Creates a custom route entry in the route table of a VRouter or virtual border router (VBR).
Operation description
-
CreateRouteEntry is an asynchronous operation. After a request is sent, the system returns a request ID and runs the task in the background. You can call the DescribeRouteEntryList operation to query the status of the task:
- If a route is in the Creating state, the route is being added.
- If a route is in the Created state, the route is added.
-
You cannot repeatedly call CreateRouteEntry within a specific period of time.
When you call this operation to add a custom route entry to the route table of a vRouter, take note of the following limits:
Note
When you add a route entry from a prefix list, the quota usage is calculated by adding the number of existing route entries and the maximum number of route entries of the prefix list.
-
A route table can contain up to 200 custom route entries.
-
The destination CIDR block (DestinationCidrBlock) of a custom route entry cannot be the same as or be a subset of the CIDR block of a vSwitch in the virtual private cloud (VPC). The destination CIDR block can contain the CIDR block of a vSwitch.
-
The destination CIDR block (DestinationCidrBlock) of a custom route entry cannot be 100.64.0.0/10 or a subset of it.
-
The destination CIDR blocks (DestinationCidrBlock) of route entries in the same route table must be unique.
-
If you do not include the mask length when you specify the destination CIDR block (DestinationCidrBlock), the destination CIDR block is considered a host IP address whose mask length is 32 bits.
-
Multiple custom route entries can point to the same next hop (NextHopId).
-
The next hop (NextHopId) of a custom route entry must in the same VPC as the route table.
-
Equal-cost multi-path (ECMP) routing can be configured by specifying the NextHopList parameter.
- When you add non-ECMP route entries, you must specify DestinationCidrBlock, NextHopType, and NextHopId, and you must not specify NextHopList.
- When you add route entries for ECMP routing, you must specify DestinationCidrBlock and NextHopList, and you must not specify NextHopType or NextHopId.
When you call this operation to add a custom route entry to the route table of a VBR, take note of the following limits:
- A route table can contain up to 200 custom route entries.
- NextHopList is not supported.
- The destination CIDR block (DestinationCidrBlock) of a custom route entry cannot be 100.64.0.0/10 or a subset of it.
- The destination CIDR blocks (DestinationCidrBlock) of route entries in the same route table must be unique.
- If you do not include the mask length when you specify the destination CIDR block (DestinationCidrBlock), the destination CIDR block is considered a host IP address whose mask length is 32 bits.
- Multiple custom route entries can point to the same next hop (NextHopId).
- The next hop (NextHopId) of a custom route entry must be a router interface associated with the VBR.
- You can add route entries only when the VBR is in the Active state, and the Express Connect circuit associated with the VBR is in the Enabled state and is not locked due to overdue payments.
- Only non-ECMP route entries are supported. When you add non-ECMP route entries, you must specify DestinationCidrBlock, NextHopType, and NextHopId, and you cannot specify NextHopList.
Debugging
Authorization information
The following table shows the authorization information corresponding to the API. The authorization information can be used in the Action policy element to grant a RAM user or RAM role the permissions to call this API operation. Description:
- Operation: the value that you can use in the Action element to specify the operation on a resource.
- Access level: the access level of each operation. The levels are read, write, and list.
- Resource type: the type of the resource on which you can authorize the RAM user or the RAM role to perform the operation. Take note of the following items:
- The required resource types are displayed in bold characters.
- If the permissions cannot be granted at the resource level,
All Resourcesis used in the Resource type column of the operation.
- Condition Key: the condition key that is defined by the cloud service.
- Associated operation: other operations that the RAM user or the RAM role must have permissions to perform to complete the operation. To complete the operation, the RAM user or the RAM role must have the permissions to perform the associated operations.
| Operation | Access level | Resource type | Condition key | Associated operation |
|---|---|---|---|---|
| vpc:CreateRouteEntry | create |
|
| none |
Request parameters
| Parameter | Type | Required | Description | Example |
|---|---|---|---|---|
| RegionId | string | No | The region ID of the route table. You can call the DescribeRegions operation to query the most recent region list. | cn-hangzhou |
| RouteTableId | string | Yes | The ID of the route table to which you want to add a custom route entry. | vtb-bp145q7glnuzd**** |
| DestinationCidrBlock | string | Yes | The destination CIDR block of the custom route entry. Both IPv4 and IPv6 CIDR blocks are supported. Make sure that the destination CIDR block meets the following requirements:
| 192.168.0.0/24 |
| NextHopId | string | No | The ID of the next hop. | i-j6c2fp57q8rr4jlu**** |
| ClientToken | string | No | The client token that is used to ensure the idempotence of the request. You can use the client to generate the value, but you must make sure that the value is unique among different requests. The ClientToken value can contain only ASCII characters. Note
If you do not specify this parameter, ClientToken is set to the value of RequestId. The value of RequestId for each API request may be different.
