Data Transmission Service:Migrate data from an Amazon Aurora MySQL cluster to a PolarDB for MySQL cluster

Limits

• DTS uses read and write resources of the source and destination databases during full data migration. This may increase the loads of the database servers. If the database performance is unfavorable, the specification is low, or the data volume is large, database services may become unavailable. For example, DTS occupies a large amount of read and write resources in the following cases: a large number of slow SQL queries are performed on the source database, the tables have no primary keys, or a deadlock occurs in the destination database. Before you migrate data, evaluate the impact of data migration on the performance of the source and destination databases. We recommend that you migrate data during off-peak hours. For example, you can migrate data when the CPU utilization of the source and destination databases is less than 30%.

• The source database must have PRIMARY KEY or UNIQUE constraints and all fields must be unique. Otherwise, the destination database may contain duplicate data records.

• DTS uses the ROUND(COLUMN,PRECISION) function to retrieve values from columns of the FLOAT or DOUBLE data type. If you do not specify a precision, DTS sets the precision for the FLOAT data type to 38 digits and the precision for the DOUBLE data type to 308 digits. You must check whether the precision settings meet your business requirements.

• If the name of the source database is invalid, you must create a database in the PolarDB for MySQL cluster before you configure a data migration task.

  Note

  For more information about how to create a database and the database naming conventions, see Database management operations.

• If a data migration task fails, DTS automatically resumes the task. Before you switch your workloads to the destination database, stop or release the data migration task. Otherwise, the data in the source database overwrites the data in the destination database after the task is resumed.

Billing rules

Migration types

• Schema migration

  DTS migrates the schemas of objects to the PolarDB for MySQL cluster. DTS supports schema migration for the following types of objects: table, view, trigger, stored procedure, and function. DTS does not support schema migration for events.

  Note

  • During schema migration, DTS changes the value of the SECURITY attribute from DEFINER to INVOKER for views, stored procedures, and stored functions.

  • DTS does not migrate user information. To call a view, stored procedure, or stored function of the destination database, you must grant the read and write permissions to INVOKER.

• Full data migration

  DTS migrates historical data of the required objects from the Amazon Aurora MySQL cluster to the PolarDB for MySQL cluster.

  Note

  During full data migration, concurrent INSERT operations cause fragmentation in the tables of the destination database. After full data migration is complete, the size of used tablespace of the destination database is larger than that of the source database.

• Incremental data migration

  After full data migration is complete, DTS retrieves binary log files from the Amazon Aurora MySQL cluster. Then, DTS synchronizes incremental data from the Amazon Aurora MySQL cluster to the PolarDB for MySQL cluster. Incremental data migration allows you to ensure service continuity when you migrate data between MySQL databases.

Permissions required for database accounts

For more information about how to create a database account and grant permissions to the database account, see the following topics:

• Amazon Aurora MySQL cluster: Create an account for a self-managed MySQL database and configure binary logging

• PolarDB for MySQL cluster: Create and manage a database account.

Preparations

1. Log on to the Amazon Aurora console.

2. In the left-side navigation pane, click Databases.

3. Click the DB identifier of the node whose Role is Writer instance.

4. On the Connectivity & security tab, click the name of the VPC security group that corresponds to the node.

5. On the Security Groups page, click the ID of the security group that you want to configure.

6. On the Inbound rules tab, click Edit inbound rules.

7. On the Edit inbound rules page, click Add rule, add the CIDR blocks of DTS servers that reside in the corresponding region to the inbound rule, and then click Save rules. For more information, see Add the CIDR blocks of DTS servers.

   Note

   • You need to add only the CIDR blocks of DTS servers that reside in the same region as the destination database. For example, the source database resides in the Singapore region and the destination database resides in the China (Hangzhou) region. You need to add only the CIDR blocks of DTS servers that reside in the China (Hangzhou) region.

   • You can add all of the required CIDR blocks to the inbound rule at a time.

   • If you have other questions, see the official documentation of Amazon or contact technical support.

8. Log on to the source Amazon Aurora MySQL cluster and specify the retention period of binary log files. Skip this step if you do not need to perform incremental data migration.

   call mysql.rds_set_configuration('binlog retention hours', 24);

   Note

   • The preceding statement sets the retention period of binary log files to 24 hours. The maximum retention period is 168 hours, which equals seven days.

