All Products
Search
Document Center

Virtual Private Cloud:CreateBgpGroup

Last Updated:Aug 29, 2024

Creates a BGP group for a virtual border router (VBR).

Operation description

You can connect a VBR to a data center through BGP. Each BGP group is associated with a VBR. You can add a BGP peer that needs to communicate with a VBR to a BGP group and advertise the BGP network in the VBR.

BGP groups are used to simplify BGP configurations. You can add BGP peers that use the same configurations to one BGP group. Before you start, you must create a BGP group with the requested autonomous system number (ASN).

When you call this operation, take note of the following limits:

  • You can specify only the data center that is connected to the VBR through an Express Connect circuit as a BGP peer.
  • VBRs support only BGP-4.
  • You can create at most eight BGP peers for each VBR.
  • Each BGP peer supports at most 110 dynamic routes.
  • The ASN of Alibaba Cloud is 45104. You can specify a 2-byte or 4-byte ASN for the data center.

Debugging

OpenAPI Explorer automatically calculates the signature value. For your convenience, we recommend that you call this operation in OpenAPI Explorer.

Authorization information

The following table shows the authorization information corresponding to the API. The authorization information can be used in the Action policy element to grant a RAM user or RAM role the permissions to call this API operation. Description:

  • Operation: the value that you can use in the Action element to specify the operation on a resource.
  • Access level: the access level of each operation. The levels are read, write, and list.
  • Resource type: the type of the resource on which you can authorize the RAM user or the RAM role to perform the operation. Take note of the following items:
    • The required resource types are displayed in bold characters.
    • If the permissions cannot be granted at the resource level, All Resources is used in the Resource type column of the operation.
  • Condition Key: the condition key that is defined by the cloud service.
  • Associated operation: other operations that the RAM user or the RAM role must have permissions to perform to complete the operation. To complete the operation, the RAM user or the RAM role must have the permissions to perform the associated operations.
OperationAccess levelResource typeCondition keyAssociated operation
vpc:CreateBgpGroupcreate
  • VirtualBorderRouter
    acs:vpc:{#regionId}:{#accountId}:virtualborderrouter/{#VirtualBorderRouterId}
    none
none

Request parameters

ParameterTypeRequiredDescriptionExample
RegionIdstringYes

The region ID of the VBR.

You can call the DescribeRegions operation to query the most recent region list.

cn-shanghai
RouterIdstringYes

The ID of the VBR.

vbr-bp1ctxy813985gkuk****
NamestringNo

The name of the BGP group.

The name must be 2 to 128 characters in length, and can contain letters, digits, periods (.), underscores (_), and hyphens (-). The name must start with a letter.

test
DescriptionstringNo

The description of the BGP group.

The description must be 2 to 256 characters in length. It must start with a letter and cannot start with http:// or https://.

BGP
LocalAsnlongNo

The custom ASN on the Alibaba Cloud side. Valid values:

  • 45104
  • 64512~65534
  • 4200000000~4294967294
Note 65025 is reserved by Alibaba Cloud. By default, Alibaba Cloud uses 45104 as LocalAsn. If you use custom LocalAsn in multi-line access scenarios, loops in BGP may occur.
45104
PeerAsnlongYes

The ASN of the gateway device in the data center.

1****
AuthKeystringNo

The authentication key of the BGP group.

!PWZ2****
IsFakeAsnbooleanNo

Specifies whether to use a fake ASN. Valid values:

  • false (default)
  • true
Note A router that runs BGP typically belongs to only one AS. If you need to replace an existing AS with a new AS and you cannot immediately modify BGP configurations, you can use fake ASNs to ensure service continuity.
true
ClientTokenstringNo

The client token that is used to ensure the idempotence of the request.

You can use the client to generate the token, but you must make sure that the token is unique among different requests. The token can contain only ASCII characters.

Note If you do not specify this parameter, the system automatically uses the request ID as the client token. The request ID may be different for each request.
123e4567-e89b-12d3-a456-426655440000
IpVersionstringNo

The IP version. Valid values:

  • IPv4: This is the default value.
  • IPv6: IPv6 is supported only if the VBR for which you want to create the BGP group has IPv6 enabled.
IPv4
RouteQuotaintegerNo

The maximum number of routes supported by a BGP peer. Default value: 110.

