ModifyVpnConnectionAttribute - Virtual Private Cloud - Alibaba Cloud Documentation Center

Modifies the configuration of an IPsec-VPN connection.

Operation description

If you want to modify a IPsec-VPN connection in dual-tunnel mode, call the ModifyVpnConnectionAttribute operation. You can modify the required parameters and the following request parameters:

ClientToken, Name, LocalSubnet, RemoteSubnet, EffectImmediately, AutoConfigRoute, TunnelOptionsSpecification, and EnableTunnelsBgp.
If you want to modify a IPsec-VPN connection in single-tunnel mode, call the ModifyVpnConnectionAttribute operation. You can modify the required parameters and the following request parameters:

ClientToken, Name, LocalSubnet, RemoteSubnet, EffectImmediately, IkeConfig, IpsecConfig, HealthCheckConfig, AutoConfigRoute, EnableDpd, EnableNatTraversal, BgpConfig, and RemoteCaCertificate.
ModifyVpnConnectionAttribute is an asynchronous operation. After a request is sent, the system returns a request ID and modifies the configuration of the IPsec-VPN connection in the backend. You can call the DescribeVpnGateway operation to query the status of a VPN gateway.
- If the VPN gateway is in the updating state, the configuration of the IPsec-VPN connection is being modified.
- If the VPN gateway is in the active state, the configuration of the IPsec-VPN connection is modified.
You cannot repeatedly call the ModifyVpnConnectionAttribute operation for the same VPN gateway within the specified period of time.

Debugging

OpenAPI Explorer automatically calculates the signature value. For your convenience, we recommend that you call this operation in OpenAPI Explorer.

Debug

Authorization information

The following table shows the authorization information corresponding to the API. The authorization information can be used in the Action policy element to grant a RAM user or RAM role the permissions to call this API operation. Description:

Operation: the value that you can use in the Action element to specify the operation on a resource.
Access level: the access level of each operation. The levels are read, write, and list.
Resource type: the type of the resource on which you can authorize the RAM user or the RAM role to perform the operation. Take note of the following items:
- The required resource types are displayed in bold characters.
- If the permissions cannot be granted at the resource level, All Resources is used in the Resource type column of the operation.
Condition Key: the condition key that is defined by the cloud service.
Associated operation: other operations that the RAM user or the RAM role must have permissions to perform to complete the operation. To complete the operation, the RAM user or the RAM role must have the permissions to perform the associated operations.

Operation	Access level	Resource type	Condition key	Associated operation
vpc:ModifyVpnConnectionAttribute	update	VpnConnection acs:vpc:{#regionId}:{#accountId}:vpnconnection/{#VpnConnectionId}	none	none