   • The binary logging feature of the Amazon Aurora MySQL cluster must be enabled and the value of the binlog_format parameter must be set to row. If the MySQL version is 5.6 or later, the value of the binlog_row_image parameter must be set to full. For more information, see the official documentation of Amazon or contact technical support.

Procedure (in the new DTS console)

1. Use one of the following methods to go to the Data Migration page and select the region in which the data migration instance resides.

   DTS console

   1. Log on to the DTS console.

   2. In the left-side navigation pane, click Data Migration.

   3. In the upper-left corner of the page, select the region in which the data migration instance resides.

   DMS console

   Note

   The actual operation may vary based on the mode and layout of the DMS console. For more information, see Simple mode and Customize the layout and style of the DMS console.

   1. Log on to the DMS console.

   2. In the top navigation bar, move the pointer over Data + AI > DTS (DTS) > Data Migration .

   3. From the drop-down list to the right of Data Migration Tasks, select the region in which the data synchronization instance resides.

2. Click Create Task to go to the task configuration page.

3. Configure the source and destination databases. The following table describes the parameters.

   Warning

   After you configure the source and destination databases, we recommend that you read the Limits that are displayed in the upper part of the page. Otherwise, the task may fail or data inconsistency may occur.

   Section	Parameter	Description
   N/A	Task Name	The name of the DTS task. DTS automatically generates a task name. We recommend that you specify an informative name that makes it easy to identify the task. You do not need to specify a unique task name.
   Source Database	Select a DMS database instance	The database that you want to use. You can choose whether to use an existing database based on your business requirements. If you select an existing database, DTS automatically populates the parameters for the database. If you do not select an existing database, you must configure the following database information. Note Click Add DMS Database Instance to register a database instance in the DMS console. For more information, see Register an Alibaba Cloud database instance and Register a database hosted on a third-party cloud service or a self-managed database. In the DTS console, register a database with DTS on the Databasr Connection page or the new configuration page. For more information, see Manage database connections.
   	Database Type	The type of the source database. Select MySQL.
   	Access Method	The access method of the source database. Select Public IP Address.
   	Instance Region	The region in which the Amazon Aurora MySQL cluster resides. Note If the region in which the Amazon Aurora MySQL cluster resides is not displayed in the drop-down list, select a region that is geographically closest to the Amazon Aurora MySQL cluster.
   	Domain Name or IP	The endpoint that is used to access the Amazon Aurora MySQL cluster. Note You can obtain the endpoint on the basic information page of the Amazon Aurora MySQL cluster.
   	Port Number	The service port number of the Amazon Aurora MySQL cluster. Default value: 3306.
   	Database Account	The database account of the Amazon Aurora MySQL cluster. For information about the permissions that are required for the account, see the Permissions required for database accounts section of this topic.
   	Database Password	The password that is used to access the database instance.
   	Encryption	Specifies whether to encrypt the connection to the source database. Select Non-encrypted or SSL-encrypted based on your business requirements. If SSL encryption is not enabled for an Amazon Aurora MySQL cluster, select Non-encrypted. If SSL encryption is enabled for an Amazon Aurora MySQL cluster, select SSL-encrypted. You also need to upload CA Certificate and specify CA Key.
   Destination Database	Select a DMS database instance	The database that you want to use. You can choose whether to use an existing database based on your business requirements. If you select an existing database, DTS automatically populates the parameters for the database. If you do not select an existing database, you must configure the following database information. Note Click Add DMS Database Instance to register a database instance in the DMS console. For more information, see Register an Alibaba Cloud database instance and Register a database hosted on a third-party cloud service or a self-managed database. In the DTS console, register a database with DTS on the Databasr Connection page or the new configuration page. For more information, see Manage database connections.
   	Database Type	The type of the destination database. Select PolarDB for MySQL.
   	Access Method	The access method of the destination database. Select Alibaba Cloud Instance.
   	Instance Region	The region in which the destination PolarDB for MySQL cluster resides.
   	PolarDB Cluster ID	The ID of the destination PolarDB for MySQL cluster.
   	Database Account	The database account of the destination PolarDB for MySQL cluster. For information about the permissions that are required for the account, see the Permissions required for database accounts section of this topic.
   	Database Password	The password that is used to access the database instance.
   	Encryption	Specifies whether to encrypt the connection to the source database. You can configure this parameter based on your business requirements. For more information about the SSL encryption feature, see Configure SSL encryption.

