ListNatIps - NAT Gateway - Alibaba Cloud Documentation Center

Queries NAT IP addresses.

Debugging

You can run this interface directly in OpenAPI Explorer, saving you the trouble of calculating signatures. After running successfully, OpenAPI Explorer can automatically generate SDK code samples.

Debug

Authorization information

There is currently no authorization information disclosed in the API.

Request parameters

Parameter	Type	Required	Description	Example
RegionId	string	Yes	The ID of the region where the NAT gateway is deployed. You can call the DescribeRegions operation to query the most recent region list.	eu-central-1
NatGatewayId	string	Yes	The ID of the NAT gateway.	ngw-gw8v16wgvtq26vh59****
NatIpCidr	string	No	The CIDR block to which the IP address belongs.	192.168.0.0/24
DryRun	boolean	No	Specifies whether to only precheck the request. Valid values: true: checks the API request. IP addresses are not queried. The system checks the required parameters, request syntax, and limits. If the request fails to pass the precheck, the corresponding error message is returned. If the request passes the precheck, the `DryRunOperation` error code is returned. false (default): sends the request. If the request passes the precheck, a 2xx HTTP status code is returned and the operation is performed.	false
ClientToken	string	No	The client token that is used to ensure the idempotence of the request. You can use the client to generate the value, but you must make sure that it is unique among different requests. The token can contain only ASCII characters and cannot exceed 64 characters in length. Note If you do not set this parameter, the system automatically uses RequestId as ClientToken. RequestId may be different for each API request.	5A2CFF0E-5718-45B5-9D4D-70B3FF3898
NatIpStatus	string	No	The status of the IP address. Valid values: Available Deleting Creating	Available
NextToken	string	No	The token that is used for the next query. Valid values: If this is your first query or no next query is to be sent, ignore this parameter. If a next query is to be sent, set the value to the value of NextToken that is returned from the last call.	FFmyTO70tTpLG6I3FmYAXGKPd****f84eb48b699f0a4883
MaxResults	string	No	The number of entries to return on each page. Valid values: 1 to 100. Default value: 20.	20
NatIpName	array	No	The name of the IP address. Valid values of N: 1 to 20.
	string	No	The name of the IP address. Valid values of N: 1 to 20.	test
NatIpIds	array	No	The ID of the IP address. Valid values of N: 1 to 20.
	string	No	The ID of the IP address. Valid values of N: 1 to 20.	vpcnatcidr-gw8ov42ei6xh1jys2****

Response parameters

Parameter	Type	Description	Example
	object
NextToken	string	The token that is used for the next query. Valid values: If the value of NextToken is not returned, it indicates that no next query is to be sent. If the value of NextToken is returned, the value indicates the token that is used for the next query.	FFmyTO70tTpLG6I3FmYAXGKPd****
RequestId	string	The ID of the request.	7E78CEEA-BF8F-44D1-9DCD-D9141135B71E
TotalCount	string	The number of IP addresses that are returned.	1
NatIps	array<object>	The list of IP addresses of the NAT gateway.
NatIp	object
IsDefault	boolean	Indicates whether the IP address is the default IP address of the NAT gateway. Valid values: true: yes false: no	true
NatIp	string	The IP address.	192.168.0.126
NatIpCidr	string	The CIDR block to which the IP address belongs.	192.168.0.0/24
NatIpId	string	The ID of the IP address.	vpcnatip-gw8a863sut1zijxh0****
NatIpDescription	string	The description of the IP address.	default
NatGatewayId	string	The ID of the Virtual Private Cloud (VPC) NAT gateway to which the IP address is assigned.	ngw-gw8v16wgvtq26vh59****
NatIpName	string	The name of the IP address.	default
NatIpStatus	string	The status of the IP address. Valid values: Available: available Deleted: deleted Deleting: deleting Creating: creating Associated: specified in an SNAT or DNAT entry Associating: being specified in an SNAT or DNAT entry	Available

Examples

Sample success responses

JSONformat

{
  "NextToken": "FFmyTO70tTpLG6I3FmYAXGKPd****",
  "RequestId": "7E78CEEA-BF8F-44D1-9DCD-D9141135B71E",
  "TotalCount": "1",
  "NatIps": [
    {
      "IsDefault": true,
      "NatIp": "192.168.0.126",
      "NatIpCidr": "192.168.0.0/24",
      "NatIpId": "vpcnatip-gw8a863sut1zijxh0****",
      "NatIpDescription": "default",
      "NatGatewayId": "ngw-gw8v16wgvtq26vh59****",
      "NatIpName": "default",
      "NatIpStatus": "Available"
    }
  ]
}

Error codes

HTTP status code	Error code	Error message	Description
404	InvalidRegionId.NotFound	The specified RegionId does not exist in our records.	The specified region ID does not exist.

For a list of error codes, visit the Service error codes.

Change history

Change time	Summary of changes	Operation
2024-07-23	API Description Update. The Error code has changed	View Change Details
2023-03-01	The Error code has changed	View Change Details