Request parameters

Parameter	Type	Required	Description	Example
RegionId	string	Yes	The ID of the region in which the IPsec-VPN connection is created. You can call the DescribeRegions operation to query the most recent region list.	cn-shanghai
ClientToken	string	No	The client token that is used to ensure the idempotence of the request. You can use the client to generate the token, but you must make sure that the token is unique among different requests. The token can contain only ASCII characters. Note If you do not specify this parameter, the system automatically uses the value of RequestId as the value of ClientToken. The request ID may be different for each request.	02fb3da4-130e-11e9-8e44-0016e04115b
VpnConnectionId	string	Yes	The ID of the IPsec-VPN connection.	vco-bp1bbi27hojx80nck****
Name	string	No	The name of the IPsec-VPN connection. The name must be 1 to 100 characters in length and cannot start with `http://` or `https://`.	nametest
LocalSubnet	string	No	The CIDR block used to connect the virtual private cloud (VPC) to the data center. The CIDR block is used in Phase 2 negotiations. Separate multiple CIDR blocks with commas (,). Example: 192.168.1.0/24,192.168.2.0/24. The following routing modes are supported: If you set LocalSubnet and RemoteSubnet to 0.0.0.0/0, the routing mode of the IPsec-VPN connection is set to Destination Routing Mode. If you set LocalSubnet and RemoteSubnet to specific CIDR blocks, the routing mode of the IPsec-VPN connection is set to Protected Data Flows.	10.1.1.0/24,10.1.2.0/24
RemoteSubnet	string	No	The CIDR block on the data center side. This CIDR block is used in Phase 2 negotiations. Separate multiple CIDR blocks with commas (,). Example: 192.168.3.0/24,192.168.4.0/24. The following routing modes are supported: If you set LocalSubnet and RemoteSubnet to 0.0.0.0/0, the routing mode of the IPsec-VPN connection is set to Destination Routing Mode. If you set LocalSubnet and RemoteSubnet to specific CIDR blocks, the routing mode of the IPsec-VPN connection is set to Protected Data Flows.	10.2.1.0/24,10.2.2.0/24
EffectImmediately	boolean	No	Specifies whether to immediately start IPsec negotiations after the configuration takes effect. Valid values: true: immediately starts IPsec negotiations after the configuration takes effect. false: IPsec negotiations start when inbound traffic is detected.	false
IkeConfig	string	No	This parameter is supported by single-tunnel IPsec-VPN connections. The configurations of Phase 1 negotiations: IkeConfig.Psk: the pre-shared key that is used for authentication between the VPN gateway and the data center. It must be 1 to 100 characters in length, and can contain letters, digits, and the following characters: ~!`@#$%^&()_-+={}[]\|;:',.<>/? If you do not specify a pre-shared key, the system generates a random 16-character string as the pre-shared key. You can call the DescribeVpnConnection operation to query the pre-shared key that is generated by the system. Note* The pre-shared key of the IPsec-VPN connection must be the same as the authentication key of the on-premises database. Otherwise, the on-premises database and the VPN gateway cannot establish a connection. IkeConfig.IkeVersion: the version of the Internet Key Exchange (IKE) protocol. Valid values: ikev1 and ikev2. Compared with IKEv1, IKEv2 simplifies the security association (SA) negotiation process and is more suitable for scenarios in which multiple CIDR blocks are used. IkeConfig.IkeMode: the negotiation mode of IKE. Valid values: main and aggressive. main: This mode offers higher security during negotiations. aggressive: This mode is faster and has a higher success rate. IkeConfig.IkeEncAlg: the encryption algorithm that is used in Phase 1 negotiations. Valid values: aes, aes192, aes256, des, and 3des. IkeConfig.IkeAuthAlg: the authentication algorithm that is used in Phase 1 negotiations. Valid values: md5, sha1, sha256, sha384, and sha512. IkeConfig.IkePfs: the Diffie-Hellman (DH) key exchange algorithm that is used in Phase 1 negotiations. Valid values: group1, group2, group5, and group14. IkeConfig.IkeLifetime: the security association (SA) lifetime that is determined by Phase 1 negotiations. Unit: seconds. Valid values: 0 to 86400. IkeConfig.LocalId: the identifier of the VPN gateway. The identifier cannot exceed 100 characters in length. The default value is the IP address of the VPN gateway. IkeConfig.RemoteId: the identifier of the customer gateway. The identifier cannot exceed 100 characters in length. The default value is the IP address of the customer gateway.	{"Psk":"pgw6dy7d1i8i****","IkeVersion":"ikev1","IkeMode":"main","IkeEncAlg":"aes","IkeAuthAlg":"sha1","IkePfs":"group2","IkeLifetime":86400,"LocalId":"116.64.XX.XX","RemoteId":"139.18.XX.XX"}