4. In the lower part of the page, click Test Connectivity and Proceed, and then click Test Connectivity in the CIDR Blocks of DTS Servers dialog box that appears.

   Note

   Make sure that the CIDR blocks of DTS servers can be automatically or manually added to the security settings of the source and destination databases to allow access from DTS servers. For more information, see Add the CIDR blocks of DTS servers.

5. Configure the objects to be migrated.

   1. On the Configure Objects page, configure the objects that you want to migrate.

      Parameter	Description
      Migration Types	To perform only full data migration, select Schema Migration and Full Data Migration. To ensure service continuity during data migration, select Schema Migration, Full Data Migration, and Incremental Data Migration. Note If you do not select Schema Migration, make sure a database and a table are created in the destination database to receive data and the object name mapping feature is enabled in Selected Objects. If you do not select Incremental Data Migration, we recommend that you do not write data to the source database during data migration. This ensures data consistency between the source and destination databases.
      Method to Migrate Triggers in Source Database	The method that is used to migrate triggers from the source database. You can select a migration method based on your business requirements. If no triggers are to be migrated, you do not need to configure this parameter. For more information, see Synchronize or migrate triggers from the source database. Note You can configure this parameter only if you select Schema Migration for Migration Types.
      Processing Mode of Conflicting Tables	Precheck and Report Errors: checks whether the destination database contains tables that use the same names as tables in the source database. If the source and destination databases do not contain tables that have identical table names, the precheck is passed. Otherwise, an error is returned during the precheck and the data migration task cannot be started. Note If the source and destination databases contain tables with identical names and the tables in the destination database cannot be deleted or renamed, you can use the object name mapping feature to rename the tables that are migrated to the destination database. For more information, see Map object names. Ignore Errors and Proceed: skips the precheck for identical table names in the source and destination databases. Warning If you select Ignore Errors and Proceed, data inconsistency may occur and your business may be exposed to the following potential risks: If the source and destination databases have the same schema, and a data record has the same primary key as an existing data record in the destination database, the following scenarios may occur: During full data migration, DTS does not migrate the data record to the destination database. The existing data record in the destination database is retained. During incremental data migration, DTS migrates the data record to the destination database. The existing data record in the destination database is overwritten. If the source and destination databases have different schemas, only specific columns are migrated or the data migration task fails. Proceed with caution.
      Capitalization of Object Names in Destination Instance	The capitalization of database names, table names, and column names in the destination instance. By default, DTS default policy is selected. You can select other options to make sure that the capitalization of object names is consistent with that of the source or destination database. For more information, see Specify the capitalization of object names in the destination instance.
      Source Objects	Select one or more objects from the Source Objects section. Click the icon and add the objects to the Selected Objects section. Note You can select columns, tables, or schemas as the objects to be migrated. If you select tables or columns as the objects to be migrated, DTS does not migrate other objects, such as views, triggers, or stored procedures, to the destination database.
      Selected Objects	To rename an object that you want to migrate to the destination instance, right-click the object in the Selected Objects section. For more information, see Map the name of a single object. To rename multiple objects at a time, click Batch Edit in the upper-right corner of the Selected Objects section. For more information, see Map multiple object names at a time. Note If you use the object name mapping feature to rename an object, other objects that depend on the object may fail to be migrated. To specify WHERE conditions to filter data, right-click a table in the Selected Objects section. In the dialog box that appears, specify the conditions. For more information, see Specify filter conditions. To migrate the SQL operations performed on a specific database or table, right-click the object in the Selected Objects section. In the dialog box that appears, select the SQL operations that you want to migrate.