| 02fb3da4-130e-11e9-8e44-001**** |
| RouteEntryName | string | No | The name of the custom route entry that you want to add. The name must be 1 to 128 characters in length, and cannot start with | test |
| Description | string | No | The description of the custom route entry. The description must be 1 to 256 characters in length, and cannot start with | test |
| NextHopType | string | No | The type of next hop of the custom route entry. Valid values:
| RouterInterface |
| NextHopList | array<object> | No | The next hop list. | |
| object | No | The next hop list. | ||
| NextHopId | string | No | The ID of the next hop of the ECMP route. | ri-2zeo3xzyf3cd8r4**** |
| Weight | integer | No | The weight of the next hop of the ECMP route entry. | 10 |
| NextHopType | string | No | The type of next hop of the ECMP route entry. Set the value to RouterInterface. | RouterInterface |
Response parameters
Examples
Sample success responses
JSONformat
{
"RouteEntryId": "rte-sn6vjkioxte1gz83z****",
"RequestId": "0ED8D006-F706-4D23-88ED-E11ED28DCAC0"
}Error codes
| HTTP status code | Error code | Error message | Description |
|---|---|---|---|
| 400 | IllegalParam.CidrBlock | The specified CidrBlock is illegal. | The operation failed because CidrBlock is set to an invalid value. |
| 400 | QuotaExceeded | Route entry quota exceeded in this route table. | The number of route entries in the route table has reached the upper limit. |
| 400 | MissingParameter | Miss mandatory parameter. | Some required parameters are not specified. Specify all required parameters and try again. |
| 400 | InvalidCidrBlock.Malformed | Specified CIDR block is not valid. | The format of the CIDR block is invalid. |
| 400 | InvalidCIDRBlock.Duplicate | Specified CIDR block is already exists. | This CIDR block already exists in the routing table. |
| 400 | IncorrectVpcStatus | Current VPC status does not support this operation. | This operation cannot be performed when the VPC is in the current state. |
| 400 | IncorrectInstanceStatus | Current instance status does not support this operation. | This operation cannot be performed while the instance is in the current state. |
| 400 | IncorrectRouteEntryStatus | Some route entry status blocked this operation. | The operation is not supported because the route table contains routes in the Pending or Modifying state. |
| 400 | IncorrectVSwitchStatus | The current virtual switch status does not support this operation. | The error message returned because the vSwitch is in the Pending state and cannot be deleted. |
| 400 | InvalidCidrBlock | Specified CIDR block is not valid. | Possible reasons for error reporting: 1. You are not in the whitelist of the 10.0.0.0/8 CIDR block and cannot use this CIDR block. 2. The target CIDR block of the added custom route cannot belong to the CIDR block of all VSwitches under the same VPC. 3. Because 100.64.0.0/10 is a cloud service address, you cannot add this CIDR block to point to the IDC under the cloud. 4. Except for 100.64.0.0/10, the detailed route network segments such as 100.64.0.0/11 and 100.96.0.0/11 cannot be used in the IDC under the cloud. |
| 400 | InvalidNextHop.NotFound | Specified next hop does not exist. | The specified next hop does not exist. |
| 400 | InvalidVRouter.NotFound | vRouter not exists. | The specified vRouter does not exist. Check whether the specified vRouter is valid. |
| 400 | InvalidVPC.NotFound | vpc not exists. | The VPC does not exist. Check whether the specified VPC is valid. |
| 400 | InvalidNexthopTypeAndList.BothNull | both nexthopType and nextHopList are null. | NextHopType and NextHopList are not specified. |
| 400 | InvalidNexthopTypeAndList.BothNotNull | both nexthopType and nextHopList are not null. | You cannot leave both NextHopType and NextHopList empty. |
| 400 | InvalidRouterInterface | invalid router interface. | The specified router interface does not exist. |
| 400 | InvalidOppositeRouterType | nexthop list cannot only contain router interface whose opposite router interface is on vbr. | The specified next hop is invalid. The peer router of the router interface that you specify as the next hop must be a VBR. |
| 400 | InvalidNexthopListSize | nexthop size is illegal. Must be between 2 and 4. | You must specify two to four router interfaces as next hops. |
| 400 | InvalidEntryRuleQuota.NotFound | Route entry quota rule not exists. | The quota rules of route entries do not exist. |