IpsecConfig	string	No	You can specify this parameter if you modify the configuration of a single-tunnel IPsec-VPN connection. The configuration of Phase 2 negotiations: IpsecConfig.IpsecEncAlg: the encryption algorithm that is used in Phase 2 negotiations. Valid values: aes, aes192, aes256, des, and 3des. IpsecConfig. IpsecAuthAlg: the authentication algorithm that is used in Phase 2 negotiations. Valid values: md5, sha1, sha256, sha384, and sha512. IpsecConfig. IpsecPfs: the DH key exchange algorithm that is used in Phase 1 negotiations. If you specify this parameter, packets of all protocols are forwarded. Valid values: disabled, group1, group2, group5, and group14. IpsecConfig. IpsecLifetime: the SA lifetime that is determined by Phase 2 negotiations. Unit: seconds. Valid values: 0 to 86400.	{"IpsecEncAlg":"aes","IpsecAuthAlg":"sha1","IpsecPfs":"group2","IpsecLifetime":86400}
HealthCheckConfig	string	No	You can specify this parameter if you modify the configuration of a single-tunnel IPsec-VPN connection. The health check configuration: HealthCheckConfig.enable: specifies whether to enable health checks. Valid values: true and false. HealthCheckConfig.dip: the destination IP address that is used for health checks. HealthCheckConfig.sip: the source IP address that is used for health checks. HealthCheckConfig.interval: the interval between two consecutive health checks. Unit: seconds. HealthCheckConfig.retry: the maximum number of health check retries.	{"enable":"true","dip":"192.168.1.1","sip":"10.1.1.1","interval":"3","retry":"3"}
AutoConfigRoute	boolean	No	Specifies whether to automatically advertise routes. Valid values: true false	true
EnableDpd	boolean	No	You can specify this parameter if you modify the configuration of a single-tunnel IPsec-VPN connection. Specifies whether to enable the dead peer detection (DPD) feature. Valid values: true:: enables the DPD feature. The initiator of the IPsec-VPN connection sends DPD packets to check the existence and availability of the peer. If no feedback is received from the peer within a specific period of time, the connection fails. Then, the ISAKMP SA, IPsec SA, and IPsec tunnel are deleted. false: disables the DPD feature. The initiator of the IPsec-VPN connection does not send DPD packets.	true
EnableNatTraversal	boolean	No	You can specify this parameter if you modify the configuration of a single-tunnel IPsec-VPN connection. Specifies whether to enable NAT traversal. Valid values: true After NAT traversal is enabled, the initiator does not check the UDP ports during IKE negotiations and can automatically discover NAT gateway devices along the IPsec tunnel. false	true
BgpConfig	string	No	This parameter is supported by single-tunnel IPsec-VPN connections. The Border Gateway Protocol (BGP) configurations: BgpConfig.EnableBgp: specifies whether to enable BGP. Valid values: true and false. BgpConfig.LocalAsn: the autonomous system number (ASN) on the Alibaba Cloud side. Valid values: 1 to 4294967295. You can enter the ASN in two segments. Separate the first 16 bits of the ASN from the remaining 16 bits with a period (.). Enter the number in each segment in decimal format. For example, if you enter 123.456, the ASN is: 123 × 65536 + 456 = 8061384. BgpConfig.TunnelCidr: the CIDR block of the IPsec tunnel. The CIDR block must belong to 169.254.0.0/16. The subnet mask of the CIDR block must be 30 bits in length. Note The CIDR block of the IPsec tunnel of each IPsec-VPN connection must be unique on a VPN gateway. LocalBgpIp: the BGP IP address on the Alibaba Cloud side. This IP address must fall within the CIDR block range of the IPsec tunnel. Note This parameter is required when the VPN gateway has dynamic BGP enabled. Before you configure BGP, we recommend that you learn about how BGP works and its limits. For more information, see BGP dynamic routing . We recommend that you use a private ASN to establish a connection with Alibaba Cloud over BGP. For information about the range of private ASNs, see the relevant documentation.	{"EnableBgp":"true","LocalAsn":"65530","TunnelCidr":"169.254.11.0/30","LocalBgpIp":"169.254.11.1"}
RemoteCaCertificate	string	No	You can specify this parameter if you modify the configuration of a single-tunnel IPsec-VPN connection. If the VPN gateway uses a ShangMi (SM) certificate, you can modify the CA certificate used by the IPsec peer. If the VPN gateway does not use an SM certificate, you cannot specify this parameter.	-----BEGIN CERTIFICATE----- MIIB7zCCAZW**** -----END CERTIFICATE-----
TunnelOptionsSpecification	array<object>	No	The tunnel configurations. You can specify the parameters in TunnelOptionsSpecification if you modify the configuration of a dual-tunnel IPsec-VPN connection. You can modify both the active and standby tunnels of the IPsec-VPN connection.
	object	No	The tunnel configurations.
TunnelId	string	No	TunnelOptionsSpecification parameters are supported by dual-tunnel IPsec-VPN gateways. You can modify both the active and standby tunnels of the IPsec-VPN connection. The tunnel ID.	tun-opsqc4d97wni27****
Role	string	No	The tunnel role. Valid values: master: The tunnel is an active tunnel. slave: The tunnel is a standby tunnel.	master
EnableDpd	boolean	No	Specifies whether to enable the Dead Peer Detection (DPD) feature for the tunnel. Valid values: true The initiator of the IPsec-VPN connection sends DPD packets to check the existence and availability of the peer. If no feedback is received from the peer within a specified period of time, the connection fails. ISAKMP SA and IPsec SA are deleted. The security tunnel is also deleted. false	true