   2. Click Next: Advanced Settings to configure advanced settings.

      Parameter	Description
      Dedicated Cluster for Task Scheduling	By default, DTS schedules the data migration task to the shared cluster if you do not specify a dedicated cluster. If you want to improve the stability of data migration tasks, purchase a dedicated cluster. For more information, see What is a DTS dedicated cluster.
      Select the engine type of the destination database	Select the engine type of the destination database InnoDB: the default storage engine. X-Engine: the database storage engine for online transaction processing (OLTP).
      Copy the temporary table of the Online DDL tool that is generated in the source table to the destination database.	If you use DMS or the gh-ost tool to perform online DDL operations on the source database, you can specify whether to migrate the data of temporary tables generated by online DDL operations. Valid values: Important You cannot use tools such as pt-online-schema-change to perform online DDL operations on the source database. Otherwise, the DTS task fails. Yes: DTS migrates the data of temporary tables generated by online DDL operations. Note If online DDL operations generate a large amount of data, latency may occur for the data migration task. No, Adapt to DMS Online DDL: DTS does not migrate the data of temporary tables generated by online DDL operations. Only the original DDL operations that are performed by using DMS are migrated. Note If you select this option, the tables in the destination database may be locked. No, Adapt to gh-ost: DTS does not migrate the data of temporary tables generated by online DDL operations. Only the original DDL operations that are performed by using the gh-ost tool are migrated. You can use the default or custom regular expressions to filter out the shadow tables of the gh-ost tool and tables that are not required. Note If you select this option, the tables in the destination database may be locked.
      Retry Time for Failed Connections	The retry time range for failed connections. If the source or destination database fails to be connected after the data migration task is started, DTS immediately retries a connection within the retry time range. Valid values: 10 to 1,440. Unit: minutes. Default value: 720. We recommend that you set the parameter to a value greater than 30. If DTS is reconnected to the source and destination databases within the specified retry time range, DTS resumes the data migration task. Otherwise, the data migration task fails. Note If you specify different retry time ranges for multiple data migration tasks that share the same source or destination database, the value that is specified later takes precedence. When DTS retries a connection, you are charged for the DTS instance. We recommend that you specify the retry time range based on your business requirements. You can also release the DTS instance at the earliest opportunity after the source database and destination instance are released.
      Retry Time for Other Issues	The retry time range for other issues. For example, if DDL or DML operations fail to be performed after the data migration task is started, DTS immediately retries the operations within the retry time range. Valid values: 1 to 1440. Unit: minutes. Default value: 10. We recommend that you set the parameter to a value greater than 10. If the failed operations are successfully performed within the specified retry time range, DTS resumes the data migration task. Otherwise, the data migration task fails. Important The value of the Retry Time for Other Issues parameter must be smaller than the value of the Retry Time for Failed Connections parameter.
      Enable Throttling for Full Data Migration	Specifies whether to enable throttling for full data migration. During full data migration, DTS uses the read and write resources of the source and destination databases. This may increase the loads of the database servers. You can enable throttling for full data migration based on your business requirements. To configure throttling, you must configure the Queries per second (QPS) to the source database, RPS of Full Data Migration, and Data migration speed for full migration (MB/s) parameters. This reduces the loads of the destination database server. Note You can configure this parameter only if you select Full Data Migration for the Migration Types parameter.
      Enable Throttling for Incremental Data Migration	Specifies whether to enable throttling for incremental data migration. To configure throttling, you must configure the RPS of Incremental Data Migration and Data migration speed for incremental migration (MB/s) parameters. This reduces the loads of the destination database server. Note You can configure this parameter only if you select Incremental Data Migration for the Migration Types parameter.
      Environment Tag	The environment tag that is used to identify the instance. You can select an environment tag based on your business requirements. In this example, you do not need to configure this parameter.
      Whether to delete SQL operations on heartbeat tables of forward and reverse tasks	Specifies whether to write SQL operations on heartbeat tables to the source database while the DTS instance is running. Valid values: Yes: does not write SQL operations on heartbeat tables. In this case, a latency of the DTS instance may be displayed. No: writes SQL operations on heartbeat tables. In this case, features such as physical backup and cloning of the source database may be affected.
      Configure ETL	Specifies whether to enable the extract, transform, and load (ETL) feature. For more information, see What is ETL? Valid values: Yes: configures the ETL feature. You can enter data processing statements in the code editor. For more information, see Configure ETL in a data migration or data synchronization task. No: does not configure the ETL feature.
      Monitoring and Alerting	Specifies whether to configure alerting for the data migration task. If the task fails or the migration latency exceeds the specified threshold, the alert contacts receive notifications. Valid values: No: does not configure alerting. Yes: configures alerting. In this case, you must also configure the alert threshold and alert notification settings. For more information, see the Configure monitoring and alerting when you create a DTS task section of the Configure monitoring and alerting topic.

   3. Click Next Step: Data Verification to configure the data verification task.

      For more information about how to use the data verification feature, see Configure a data verification task.

6. Save the task settings and run a precheck.

   • To view the parameters to be specified when you call the relevant API operation to configure the DTS task, move the pointer over Next: Save Task Settings and Precheck and click Preview OpenAPI parameters.