| 400 | Forbidden.CheckEntryRuleQuota | Route entry quota rule check error. | An error occurred when the system was checking the quota of route entries. |
| 400 | InvalidVBRStatus | invalid virtual border router status. | The VBR is in an invalid state. |
| 400 | InvalidPhysicalConnectionBusinessStatus | invalid physical connection business status. | The Express Connect circuit is in an invalid state. |
| 400 | InvalidRouterType | Cannot specify nexthop list in vbr's route table. | The specified next hop does not exist in the VBR routing table |
| 400 | IncorrectHaVipStatus | This operation is denied because satus of the specified HaVip is neither Available nor InUse. | You cannot perform the operation when the specified HAVIP is in the Available or InUse state. |
| 400 | CountLimitExceed.HaVipRouteEntry | The count of route entry to HaVip in one route table is exceeded. | The number of routes that point to the HAVIP in a route table exceeds the upper limit. |
| 400 | InvalidRouteEntry.Duplicate | The route entry already exist. | The specified route entry already exists. |
| 400 | IncorrectRouteEntryStatus | Specified routeEntry status error. | The operation is not supported because the route table contains routes in the Pending or Modifying state. |
| 400 | IncorrectRouteEntryStatus | VBR has NotStable route entry. | The operation is not supported because the route table contains routes in the Pending or Modifying state. |
| 400 | InvalidParam | The Ecmp routerEntry with router interfaces local vgw vip not match. | The Ecmp routerEntry with router interfaces local vgw vip not match. |
| 400 | INVALID_WEIGHT_PARAM | Specified value of weight invalid | The specified weight is invalid. |
| 400 | FORBIDDEN_USE_VPC_AS_INTERNET_GATEWAY | The Specified CIDR must be in vpc CIDR. | The specified CIDR block must be a subset of the VPC CIDR block. |
| 400 | InvalidNexthop | The Specified nexthop illegal. | - |
| 400 | INVALID_VPC_ID | The Specified VpcId not match. | The specified VPC does not exist. |
| 400 | InvalidRouteEntrySize | The Specified routerEntry size not legal. | You must specify two to four router interfaces as next hops if you want to configure ECMP routing. |
| 400 | TaskConflict | The operation is too frequent, please wait a moment and try again. | Your requests are too frequent. Try again later. |
| 400 | InvalidRouteEntry | Specified routeEntry not exist. | The specified route entry does not exist. |
| 400 | InvalidDestinationCidrBlock | The specified destinationCidrBlock must not included in black list cidr. | - |
| 400 | Forbidden.VRouterNotFound | Specified virtual switch is not found during access authentication. | The specified vSwitch is not found during access authentication. |
| 400 | DefaultValidate.Error | validte fail. | - |
| 400 | Region.NotSupport | The specified region does not currently support nextHopType for networkInterface | - |
| 400 | OperationFailed.NotifyCenCreate | Failed to notify cen when create route entry. | - |
| 400 | Forbidden.PrivateIpNotFound | Private ip address not exist. | - |
| 400 | OperationUnsupported.InactiveMode | Vpc multi scope route only support active standby. | - |
| 400 | InvalidRouteEntryName.Malformed | Specified RouteEntry name is not valid. | The new name of the route is invalid. |
| 400 | IncorrectStatus.MultiScopeRiRouteEntry | MultiScope ri status must not in idle. | - |
| 400 | OperationUnsupported.MoreThanOneVpnOrHavip | MultiScope can not support more than one vpn/havip. | - |
| 400 | OperationUnsupported.EcmpRiTypeOrNumber | Emcp entry not supported if vpc-vbr or vbr-vlan ri does not exist. | - |
| 400 | Duplicated.VpcNextHop | Route entry nexthop duplicate. | Duplicate next hops are specified. |
| 400 | OperationUnsupported.SubRouteTableECMP | Vpc subRouteTable don't support ecmp or multiScope. | - |
| 400 | InvalidNexthop.NotFound | VRouterEntry nexthop does not exist. | - |
| 400 | IllegalParam.NextHopId | Instance not exists or not vpc vm. | - |
| 400 | InvalidVpnInstanceId.NotFound | %s | - |
| 400 | OperationFailed.ScopeActiveRouteEntryType | %s | - |
| 400 | OperationFailed.ScopeStandbyRouteEntryQuota | %s | - |
| 400 | OperationFailed.ScopeActiveRouteEntryQuota | %s | - |
| 400 | OperationUnsupported.ScopeInvalidRouteType | %s | - |
| 400 | OperationFailed.EcmpInvalidRouterInterfaceOppositeType | %s | - |
| 400 | OperationUnsupported.Ipv6EcmpRouteEntry | %s | - |