EnableNatTraversal	boolean	No	Specifies whether to enable NAT traversal for the tunnel. Valid values: true After NAT traversal is enabled, the initiator does not check the UDP ports during Internet Key Exchange (IKE) negotiations and can automatically discover NAT gateway devices along the IPsec-VPN tunnel. false	true
RemoteCaCertificate	string	No	If the VPN gateway uses an SM certificate, you can modify the CA certificate used by the IPsec peer. If the VPN gateway does not use an SM certificate, this parameter is not supported.	-----BEGIN CERTIFICATE----- MIIB7zCCAZW**** -----END CERTIFICATE-----
TunnelBgpConfig	object	No	The Border Gateway Protocol (BGP) configurations of the tunnel.
LocalAsn	long	No	The ASN of the tunnel on the Alibaba Cloud side. Valid values: 1 to 4294967295. Default value: 45104. Note You can specify or modify this parameter if BGP is enabled for the IPsec-VPN connection (EnableTunnelsBgp is set to true). Before you configure BGP, we recommend that you learn about how BGP works and its limits. For more information, see VPN Gateway supports BGP dynamic routing. We recommend that you use a private ASN to establish a connection with Alibaba Cloud over BGP. For information about the range of private ASNs, see the relevant documentation.	65530
LocalBgpIp	string	No	The BGP IP address of the tunnel on the Alibaba Cloud side. The address is an IP address that falls within the BGP CIDR block range.	169.254.10.1
TunnelCidr	string	No	The BGP CIDR block of the tunnel. The CIDR block must belong to 169.254.0.0/16. The subnet mask of the CIDR block must be 30 bits in length. Note The BGP CIDR block of a tunnel associated with a VPN gateway must be unique.	169.254.10.0/30
TunnelIkeConfig	object	No	The configurations of Phase 1 negotiations.
IkeAuthAlg	string	No	The authentication algorithm that is used in Phase 1 negotiations. Valid values: md5, sha1, sha256, sha384, and sha512.	md5
IkeEncAlg	string	No	The encryption algorithm that is used in Phase 1 negotiations. Valid values: aes, aes192, aes256, des, and 3des.	aes
IkeLifetime	long	No	The SA lifetime that is determined by Phase 1 negotiations. Unit: seconds. Valid values: 0 to 86400.	86400
IkeMode	string	No	The IKE negotiation mode. Valid values: main: This mode offers higher security during negotiations. aggressive: This mode is faster and has a higher success rate.	main
IkePfs	string	No	The DH key exchange algorithm that is used in Phase 1 negotiations. Valid values: group1, group2, group5, and group14.	group2
IkeVersion	string	No	The version of the IKE protocol. Valid values: ikev1 and ikev2. Compared with IKEv1, IKEv2 simplifies the security association (SA) negotiation process and is more suitable for scenarios in which multiple CIDR blocks are used.	ikev1
LocalId	string	No	The identifier on the Alibaba Cloud side, which is used in Phase 1 negotiations. The identifier cannot exceed 100 characters in length. The default identifier is the IP address of the tunnel. You can set LocalId to a fully qualified domain name (FQDN). In this case, we recommend that you set IkeMode to aggressive.	47.21.XX.XX
Psk	string	No	The pre-shared key, which is used for identity authentication between the tunnel and the tunnel peer. The key must be 1 to 100 characters in length and can contain digits, letters, and the following characters: ~!\`@#$%^&()_-+={}[]\|;:',.<>/? If you do not specify a pre-shared key, the system generates a random 16-character string as the pre-shared key. You can call the DescribeVpnConnection operation to query the pre-shared key that is generated by the system. Note* The tunnel and the tunnel peer must use the same pre-shared key. Otherwise, the tunnel cannot be established.	123456****
RemoteId	string	No	The identifier of the tunnel peer, which is used in Phase 1 negotiations. The identifier cannot exceed 100 characters in length. The default identifier is the IP address of the customer gateway associated with the tunnel. You can set RemoteId to an FQDN. In this case, we recommend that you set IkeMode to aggressive.	47.42.XX.XX
TunnelIpsecConfig	object	No	The configurations of Phase 2 negotiations.
IpsecAuthAlg	string	No	The authentication algorithm that is used in Phase 2 negotiations. Valid values: md5, sha1, sha256, sha384, and sha512.	md5
IpsecEncAlg	string	No	The encryption algorithm that is used in Phase 2 negotiations. Valid values: aes, aes192, aes256, des, and 3des.	aes
IpsecLifetime	integer	No	The SA lifetime that is determined by Phase 2 negotiations. Unit: seconds. Valid values: 0 to 86400.	86400
IpsecPfs	string	No	The DH key exchange algorithm that is used in Phase 2 negotiations. Valid values: disabled, group1, group2, group5, and group14.	group2
EnableTunnelsBgp	boolean	No	You can specify this parameter if you modify the configuration of a dual-tunnel IPsec-VPN connection. Specifies whether to enable BGP for the tunnel. Valid values: true and false.	true