   • If you do not need to view or have viewed the parameters, click Next: Save Task Settings and Precheck in the lower part of the page.

   Note

   • Before you can start the data migration task, DTS performs a precheck. You can start the data migration task only after the task passes the precheck.

   • If the task fails to pass the precheck, click View Details next to each failed item. After you analyze the causes based on the check results, troubleshoot the issues. Then, run a precheck again.

   • If an alert is triggered for an item during the precheck:

     • If an alert item cannot be ignored, click View Details next to the failed item and troubleshoot the issues. Then, run a precheck again.

     • If the alert item can be ignored, click Confirm Alert Details. In the View Details dialog box, click Ignore. In the message that appears, click OK. Then, click Precheck Again to run a precheck again. If you ignore the alert item, data inconsistency may occur, and your business may be exposed to potential risks.

7. Purchase an instance.

   1. Wait until Success Rate becomes 100%. Then, click Next: Purchase Instance.

   2. On the Purchase Instance page, configure the Instance Class parameter for the data migration instance. The following table describes the parameters.

      Section	Parameter	Description
      New Instance Class	Resource Group	The resource group to which the data migration instance belongs. Default value: default resource group. For more information, see What is Resource Management?
      	Instance Class	DTS provides instance classes that vary in the migration speed. You can select an instance class based on your business scenario. For more information, see Instance classes of data migration instances.

   3. Read and agree to Data Transmission Service (Pay-as-you-go) Service Terms by selecting the check box.

   4. Click Buy and Start. In the message that appears, click OK.

      You can view the progress of the task on the Data Migration page.

Procedure (in the old DTS console)

1. Log on to the DTS console.

   Note

   If you are redirected to the Data Management (DMS) console, you can click the icon in the to go to the previous version of the DTS console.

2. In the left-side navigation pane, click Data Migration.

3. At the top of the Migration Tasks page, select the region where the destination cluster resides.

4. In the upper-right corner of the page, click Create Migration Task.

5. Configure the source and destination databases.

   

   Section	Parameter	Description
   N/A	Task Name	The task name that DTS automatically generates. We recommend that you specify a descriptive name that makes it easy to identify the task. You do not need to specify a unique task name.
   Source Database	Instance Type	The type of the source database. Select User-Created Database with Public IP Address.
   	Instance Region	The region in which the source database resides. If you select User-Created Database with Public IP Address as the instance type of the source database, you do not need to specify the Instance Region parameter.
   	Database Type	The type of the source database. Select MySQL.
   	Hostname or IP Address	The endpoint that is used to access the Amazon Aurora MySQL cluster. Note You can obtain the endpoint on the basic information page of the Amazon Aurora MySQL cluster.
   	Port Number	The service port number of the Amazon Aurora MySQL cluster. Default value: 3306.
   	Database Account	The database account of the Amazon Aurora MySQL cluster. For information about the permissions that are required for the account, see the Permissions required for database accounts section of this topic.
   	Database Password	The password of the database account. Note After you configure the source database parameters, click Test Connectivity next to Database Password to verify whether the configured parameters are valid. If the configured parameters are valid, the Passed message is displayed. If the Failed message is displayed, click Check next to Failed to modify the source database parameters based on the check results.
   Destination Database	Instance Type	The type of the destination database. Select PolarDB.
   	Instance Region	The region in which the PolarDB for MySQL cluster resides.
   	PolarDB Instance ID	The ID of the destination PolarDB for MySQL cluster.
   	Database Account	The database account of the destination PolarDB for MySQL cluster. For information about the permissions that are required for the account, see the Permissions required for database accounts section of this topic.
   	Database Password	The password of the database account. Note After you configure the destination database parameters, click Test Connectivity next to Database Password to verify whether the configured parameters are valid. If the configured parameters are valid, the Passed message is displayed. If the Failed message is displayed, click Check next to Failed to modify the destination database parameters based on the check results.

6. In the lower-right corner of the page, click Set Whitelist and Next.

   If the source or destination database instance is an Alibaba Cloud database instance, such as an ApsaraDB RDS for MySQL or ApsaraDB for MongoDB instance, or is a self-managed database hosted on ECS, DTS automatically adds the CIDR blocks of DTS servers to a whitelist of the database instance or ECS security group rules. If the source or destination database is a self-managed database on data centers or is from other cloud service providers, you must manually add the CIDR blocks of DTS servers to allow DTS to access the database. For more information, see the "CIDR blocks of DTS servers" section of the Add the CIDR blocks of DTS servers topic.