| 400 | OperationUnsupported.Ipv6CidrBlock | %s | - |
| 400 | OperationUnsupported.Ipv6ForVBR | %s | - |
| 400 | QuotaExceeded.HaVipRouteEntry | Vpc havip route entry quota exceed. | - |
| 400 | InvalidNexthop.DirectEni | The direct Eni cannot be nexthop. | An ENI in cut-through mode cannot be specified as a next hop. |
| 400 | OperationFailed.InvalidNexthop | vpc multi scope route must has a enable nexthop. | - |
| 400 | OperationFailed.NotifyCenDelete | Failed to notify cen when delete route entry. | - |
| 400 | InvalidNatGateway.NotFound | Natgateway not exist. | - |
| 400 | OperationFailed.CxpRouteExist | Cxp route alreay existed. | - |
| 400 | IncorrectStatus.RouteTableStatus | %s | - |
| 400 | OperationFailed.GetEniInfo | Failed to get networkInterface info. | - |
| 400 | QuotaExceeded.EcmpRouteEntryNextHopCount | %s | - |
| 400 | OperationFailed.InvalidNextHopType | %s | - |
| 400 | OperationUnsupported.InvalidRouterInterfaceType | Only vpc vbr interface support ecmp route. | - |
| 400 | InvalidHaVip.NotFound | The specified HaVip does not exist in the specified region. | - |
| 400 | OperationFailed.MultiScopeType | The specified nexthop type is not support in multiScope. | - |
| 400 | OperationFailed.DistibuteLock | Distibute lock fail. | The operation is locked by another request; |
| 400 | QuotaExceeded.VpnRouteEntry | Vpn route entry quota exceeded. | The system failed to create the route because the number of routes in the VPN gateway route table has reached the upper limit. |
| 400 | InvalidAttachment.NotFound | The attachment is not found. | The specified transit router does not exist. |
| 400 | OperationFailed.ActiveNetworkInterfaceNotFound | No active network interface is found on the attachment. | No ENI is available on the specified transit router. |
| 400 | InvalidNetworkInterface.NotFound | The network interface is not found on the attachment. | No ENI is associated with the specified transit router. |
| 400 | OperationFailed.QueryAttachmentInfo | Failed to query attachment information. | The system fails to query the transit router. |
| 400 | IllegalParam.AttachmentId | The attachment is invalid. | The specified transit router is invalid. |
| 400 | OperationFailed.NotSupportIPV6 | The specified next hop does not support IPv6. | The specified next hop does not support IPv6. |
| 400 | IncorrectStatus.Ipv6Address | The IPv6 address of the specified next hop is being assigned or deleted. | The IPv6 address that is specified as the next hop is being created or being deleted. |
| 400 | OperationUnsupported.Ipv6EntryOnPrimaryNetworkInterface | You cannot create IPv6 route entries on a primary network interface. | You cannot create an IPv6 route whose next hop is a primary ENI. |
| 400 | OperationUnsupported.SpecifyIpOnIpv6Entry | You cannot specify the private IP address when you create IPv6 route entries. | You cannot specify a private IPv6 address as the destination CIDR block. |
| 400 | OperationUnsupported.MutipleIpv6Address | You cannot specify a next hop that has bound multiple IPv6 addresses. | You cannot specify a next hop that is assigned multiple IPv6 addresses. |
| 400 | OperationDenied.Ipv6EntryOnCustomTable | You cannot create any IPv6 route entry on a custom route table. | - |
| 400 | OperationDenied.CloudBoxVbrEntryAllowedInCustomRouteTable | The operation is not allowed because only the custom routing table can add a routing entry with the next hop pointing to the cloud box type VBR. | - |
| 400 | OperationDenied.RouteTableAssociateNotCloudBoxVSwitch | The operation is not allowed because of the routing table is bound to a non-cloud box type vswitch, and routing entries pointing to the cloud box VBR cannot be added. | The operation is not allowed because the route table is associated with a non-CloudBox vSwitch. You cannot add routes that point to VBRs of the CloudBox instance. |
| 400 | OperationDenied.VbrMisMatchCloudBox | The operation is not allowed because the routing table is bound to a cloud box vswitch, and routing entries pointing to other cloud box VBRs cannot be added. | The operation failed because the route table is associated with the vSwitch of a CloudBox instance. You cannot add routes that point to VBRs of other CloudBox instances. |
| 400 | OperationDenied.VbrIdle | The operation is not allowed because the next hop of the added routing entry is a VBR type RI at the opposite end, which cannot be in an idle state. | The operation failed because the next hop of the added route is a router interface whose peer device is a VBR, and the VBR must not be in the Idle state. |