Response parameters

Parameter	Type	Description	Example
	object	The returned data.
EnableNatTraversal	boolean	Indicates whether NAT traversal is enabled for the IPsec-VPN connection. Valid values: Valid values: false true This parameter is returned only for single-tunnel IPsec-VPN connections.	true
CreateTime	long	The timestamp generated when the IPsec-VPN connection was established. Unit: milliseconds. This value is a UNIX timestamp representing the number of milliseconds that have elapsed since the epoch time January 1, 1970, 00:00:00 UTC.	1492753817000
EffectImmediately	boolean	Indicates whether IPsec negotiations immediately start after the configuration takes effect. Valid values: true: IPsec negotiations immediately start after the configuration takes effect. false: IPsec negotiations start when inbound traffic is detected.	false
VpnGatewayId	string	The ID of the VPN gateway.	vpn-bp1q8bgx4xnkm2ogj****
LocalSubnet	string	The CIDR block on the VPC side.	10.1.1.0/24,10.1.2.0/24
RequestId	string	The request ID.	7DB79D0C-5F27-4AB5-995B-79BE55102F90
VpnConnectionId	string	The ID of the IPsec-VPN connection.	vco-bp1bbi27hojx80nck****
Description	string	The description of the IPsec-VPN connection.	description
RemoteSubnet	string	The CIDR block on the data center side.	10.2.1.0/24,10.2.2.0/24
CustomerGatewayId	string	The ID of the customer gateway associated with the IPsec-VPN connection. This parameter is returned only for single-tunnel IPsec-VPN connections.	cgw-p0w2jemrcj5u61un8****
Name	string	The name of the IPsec-VPN connection.	nametest
EnableDpd	boolean	Indicates whether the DPD feature is enabled for the IPsec-VPN connection. Valid values: false true This parameter is returned only for single-tunnel IPsec-VPN connections.	true
IkeConfig	object	The configuration of Phase 1 negotiations. IkeConfig parameters are returned only for single-tunnel IPsec-VPN connections.
RemoteId	string	The identifier on the data center side. The default value is the IP address of the customer gateway. The value can be a FQDN or an IP address.	139.18.XX.XX
IkeLifetime	long	The lifetime in the IKE phase. Unit: seconds.	86400
IkeEncAlg	string	The encryption algorithm in the IKE phase.	aes
LocalId	string	The identifier on the VPC side. The default value is the IP address of the VPN gateway. The value can be an FQDN or an IP address.	116.64.XX.XX
IkeMode	string	The IKE negotiation mode. main: This mode offers higher security during negotiations. aggressive: This mode is faster and has a higher success rate.	main
IkeVersion	string	The version of the IKE protocol. ikev1 ikev2 Compared with IKEv1, IKEv2 simplifies the SA negotiation process and is more suitable for scenarios in which multiple CIDR blocks are used.	ikev1
IkePfs	string	The DH group in the IKE phase.	group2
Psk	string	The pre-shared key.	pgw6dy7d1i8i****
IkeAuthAlg	string	The authentication algorithm in the IKE phase.	sha1
IpsecConfig	object	The configuration of Phase 2 negotiations. IpsecConfig parameters are returned only for single-tunnel IPsec-VPN connections.
IpsecAuthAlg	string	The authentication algorithm in the IPsec phase.	sha1
IpsecLifetime	long	The lifetime in the IPsec phase. Unit: seconds.	86400
IpsecEncAlg	string	The encryption algorithm in the IPsec phase.	aes
IpsecPfs	string	The DH group in the IPsec phase.	group2
VcoHealthCheck	object	The health check configuration. VcoHealthCheck parameters are returned only for single-tunnel IPsec-VPN connections.
Dip	string	The destination IP address.	192.168.1.1
Interval	integer	The interval between two consecutive health checks. Unit: seconds.	3
Retry	integer	The maximum number of health check retries.	3
Sip	string	The source IP address that is used for health checks.	10.1.1.1
Enable	string	Indicates whether the health check feature is enabled for the IPsec-VPN connection. true false	true