110

Response parameters

ParameterTypeDescriptionExample
object

The ID of the BGP group.

BgpGroupIdstring

The ID of the BGP group.

bgpg-bp1k25cyp26cllath****
RequestIdstring

The request ID.

C1221A1F-2ACD-4592-8F27-474E02883159

Examples

Sample success responses

JSONformat

{
  "BgpGroupId": "bgpg-bp1k25cyp26cllath****",
  "RequestId": "C1221A1F-2ACD-4592-8F27-474E02883159"
}

Error codes

HTTP status codeError codeError messageDescription
400QuotaExceeded.Bgpbgp peer count per vbr quota exceed.The number of BGP peers in the VBR has reached the upper limit.
400QuotaExceeded.Nqanqa count per vbr quota exceed.The number of Network Quality Analyzers (NQAs) has reached the upper limit that is supported by the VBR.
400QuotaExceeded.BgpNetworkbgp network count per vbr quota exceed.The number of BGP networks in the VBR has reached the upper limit.
400InvalidPeerIpAddressmulti pconn peer ip can not be null.The IP addresses of multiple Express Connect circuits cannot be empty.
400InvalidVbrNetworkvbr netowrk not existsThe VBR does not exist. Check the VBR ID.
400InvalidBgpGroupbgp group not existsThe BGP group does not exist.
400InvalidBgpName.MalformedSpecified Bgp Group name is not valid.The name of the BGP group is invalid.
400InvalidBgpDescription.MalformedSpecified Bgp Group description is not valid.The description of the BGP group is invalid.
400InvalidBgpAuthkey.MalformedSpecified Bgp Group authkey is not valid.The authentication key of the BGP group is invalid.
400InvalidIP.MalformedIp malformed.The format of the IP address is invalid.
400InvalidPeerAsn.Malformedinvalid peer asn cannot equals aliyun asn:45104The AS number cannot be the same as the AS number on the Alibaba Cloud side.
400InvalidParams.NotNullparams must not null.The parameter is required.
400InvalidBgpGroup.LocalAsnInvalidThe specified BgpGroup LocalAsn is invalid, only support 64512 to 65534 or 4200000000 to 4294967294, but cannot be 65025.The local ASN of the BGP group is invalid. You must set a value from 64512 to 65534 or from 420000000 to 429496729.
400InvalidParams.NotFoundinstance not foundThe specified instance does not exist.
400InvalidParams.NotFoundvpc instance not foundThe VPC does not exist. Check whether the specified VPC is valid.
400InvalidParams.AlreadyExistsbgp network already existsThe BGP network already exists.
400InvalidStatus.CannotOperateinvalid status cannot operateYou cannot perform the operation when the specified resource is in the current state.
400InvalidParams.PeerIpAddressMustPointOutvbr has 0 or more than 1 subif ,point out peerIpAddress.You must set the PeerIpAddress parameter.
400InvalidParams.PeerIpAddressInUsepeer ip address in use ,cannot create bgp peer.The peer IP address is being used. Therefore, you cannot use it to create a BGP peer.
400QuotaExceeded.Bgpbgp group count per vbr quota exceed.The number of BGP groups in the VBR has reached the upper limit.
400IllegalParam.PeerAsnThe param of PeerAsn is illegalThe PeerAsn parameter is set to an invalid value.
400IllegalParam.LocalAsnThe param of LocalAsn is illegalThe LocalAsn parameter is set to an invalid value.
400OperationFailed.PconnTrafficNotEnableThe operation is failed because of PconnTrafficNotEnable.Billing for outbound data transfer is disabled.
400OperationUnsupportOperation is unsupport, not in vbr support custom local asn white list.The operation is not supported.
400IllegalParam.RouteLimitThe operation is failed because of bgp group max route entry num quota exceed.The number of routes that can be received by each BGP peer in the BGP group exceeds the upper limit.
404InvalidRegionId.NotFoundThe specified RegionId is not found.The specified region ID is invalid. Check whether the service is available in the specified region.

For a list of error codes, visit the Service error codes.

Change history

Change timeSummary of changesOperation
2024-08-16The Error code has changedView Change Details
2024-06-19The Error code has changedView Change Details
2024-06-13The Error code has changedView Change Details
2024-04-19API Description Update. The Error code has changedView Change Details