UpdateLiveAppRecordConfig - - Alibaba Cloud ドキュメントセンター

Updates a recording configuration for an application. The recordings are stored in Object Storage Service (OSS).

Usage notes

Obtain the main streaming domain, and then call this operation to update a recording configuration.

QPS limit

You can call this operation up to 30 times per second per account. Requests that exceed this limit are dropped and you will experience service interruptions. We recommend that you take note of this limit when you call this operation. For more information, see QPS limits.

Debugging

OpenAPI Explorer automatically calculates the signature value. For your convenience, we recommend that you call this operation in OpenAPI Explorer. OpenAPI Explorer dynamically generates the sample code of the operation for different SDKs.

Request parameters

Parameter	Type	Required	Example	Description
Action	String	Yes	UpdateLiveAppRecordConfig	The operation that you want to perform. Set the value to UpdateLiveAppRecordConfig.
DomainName	String	Yes	example.com	The main streaming domain.
AppName	String	Yes	liveApp****	The name of the application to which the live stream belongs.
OssEndpoint	String	Yes	learn.developer.aliyundoc.com	The endpoint of the OSS bucket. To store live stream recordings in OSS, you need to create an OSS bucket in advance. For more information, see Configure OSS.
StreamName	String	No	teststream	The name of the live stream.
StartTime	String	No	2018-04-10T09:57:21Z	The recording start time. Specify the time in the ISO 8601 standard in the yyyy-MM-ddTHH:mm:ssZ format. The time must be in UTC. Note The start time must be within seven days after the stream ingest starts. This parameter takes effect only for the live stream specified by the StreamName parameter. If the StreamName parameter is not specified, this parameter does not take effect.
EndTime	String	No	2018-04-16T09:57:21Z	The recording end time. Specify the time in the ISO 8601 standard in the yyyy-MM-ddTHH:mm:ssZ format. The time must be in UTC. Note The time range that is specified by the EndTime and StartTime parameters must be less than or equal to seven days. If the value exceeds seven days, ApsaraVideo Live considers seven days as the time range. This parameter takes effect only for the live stream specified by the StreamName parameter. If the StreamName parameter is not specified, this parameter does not take effect.
OnDemand	Integer	No	1	Specifies whether to enable on-demand recording. Valid values: 0: disables on-demand recording. 1: enables on-demand recording by using the HTTP callback method. 2: enables on-demand recording by parsing the stream ingest parameters. 7: By default, ApsaraVideo Live does not automatically record live streams. You can call the RealTimeRecordCommand operation to manually start or stop recording. Note If you set the OnDemand parameter to 1, you need to call the AddLiveRecordNotifyConfig operation to configure the OnDemandUrl parameter. Otherwise, ApsaraVideo Live does not perform on-demand recording.
DelayTime	Integer	No	180	The interruption duration threshold. If the stream interruption duration exceeds the threshold, a new recording is generated. The value of this parameter ranges from 15 to 21600 seconds.
RecordFormat.N.CycleDuration	Integer	No	1	The recording cycle. Unit: seconds. If you do not specify this parameter, the default value 6 hours is used. Note If a live stream is interrupted during a recording cycle but is resumed within the interruption duration threshold, the stream is recorded in the same recording before and after the interruption. If a live stream is interrupted for longer than the interruption duration threshold, a new recording is generated.
RecordFormat.N.Format	String	No	m3u8	The recording format. Supported formats include M3U8, Flash Video (FLV), MP4, and Common Media Application Format (CMAF). Valid values: Important You need to specify at lease one of the RecordFormat and TranscodeRecordFormat parameters. If you set this parameter to m3u8 or cmaf, you must also specify the RecordFormat.N.SliceOssObjectPrefix and RecordFormat.N.SliceDuration parameters. m3u8 flv mp4 cmaf
RecordFormat.N.SliceDuration	Integer	No	30	The duration of a single segment. Unit: seconds. Important This parameter takes effect only if you set the RecordFormat.N.Format parameter to m3u8 or cmaf. If you do not specify this parameter, the default value 30 seconds is used. Valid values: 5 to 30.
TranscodeRecordFormat.N.CycleDuration	Integer	No	21600	The transcoded stream recording cycle. Unit: seconds. If you do not specify this parameter, the default value 6 hours is used.
TranscodeRecordFormat.N.Format	String	No	m3u8	The transcoded stream recording format. Supported formats include M3U8, FLV, MP4, and CMAF. Valid values: Important If you set this parameter to m3u8 or cmaf, you must also specify the TranscodeRecordFormat.N.SliceOssObjectPrefix and TranscodeRecordFormat.N.SliceDuration parameters. m3u8 flv mp4 cmaf
TranscodeRecordFormat.N.SliceDuration	Integer	No	30	The duration of a single segment in a transcoded stream recording. Unit: seconds. Important This parameter takes effect only if you set the TranscodeRecordFormat.N.Format parameter to m3u8 or cmaf. If you do not specify this parameter, the default value 30 seconds is used. Valid values: 5 to 30.
TranscodeTemplates.N	String	No	sd	The transcoding template of the transcoded stream. You can configure up to 10 transcoding templates at a time. If you specify the TranscodeRecordFormat.N.xxx parameters, configure at least one transcoding template. If you want to record multiple or all transcoded streams, set TranscodeTemplates.1 to . Note* You cannot set the TranscodeTemplates parameter to `raw`, which is a reserved identifier. RepeatList is expressed as N in TranscodeTemplates.N, which means multiple templates are configured. Examples: TranscodeTemplates.1=sd and TranscodeTemplates.2=hd.

Response parameters

Parameter	Type	Example	Description
RequestId	String	16A96B9A-F203-4EC5-8E43-CB92E68F4CD8	The request ID.

Examples

Sample requests

Sample success responses

JSON format

HTTP/1.1 200 OK

Error codes

HTTP status code	Error code	Error message	Description
400	InvalidOssBucket.Malformed	Specified parameter OssBucket is not valid.	The OSS bucket is malformed. Check whether the value of the OssBucket parameter is valid.
400	InvalidOssBucket.NotFound	The parameter OssBucket does not exist.	The OSS bucket is not found. Check whether the value of the OssBucket parameter is valid.
400	InvalidFormat.Malformed	Specified parameter Format is not valid.	The recording format is invalid. Check whether the value of the Format parameter is valid.
400	InvalidCycleDuration.Malformed	Specified CycleDuration Format is not valid.	The format of the recording cycle is invalid. Check whether the value of the CycleDuration parameter is valid.
400	MissingOssObjectPrefix	OssObjectPrefix is mandatory for this action.	The naming format of a recording is not specified. Check whether the value of the OssObjectPrefix parameter is valid.
400	InvalidOssObjectPrefix.Malformed	Specified parameter OssObjectPrefix is not valid.	The specified naming format of a recording is invalid. Check whether the value of the OssObjectPrefix parameter is valid.
400	InvalidSliceOssObjectPrefix.Malformed	Specified parameter SliceOssObjectPrefix is not valid.	The specified naming format of a segment is invalid. Check whether the value of the SliceOssObjectPrefix parameter is valid.
400	ConfigAlreadyExists	Config has already exist.	The configuration already exists.
400	InvalidStartTime.Malformed	Specified StartTime is malformed.	The format of the start time is invalid. Check whether the value of the StartTime parameter is valid.
400	InvalidEndTime.Malformed	Specified EndTime is malformed.	The format of the end time is invalid. Check whether the value of the EndTime parameter is valid.

For a list of error codes, see Service error codes.