   Warning

   If the CIDR blocks of DTS servers are automatically or manually added to the whitelist of the database or instance, or to the ECS security group rules, security risks may arise. Therefore, before you use DTS to migrate data, you must understand and acknowledge the potential risks and take preventive measures, including but not limited to the following measures: enhance the security of your username and password, limit the ports that are exposed, authenticate API calls, regularly check the whitelist or ECS security group rules and forbid unauthorized CIDR blocks, or connect the database to DTS by using Express Connect, VPN Gateway, or Smart Access Gateway.

7. Select the objects to be migrated and the migration types.

   

   Setting	Description
   Select the migration types	To perform only full data migration, select Schema Migration and Full Data Migration. To ensure service continuity during data migration, select Schema Migration, Full Data Migration, and Incremental Data Migration. Note If Incremental Data Migration is not selected, we recommend that you do not write data to the Amazon Aurora MySQL cluster during full data migration. This ensures data consistency between the source and destination databases.
   Select the objects to be migrated	Select one or more objects from the Available section and click the icon to move the objects to the Selected section. Note You can select columns, tables, or databases as the objects to be migrated. By default, after an object is migrated to the destination database, the name of the object remains unchanged in the destination database. You can use the object name mapping feature to rename the objects that are migrated to the destination database. For more information, see Object name mapping. If you use the object name mapping feature to rename an object, other objects that depend on the object may fail to be migrated.
   Specify whether to rename objects	You can use the object name mapping feature to rename the objects that are migrated to the destination database. For more information, see Object name mapping.
   Specify the retry time range for a failed connection to the source or destination database	By default, if DTS fails to connect to the source or destination database, DTS retries within the next 12 hours. You can specify the retry time range based on your business requirements. If DTS reconnects to the source and destination databases within the specified retry time range, DTS resumes the data migration task. Otherwise, the data migration task fails. Note When DTS retries a connection, you are charged for the DTS instance. We recommend that you specify the retry time range based on your business requirements. You can also release the DTS instance at the earliest opportunity after the source and destination instances are released.
   Specify whether to copy temporary tables to the destination database when DMS performs online DDL operations on the source table	If you use Data Management (DMS) to perform online DDL operations on the source database, you can specify whether to migrate temporary tables generated by online DDL operations. Valid values: Yes: DTS migrates the data of temporary tables generated by online DDL operations. Note If online DDL operations generate a large amount of data, latency may occur for the data migration task. No: DTS does not migrate the data of temporary tables generated by online DDL operations. Only the original DDL data of the source database is migrated. Note If you select No, the tables in the PolarDB for MySQL cluster may be locked.

8. In the lower-right corner of the page, click Precheck.

   Note

   • Before you can start the data migration task, DTS performs a precheck. You can start the data migration task only after the task passes the precheck.

   • If the task fails to pass the precheck, you can click the icon next to each failed item to view details.

     • You can troubleshoot the issues based on the causes and run a precheck again.

     • If you do not need to troubleshoot the issues, you can ignore failed items and run a precheck again.

9. After the task passes the precheck, click Next.

10. In the Confirm Settings dialog box, specify the Channel Specification parameter and select Data Transmission Service (Pay-As-You-Go) Service Terms.

11. Click Buy and Start to start the data migration task.

    • Schema migration and full data migration

      We recommend that you do not manually stop the task during full data migration. Otherwise, the data migrated to the destination database may be incomplete. You can wait until the data migration task automatically stops.

    • Schema migration, full data migration, and incremental data migration

      An incremental data migration task does not automatically stop. You must manually stop the task.

      Important

      We recommend that you select an appropriate time to manually stop the data migration task. For example, you can stop the task during off-peak hours or before you switch your workloads to the destination cluster.

      1. Wait until Incremental Data Migration and The migration task is not delayed appear in the progress bar of the migration task. Then, stop writing data to the source database for a few minutes. The latency of incremental data migration may be displayed in the progress bar.

      2. Wait until the status of incremental data migration changes to The migration task is not delayed again. Then, manually stop the migration task.

12. Switch your workloads to the PolarDB for MySQL cluster.