| 400 | OperationDenied.RouterInterfaceToDifferentVpc | The operation is not allowed because the router interface is connected to different VPCs. | The operation failed because the router interfaces point to different VPCs. |
| 400 | OperationDenied.RouterInterfaceFromDifferentZones | The operation is not allowed because the router interface resides in different zones. | - |
| 400 | OperationFailed.PconnTrafficNotEnable | The operation is failed because of PconnTrafficNotEnable. | Billing for outbound data transfer is disabled. |
| 400 | ResourceNotFound.VpcPeer | The specified resource of %s is not found. | The peer VPC cannot be found. |
| 400 | IncorrectStatus.VpcPeer | The status of %s [%s] is incorrect. | The status of %s[%s] is invalid. |
| 400 | OperationDenied.RouteTableTypeNotPermitted | The operation is not allowed because the type of route table is not permitted. | You cannot create routes for route tables of the specified type. |
| 400 | OperationDenied.GatewayRouteTableNotPermitted | The operation is not allowed to create a route pointing to this nextHop type on gateway route table. | You cannot create routes that point to instances of this type in the gateway route table. |
| 400 | UnsupportedFeature.VpcPeerIpv6 | IPv6 route entries for VPC peering connections cannot be created in this region. | The error message returned because the peer of the router interface is a VPC and you cannot create a route whose next hop type is IPv6 address in this region. |
| 400 | OperationDenied.VpcIpv6NotEnabled | IPv6 has not been enabled for the VPC. | The error message returned because the VPC does not support IPv6 and the operation is denied. |
| 400 | IncorrectStatus.Ipv4Gateway | The status of Ipv4Gateway is incorrect. | The error message returned because the IPv4 gateway is unstable. |
| 400 | ResourceNotFound.PrefixList | The specified resource of prefixList is not found. | The prefix list does not exist. |
| 400 | UnsupportedFeature.CreatePrefixListEcmpRouteEntry | The feature of creating ecmp route entry with prefixList is not supported. | You cannot create ECMP routes by using a prefix list. |
| 400 | OperationDenied.RouterInterfaceIpv6NotEnabled | Routerinterface does not support IPv6. | The operation failed because the router interface does not support IPv6. |
| 400 | OperationDenied.NextHopTypeNotPermitted | The operation is not allowed because the nextHop type is invalid. | You are not allowed to create a route whose next hop is of this type. |
| 400 | ResourceAlreadyAssociated.PrefixList | The operation failed because the specified prefixList route entry already exists. | The operation failed because the prefix list route already exists. |
| 400 | OperationFailed.CidrConflictWithPrefixList | The specified CIDR block already exists in a prefixList route entry. | The route conflicts with an existing prefix list route. |
| 400 | ResourceNotFound.Ipv4Gateway | Specified Ipv4Gateway does not exist. | The specified IPv4 gateway is not found. |
| 400 | Mismatch.HaVipIdAndRouteTableId | The HaVip and RouteTable are mismatched. | The specified HAVIP and route table do not belong to the same VPC. |
| 400 | OperationFailed.OperationLocked | The operation failed because the nextHop instance is in the O&M lock state. | The operation failed because the next hop instance is locked for O&M. |
| 400 | Mismatch.Ipv4GatewayIdAndRouteTableId | The specified IPv4Gateway and RouteTable are not matched. | The operation failed because the IPv4 gateway and route table do not belong to the same VPC. |
| 400 | OperationUnsupported.DestinationCidrBlockOverlapWithVSwitch | The destination IPv6 network segment specified in the route entry overlaps with the vSwitch network segment. | The error message returned because the destination IPv6 CIDR block of the route overlaps with the vSwitch CIDR block. |
| 400 | ResourceNotAssociated.Cen | The Vpc and Cen are not associated. | Failed to attach the VPC to the CEN instance. |
| 400 | IncorrectStatus.CenRelation | The status of Vpc in Cen is incorrect. | The operation failed because the VPC attached to the CEN instance is in an unstable state. |
| 400 | OperationDenied.CenTypeInvalid | The operation is not allowed because of Cen type is invalid.. | You cannot add a route that points to a CEN instance of this type to the route table. |
