All Products
Search

This Product

    Virtual Private Cloud:AssociateEipAddressBatch

    Document Center

    Virtual Private Cloud:AssociateEipAddressBatch

    Last Updated:Nov 13, 2024

    Associates elastic IP addresses (EIPs) with an instance in the same region.

    Operation description

    • You can call the AssociateEipAddressBatch operation to associate EIPs with an instance in the same region. The instance must be a NAT gateway or a secondary elastic network interface (ENI). For more information about how to associate EIPs with other instances, see AssociateEipAddress .

    • AssociateEipAddressBatch is an asynchronous operation. After a request is sent, the system returns a request ID and runs the task in the background. You can call the DescribeEipAddresses operation to query the status of the task.

      • If the EIP is in the Associating state, the EIP is being associated. You can only query the EIP and cannot perform other operations.
      • If the EIP is in the InUse state, the EIP is associated.

    • You cannot call the AssociateEipAddressBatch operation to associate an EIP with multiple instances at a time.

    Debugging

    You can run this interface directly in OpenAPI Explorer, saving you the trouble of calculating signatures. After running successfully, OpenAPI Explorer can automatically generate SDK code samples.

    Authorization information

    The following table shows the authorization information corresponding to the API. The authorization information can be used in the Action policy element to grant a RAM user or RAM role the permissions to call this API operation. Description:

    • Operation: the value that you can use in the Action element to specify the operation on a resource.
    • Access level: the access level of each operation. The levels are read, write, and list.
    • Resource type: the type of the resource on which you can authorize the RAM user or the RAM role to perform the operation. Take note of the following items:
      • The required resource types are displayed in bold characters.
      • If the permissions cannot be granted at the resource level, All Resources is used in the Resource type column of the operation.
    • Condition Key: the condition key that is defined by the cloud service.
    • Associated operation: other operations that the RAM user or the RAM role must have permissions to perform to complete the operation. To complete the operation, the RAM user or the RAM role must have the permissions to perform the associated operations.
    OperationAccess levelResource typeCondition keyAssociated operation
    vpc:AssociateEipAddressBatchupdate
    • Address
      acs:vpc:{#regionId}:{#accountId}:eip/{#AllocationId}
    • Instance
      acs:vpc:{#regionId}:{#accountId}:instance/{#InstanceId}
    • NatGateway
      acs:vpc:{#regionId}:{#accountId}:natgateway/{#NatGatewayId}
      none
    		none

    Request parameters

    ParameterTypeRequiredDescriptionExample
    RegionIdstringYes

    The ID of the region to which the EIPs belong. You can call the DescribeRegions operation to query the region ID.

    		cn-hangzhou
    BindedInstanceIdstringYes

    The ID of the instance with which you want to associate the EIPs.

    The instance can be a NAT gateway or a secondary ENI.

    		ngw-hp3akk9irtd69jad****
    BindedInstanceTypestringYes

    The type of the instance with which you want to associate the EIPs. Valid values:

    • Nat: NAT gateway
    • NetworkInterface: secondary ENI
    		Nat
    ModestringNo

    The association mode. Set the value to MULTI_BINDED, which specifies the Multi-EIP-to-ENI mode.

    This parameter is required only when BindedInstanceType is set to NetworkInterface.

    		MULTI_BINDED
    InstanceIdsarrayYes

    The EIPs to be associated with the instance.

    You must enter at least one EIP. You can enter up to 50 EIPs.

    stringYes

    The IDs of the EIPs to be associated with the instance.

    You must enter at least one ID. You can enter up to 50 IDs.

    		eip-2zeerraiwb7ujsxdc****
    ClientTokenstringNo

    The client token that is used to ensure the idempotence of the request.

    You can use the client to generate a token, but you must make sure that the token is unique among different requests. The token can contain only ASCII characters.

    Note If you do not specify this parameter, the system automatically uses the request ID as the client token. The request ID may be different for each request.
    		02fb3da4-130e-11e9-8e44-0016e04115b

    Response parameters

    ParameterTypeDescriptionExample
    object

    The response parameters.

    RequestIdstring

    The request ID.