VpnBgpConfig	object	The BGP configuration. VpnBgpConfig parameters are returned only for single-tunnel IPsec-VPN connections.
Status	string	The negotiation state of BGP. Valid values: success: normal false: abnormal	success
PeerBgpIp	string	The BGP IP address of the data center.	169.254.11.2
TunnelCidr	string	The BGP CIDR block of the IPsec-VPN connection.	169.254.11.0/30
EnableBgp	string	Indicates whether BGP is enabled. Valid values: true false	true
LocalBgpIp	string	The BGP IP address on the Alibaba Cloud side.	169.254.11.1
PeerAsn	integer	The ASN on the data center side.	65531
LocalAsn	integer	The ASN on the Alibaba Cloud side.	65530
TunnelOptionsSpecification	array<object>	The tunnel configuration of the IPsec-VPN connection. TunnelOptionsSpecification parameters are returned only for dual-tunnel IPsec-VPN connections.
	object	The tunnel configurations of the IPsec-VPN connection.
CustomerGatewayId	string	The ID of the customer gateway associated with the tunnel.	cgw-p0wy363lucf1uyae8****
EnableDpd	boolean	Indicates whether the DPD feature is enabled for the tunnel. Valid values: false true	true
EnableNatTraversal	boolean	Indicates whether NAT traversal is enabled for the tunnel. Valid values: false true	true
InternetIp	string	The IP address on the Alibaba Cloud side.	47.21.XX.XX
RemoteCaCertificate	string	The CA certificate of the tunnel peer. This parameter is returned only if the VPN gateway is of the SM type.	-----BEGIN CERTIFICATE----- MIIB7zCCAZW**** -----END CERTIFICATE-----
Role	string	The tunnel role. Valid values: master: The tunnel is an active tunnel. slave: The tunnel is a standby tunnel.	master
State	string	The tunnel status. Valid values: active updating deleting	active
TunnelBgpConfig	object	The BGP configuration.
LocalAsn	long	The ASN of the tunnel on the Alibaba Cloud side.	65530
LocalBgpIp	string	The BGP IP address of the tunnel on the Alibaba Cloud side.	169.254.10.1
PeerAsn	long	The ASN of the tunnel peer.	65531
PeerBgpIp	string	The BGP IP address of the tunnel peer.	169.254.10.2
TunnelCidr	string	The BGP CIDR block of the tunnel.	169.254.10.0/30
TunnelId	string	The tunnel ID.	tun-opsqc4d97wni27****
TunnelIkeConfig	object	The configuration of Phase 1 negotiations.
IkeAuthAlg	string	The authentication algorithm in the IKE phase.	sha1
IkeEncAlg	string	The encryption algorithm in the IKE phase.	aes
IkeLifetime	long	The lifetime in the IKE phase. Unit: seconds.	86400
IkeMode	string	The IKE negotiation mode. main: This mode offers higher security during negotiations. aggressive: This mode is faster and has a higher success rate.	main
IkePfs	string	The DH group in the IKE phase.	group2
IkeVersion	string	The version of the IKE protocol.	ikev1
LocalId	string	The identifier of the tunnel on the Alibaba Cloud side.	47.21.XX.XX
Psk	string	The pre-shared key.	123456****
RemoteId	string	The identifier of the tunnel peer.	47.42.XX.XX
TunnelIpsecConfig	object	The configuration of Phase 2 negotiations.
IpsecAuthAlg	string	The authentication algorithm in the IPsec phase.	sha1
IpsecEncAlg	string	The encryption algorithm in the IPsec phase.	aes
IpsecLifetime	long	The lifetime in the IPsec phase. Unit: seconds.	86400
IpsecPfs	string	The DH group in the IPsec phase.	group2
ZoneNo	string	The zone of the tunnel.	ap-southeast-5a
EnableTunnelsBgp	boolean	Indicates whether BGP is enabled for the tunnel. Valid values: true false This parameter is returned only by dual-tunnel IPsec-VPN connections.	true
ResourceGroupId	string	The ID of the resource group to which the IPsec-VPN connection belongs. The IPsec-VPN connection and the VPN gateway associated with the IPsec-VPN connection belong to the same resource group. You can call the ListResourceGroups operation to query resource groups.	rg-acfmzs372yg****