| 400 | ResourceNotFound.Cen | The specified resource of Cen is not found. | The operation failed because the CEN resources do not exist. |
| 400 | ResourceNotFound.NetworkInterface | The specified resource of network interface is not found. | The specified ENI does not exist. |
| 400 | RouteConflict.AlreadyExist | Route conflict exists in routing table. | Route conflicts exist in the route table. |
| 400 | IncorrectStatus.RouterInterface | The specified RouterInterface status is invalid. | The router interface status is abnormal. |
| 400 | InvalidNexthop.UnsupportedEniBizType | The biz type of NetworkInterface is illegal. | The biz type of NetworkInterface as the nexthop is illegal. |
| 400 | OperationDenied.RouterInterfaceIpv6 | RouterInterface does not support IPv6. | RouterInterface does not support IPv6. |
| 400 | InvalidNextHopType | Specified parameter "NextHopType" is not valid. | Specified parameter "NextHopType" is not valid. |
| 400 | OperationDenied.VbrAttachEcrInMiddleStatus | The operation is not allowed because of VBR attach or detach ECR in middle status. | The current operation cannot be performed because the VBR is in the process of loading or unloading the leased line gateway. Please wait a moment and try again. |
| 400 | ResourceNotAssociated.Ecr | The ECR is not associated. | The current resource is not associated with ECR and cannot perform this operation. Please check and try again. |
| 403 | IncorrectInstanceStatus | The current status of the resource does not support this operation. | The specified resource is in a state that does not support the operation. |
| 404 | InvalidParameter | Instance not exists or not vpc vm | - |
| 404 | InvalidNatGatewayId.NotFound | Specified value of NatGatewayId is not found in our record. | - |
| 404 | InvalidInstanId.NotFound | Specified instance does not exist. | The specified instance does not exist. |
| 404 | InvalidNextHopId.NotFound | Specified next hop does not exist. | The next hop does not exist. |
| 404 | InvalidRouteTableId.NotFound | Specified route table does not exist. | The specified route table does not exist. |
| 404 | InvalidHaVipId.NotFound | The specified HaVip does not exist in the specified VPC. | The specified HAVIP does not exist in the VPC. |
| 404 | InvalidNetworkInterface.NotFound | The specified networkInterface does not exist. | - |
| 404 | InvalidVpc.NotFound | Specified vpc is not found in our record. | - |
| 404 | OperationFailed.InstanceDismatchCurrentVpc | The specified instance does not exist in current vpc. | The specified instance does not exist in the VPC. |
| 404 | InvalidIpv6Gateway.NotFound | Specified Ipv6Gateway does not exist. | - |
| 500 | VPC.ERROR | error code 500,Internal server error. | - |
| 500 | InternalError | The request processing has failed due to some unknown error, exception or failure. | An internal error occurred. |
For a list of error codes, visit the Service error codes.
Change history
| Change time | Summary of changes | Operation |
|---|---|---|
| 2024-08-23 | The Error code has changed | View Change Details |
| 2024-08-12 | The Error code has changed | View Change Details |
| 2024-06-19 | The Error code has changed | View Change Details |
| 2024-06-13 | The Error code has changed | View Change Details |
| 2024-04-02 | The Error code has changed | View Change Details |
| 2024-03-25 | The Error code has changed | View Change Details |
| 2024-01-04 | The Error code has changed | View Change Details |
| 2023-09-25 | The Error code has changed | View Change Details |
| 2023-09-01 | The Error code has changed | View Change Details |
| 2023-07-25 | API Description Update. The Error code has changed | View Change Details |
| 2023-06-25 | The Error code has changed | View Change Details |
| 2023-06-21 | The Error code has changed | View Change Details |
| 2023-06-16 | The Error code has changed | View Change Details |
| 2023-06-09 | The Error code has changed | View Change Details |
| 2023-06-07 | The Error code has changed | View Change Details |
| 2023-06-06 | The Error code has changed | View Change Details |
| 2023-05-05 | The Error code has changed | View Change Details |
| 2023-05-04 | The Error code has changed | View Change Details |
| 2023-04-04 | The Error code has changed | View Change Details |
| 2023-03-07 | The Error code has changed | View Change Details |