    		54B48E3D-DF70-471B-AA93-08E683A1B45

    Examples

    Sample success responses

    JSONformat

    {
  "RequestId": "54B48E3D-DF70-471B-AA93-08E683A1B45"
}

    Error codes

    HTTP status codeError codeError messageDescription
    400InvalidAssociation.DuplicatedSpecified instance already is associated.An EIP or a GA instance is already associated with the specified instance. You must disassociate the EIP or GA instance from the specified instance before you can perform the operation.
    400OperationDeniedSpecified instance is not in VPC.The specified instance does not exist in the VPC.
    400InvalidParameter.MismatchSpecified elastic IP address and ECS instance are not in the same region.The EIP and ECS instance do not belong to the same region.
    400IncorrectEipStatusCurrent elastic IP status does not support this operationThe status of the EIP does not support the operation.
    400IncorrectInstanceStatusCurrent instance status does not support this operation.This operation cannot be performed while the instance is in the current state.
    400InvalidInstanceType.ValueNotSupportedThe specified value of InstanceType is not supported.InstanceType is set to an invalid value.
    400IncorrectHaVipStatusHaVip can be operated by this action only when it's status is Available or InUse.The operation supports only HAVIPs in the Available or InUse state.
    400InvalidParameterThe specified parameter is not valid.The parameter is set to an invalid value.
    400OperationDeniedEip of default vpc not allow this operationThe operation is not supported by EIPs in a default VPC.
    400ForbiddenThe eip instance owener errorThe EIP does not belong to your account. Check whether you have the permissions to perform the operation on the EIP.
    400TaskConflictThe eip operate too frequent, TaskConflict.Operations are too frequent and tasks conflict with each other.
    400InvalidBindingStatusThe eip binding status invalid.The EIP is in an invalid state.
    400BIND_INSTANCE_HAVE_PORTMAP_OR_BIND_EIPThe instance may have portMap or already bind eip.A port forwarding rule is configured for the ECS instance. Delete the port forwarding rule and try again.
    400EIP_CAN_NOT_ASSOCIATE_WITH_PUBLIC_IPinstance already bind natpublicip,cannot bind eip.-
    400BIND_INSTANCE_OWENER_ERRORCannot operate the eip.You are unauthorized to manage the specified EIP.
    400NATGATEWAY_FINANCIALLOCKEDThe NatGateway has expire, cannot do bind operation.-
    400InvalidParameter.InstanceTypeNotSupportThe specified instance type is not support.-
    400QuotaExceeded.NumberOfTrafficEipThe number of traffic eip on natgw exceed limitation.-
    400QuotaExceeded.NumberOfEipBinded eip Quota exceed on this NatGw.The number of EIPs associated with the NAT gateway exceeds the upper limit.
    400InvalidEipBandwidth.OutOfMaxValueThe Eip Bandwidth is invalid.-
    400Forbidden.EipCanNotBindGatgwEip can not bind on natgw.-
    400InvalidAction.DeniedAction is denied due to unfinished Eip configuration modification.The EIP configurations are not complete and the operation is denied.
    400InstanceType.NotSupportThe instance type is invalid.-
    400InvalidParams.NotFoundinstance not foundThe specified instance does not exist.
    400BindInstance.NotSupportedbind instance type %s is not supported.-
    400Forbidden.InstanceBandwidthNotZeroEip can not bind with instance when it's bandwidth is not zero.-
    400INSTANCE_TYPE_NOT_SUPPORTThe instance type is invalid.-
    400ServerRegion.InvalidEip bind remote server region invalid.-
    400Eni.AttachedThe eni should be detached from ecs when associating with direct eip.If the ENI is associated with an EIP in cut-through mode, you must disassociate the ENI from the ECS instance.
    400Invalid.DirectEip.BindTypeThe direct eip can be only associated with eni.-
    400Invalid.Function.NotSupportedMulti-IP function is under test, the region or uid is not supported.-
    400InvalidStatus.EniStatusNotSupport%s-
    400InvalidParameter.EniInstanceId%s-
    400%s%s-
    400EipBatchBind.TypeNotSupporteip batch bind type not support-
    400OperationFailed.RegionNotMatchThe specified eip is not in this region-
    400InvalidEIPStatus.BizDisabledThe EIP has been locked.The error message returned because the EIP is locked.
    400Forbidden.FinancialLockedThe ip business status is invalid.The error message returned because the instance has overdue payments.
    400OperationDenied.UnauthorizedThe operation is not allowed because the user is not in the whitelist.The operation is not allowed because you are not in the whitelist.
    400OperationDenied.UnsupportedEipBindModeThe operation is not supported for the NAT gateway due to its EIP binding mode.The operation is not supported by the EIP binding mode of the NAT gateway.
    400OperationDenied.Ipv4GatewayExistThe operation is not allowed because of Ipv4GatewayExist.The EIP failed to be associated because IPv4 gateways exist in the VPC.
    404InvalidAllocationId.NotFoundSpecified allocation ID is not found.The error message returned because the specified EIP does not exist. Check whether the value of the parameter is valid.
    404InvalidInstanId.NotFoundSpecified instance does not exist.The specified instance does not exist.
    404InvalidRegionId.NotFoundSpecified value of InstanceRegionId is not supported.-
    404InvalidAllocationId.NotFoundSpecified allocation ID is not foundThe specified EIP does not exist. Check whether the specified value is valid.
    404Forbidden.RegionNotFoundSpecified instance is not found during access authentication.The error message returned because the region is not supported.
    404OperationDenied.VpcIpv4GatewayEnabledThe operation is not allowed because of the VPC of the NAT gateway has opened IPv4 Gateway.IPv4 gateways are enabled for the VPC where the NAT gateway resides and the operation is denied.

    For a list of error codes, visit the Service error codes.

    Change history

    Change timeSummary of changesOperation
    2023-09-21API Description Update. The API operation is not deprecated.. The Error code has changedView Change Details
    2023-06-26The Error code has changedView Change Details
    2023-05-15The Error code has changedView Change Details
    2023-03-23The Error code has changedView Change Details