Examples

Sample success responses

JSONformat

{
  "EnableNatTraversal": true,
  "CreateTime": 1492753817000,
  "EffectImmediately": false,
  "VpnGatewayId": "vpn-bp1q8bgx4xnkm2ogj****",
  "LocalSubnet": "10.1.1.0/24,10.1.2.0/24",
  "RequestId": "7DB79D0C-5F27-4AB5-995B-79BE55102F90",
  "VpnConnectionId": "vco-bp1bbi27hojx80nck****",
  "Description": "description",
  "RemoteSubnet": "10.2.1.0/24,10.2.2.0/24",
  "CustomerGatewayId": "cgw-p0w2jemrcj5u61un8****",
  "Name": "nametest",
  "EnableDpd": true,
  "IkeConfig": {
    "RemoteId": "139.18.XX.XX",
    "IkeLifetime": 86400,
    "IkeEncAlg": "aes",
    "LocalId": "116.64.XX.XX",
    "IkeMode": "main",
    "IkeVersion": "ikev1",
    "IkePfs": "group2",
    "Psk": "pgw6dy7d1i8i****",
    "IkeAuthAlg": "sha1"
  },
  "IpsecConfig": {
    "IpsecAuthAlg": "sha1",
    "IpsecLifetime": 86400,
    "IpsecEncAlg": "aes",
    "IpsecPfs": "group2"
  },
  "VcoHealthCheck": {
    "Dip": "192.168.1.1",
    "Interval": 3,
    "Retry": 3,
    "Sip": "10.1.1.1",
    "Enable": "true"
  },
  "VpnBgpConfig": {
    "Status": "success",
    "PeerBgpIp": "169.254.11.2",
    "TunnelCidr": "169.254.11.0/30",
    "EnableBgp": "true",
    "LocalBgpIp": "169.254.11.1",
    "PeerAsn": 65531,
    "LocalAsn": 65530
  },
  "TunnelOptionsSpecification": {
    "TunnelOptions": [
      {
        "CustomerGatewayId": "cgw-p0wy363lucf1uyae8****",
        "EnableDpd": true,
        "EnableNatTraversal": true,
        "InternetIp": "47.21.XX.XX",
        "RemoteCaCertificate": "-----BEGIN CERTIFICATE----- MIIB7zCCAZW**** -----END CERTIFICATE-----",
        "Role": "master",
        "State": "active",
        "TunnelBgpConfig": {
          "LocalAsn": 65530,
          "LocalBgpIp": "169.254.10.1",
          "PeerAsn": 65531,
          "PeerBgpIp": "169.254.10.2",
          "TunnelCidr": "169.254.10.0/30"
        },
        "TunnelId": "tun-opsqc4d97wni27****",
        "TunnelIkeConfig": {
          "IkeAuthAlg": "sha1",
          "IkeEncAlg": "aes",
          "IkeLifetime": 86400,
          "IkeMode": "main",
          "IkePfs": "group2",
          "IkeVersion": "ikev1",
          "LocalId": "47.21.XX.XX",
          "Psk": "123456****",
          "RemoteId": "47.42.XX.XX"
        },
        "TunnelIpsecConfig": {
          "IpsecAuthAlg": "sha1",
          "IpsecEncAlg": "aes",
          "IpsecLifetime": 86400,
          "IpsecPfs": "group2"
        },
        "ZoneNo": "ap-southeast-5a"
      }
    ]
  },
  "EnableTunnelsBgp": true,
  "ResourceGroupId": "rg-acfmzs372yg****"
}

