThe specified SecurityGroupId does not exist.The specified security group does not exist in this account. Check whether the security group ID is correct.
    404InvalidDestGroupId.NotFoundThe DestGroupId provided does not exist in our records.-
    404SecurityGroupRule.NotFoundThe target security group rule do not exist.The specified security group rule does not exist.
    404InvalidSecurityGroupRuleId.NotFoundThe specified SecurityGroupRuleId is not exists.The specified SecurityGroupRuleId parameter does not exist.
    500InternalErrorThe request processing has failed due to some unknown error.An internal error has occurred. Try again later.

    For a list of error codes, visit the Service error codes.

    Change history

    Change timeSummary of changesOperation
    2024-06-27The Error code has changedView Change Details
    2023-08-23The Error code has changedView Change Details
    2023-04-07The Error code has changedView Change Details
    2022-09-05API Description Update. The Error code has changedView Change Details
    2022-05-07The Error code has changedView Change Details