Error codes

HTTP status code	Error code	Error message	Description
400	VpnGateway.Configuring	The specified service is configuring.	The service is being configured. Try again later.
400	VpnGateway.FinancialLocked	The specified service is financial locked.	The service is suspended due to overdue payments. Top up your account first.
400	InvalidName	The name is not valid	The name format is invalid.
400	VpnRouteEntry.AlreadyExists	The specified route entry is already exist.	The route already exists.
400	VpnRouteEntry.Conflict	The specified route entry has conflict.	Route conflicts exist.
400	NotSupportVpnConnectionParameter.IpsecPfs	The specified vpn connection ipsec Ipsec Pfs is not support.	The PFS parameter set for the IPsec-VPN connection is not supported.
400	NotSupportVpnConnectionParameter.IpsecAuthAlg	The specified vpn connection ipsec Auth Alg is not support.	The authentication algorithm specified for the IPsec-VPN connection is not supported.
400	VpnRouteEntry.ConflictSSL	The specified route entry has conflict with SSL client.	The route conflicts with the SSL client.
400	VpnRouteEntry.BackupRoute	Validate backup route entry failed.	Active/standby routes failed authentication.
400	VpnRouteEntry.InvalidWeight	Invalid route entry weight value.	The weight specified for the route is invalid.
400	QuotaExceeded.PBR	The policy-based routes has reached the upper limit.	The number of policy-based routes has reached the upper limit.
400	OperationUnsupported.SetDPD	Current version of the VPN does not support setting DPD.	The VPN gateway version does not support DPD.
400	OperationUnsupported.SetNatTraversal	Current version of the VPN does not support setting NAT traversal.	The VPN gateway version does not support NAT traversal.
400	QuotaExceeded.PolicyBasedRoute	The maximum number of policy-based routes is exceeded. Existing routes: %s. Routes to be created: %s. Maximum routes: %s.	The quota of policy-based routes is reached. Existing routes: %s. Routes to be created: %s. Quota: %s.
400	MissingParameter.TunnelCidr	The parameter TunnelCidr is mandatory when BGP is enabled.	You must specify the tunnel CIDR block when you enable BGP.
400	OperationUnsupported.EnableBgp	Current version of the VPN does not support enable BGP.	The current version of the VPN gateway does not support BGP.
400	MissingParam.CustomerGatewayAsn	Asn of customer gateway is mandatory when BGP is enabled.	The ASN of the customer gateway cannot be empty when you enable BGP.
400	IllegalParam.LocalAsn	The specified LocalAsn is invalid.	The local ASN is invalid.
400	IllegalParam.BgpConfig	The specified BgpConfig is invalid.	The BGP configuration is invalid.
400	IllegalParam.EnableBgp	VPN connection must enable BGP when VPN gateway has enabled BGP.	The error message returned because the VPN connection must use BGP if BGP is enabled for the VPN gateway.
400	IllegalParam.TunnelCidr	The specified TunnelCidr is invalid.	The TunnelCidr parameter is set to an invalid value.
400	InvalidLocalBgpIp.Malformed	The specified LocalBgpIp is malformed.	The local BGP IP address is in an abnormal state.
400	IllegalParam.LocalBgpIp	The specified LocalBgpIp is invalid.	The local BGP IP address is invalid.
400	IllegalParam.LocalSubnet	The specified "LocalSubnet" (%s) is invalid.	The specified "LocalSubnet" (%s) is invalid.
400	IllegalParam.RemoteSubnet	The specified "RemoteSubnet" (%s) is invalid.	The specified "RemoteSubnet" (%s) is invalid.
400	OperationFailed.CenLevelNotSupport	When the VPC to which the VPN gateway belongs is attached to a FULL-mode CEN, the VPN gateway cannot enable BGP.	When the VPC to which the VPN gateway belongs is attached to a FULL-mode CEN, the VPN gateway cannot enable BGP.
400	InvalidTunnelCidr.Malformed	The specified TunnelCidr is malformed.	The specified tunnel CIDR block is invalid.
400	CustomerGateway.ConflictRouteEntry	The specified customer gateway has conflict with route entry.	The customer gateway conflicts with the current routes.
400	VpnTask.CONFLICT	Vpn task has conflict.	The VPN operation conflicts. Try again later.
400	OperationFailed.RouteConflictWithIPsecServer	Operation failed because the route to create conflicts with the client IP pool of the IPsec server.	Operation failed because the route to create conflicts with the client IP pool of the IPsec server.
400	IllegalParam.TunnelId	The specified TunnelId is invalid.	TunnelId is set to an invalid value.
400	IllegalParam.Role	The specified Role is invalid.	Role is set to an invalid value.
400	VpnConnectionParamInvalid.SameVpnAndCgwDifferentIkeConfigs	IPSec connections associated with the same user gateway and VPN gateway should have the same pre-shared key and IKE configuration.	The pre-shared key and IKE parameters must be the same for IPsec-VPN connections that are associated with the same VPN gateway and customer gateway.
400	VpnConnectionParamInvalid.SameVpnAndCgwTrafficSelectorOverlap	Traffic selectors of IPSec connections associated with the same user gateway and VPN gateway should not overlap.	The protected data flows of IPsec-VPN connections that are associated with the same VPN gateway and customer gateway cannot overlap.
400	ModifyIkeV1WithMultiRoutes.Invalid	Failed to modify VPN connection parameters. Multi-network is configured while using IkeV1 protocol.	Failed to modify VPN connection parameters. Multi-network is configured while using IkeV1 protocol.
403	Forbbiden.SubUser	User not authorized to operate on the specified resource as your account is created by another user.	You are unauthorized to perform this operation on the specified resource. Acquire the required permissions and try again.
403	Forbidden	User not authorized to operate on the specified resource.	You do not have the permissions to manage the specified resource. Apply for the permissions and try again.
404	InvalidVpnConnectionInstanceId.NotFound	The specified vpn connection instance id does not exist.	The specified vpn connection instance id does not exist.
500	OperationFailed.RouteConflictWithIPsecServer	Operation failed because the specified route conflicts with IPsec server.	The route conflicts with the IPsec server.

For a list of error codes, visit the Service error codes.

Change history

Change time	Summary of changes	Operation
2024-01-04	API Description Update. The Error code has changed	View Change Details
2023-10-23	The Error code has changed	View Change Details
2023-10-19	The API operation is not deprecated.. The Error code has changed. The response structure of the API has changed	View Change Details
2023-08-01	API Description Update. The Error code has changed. The response structure of the API has changed	View Change Details
2023-06-30	The Error code has changed. The request parameters of the API has changed. The response structure of the API has changed	View Change Details