Data Transmission Service:Migrate data from a self-managed HBase database to an AnalyticDB for MySQL V3.0 cluster

Prerequisites

• The database versions of the self-managed HBase database and the AnalyticDB for MySQL V3.0 cluster are supported by DTS. For more information , see Overview of data migration scenarios.
• The destination AnalyticDB for MySQL V3.0 cluster is created. For more information, see Create a cluster.
• The available storage space of the destination AnalyticDB for MySQL V3.0 cluster is larger than the total size of the data in the self-managed HBase database.

Limits

Billing

Migration types

• Schema migration

  Data Transmission Service (DTS) migrates the schemas of objects from the source database to the destination database.

  DTS supports schema migration for tables.
  Note DTS can migrate the tables of an entire database or a single table.
• Full data migration

  DTS migrates the existing data of objects from the source database to the destination database.

Permissions required for database accounts

Procedure

1. Go to the Data Migration Tasks page.
   1. Log on to the Data Management (DMS) console.
   2. In the top navigation bar, click DTS.
   3. In the left-side navigation pane, choose DTS (DTS) > Data Migration.
   Note

   • Operations may vary based on the mode and layout of the DMS console. For more information, see Simple mode and Configure the DMS console based on your business requirements.
   • You can also go to the Data Migration Tasks page of the new DTS console.
2. From the drop-down list next to Data Migration Tasks, select the region in which the data migration instance resides.
   Note If you use the new DTS console, you must select the region in which the data migration instance resides in the upper-left corner.
3. Click Create Task. On the page that appears, configure the source and destination databases.
   Warning After you select the source and destination instances, we recommend that you read the limits displayed at the top of the page. This helps ensure that the task properly runs or prevent data inconsistency.

   Section	Parameter	Description
   N/A	Task Name	The name of the task. DTS automatically generates a task name. We recommend that you specify an informative name to identify the task. You do not need to specify a unique task name.
   Source Database	Select an existing DMS database instance	The database instance that you want to use. You can choose whether to use an existing instance based on your business requirements. If you use an existing instance, DTS automatically applies the parameter settings of the source database. If you do not use an existing instance, you must configure the parameters for the database.
   	Database Type	The type of the source database. Select HBase.
   	Access Method	The access method of the source database. Select Public IP Address. Note If your source database is a self-managed database, you must deploy the network environment for the database. For more information, see Preparation overview.
   	Instance Region	The region in which the self-managed HBase database resides.
   	ZooKeeper URL	The endpoints of the ZooKeeper servers that are configured for the self-managed HBase database. Enter each endpoint in the <IP address> or <Domain name:Port number> format. Separate multiple endpoints with commas (,).
   Destination Database	Select an existing DMS database instance	The database instance that you want to use. You can choose whether to use an existing instance based on your business requirements. If you use an existing instance, DTS automatically applies the parameter settings of the instance. If you do not use an existing instance, you must configure the parameters for the database.
   	Database Type	The type of the destination database. Select AnalyticDB for MySQL 3.0.
   	Access Method	The access method of the destination database. Select Alibaba Cloud Instance.
   	Instance Region	The region in which the destination AnalyticDB for MySQL V3.0 cluster resides.
   	Instance ID	The ID of the destination AnalyticDB for MySQL V3.0 cluster.
   	Database Account	The database account of the destination AnalyticDB for MySQL V3.0 cluster. For more information about the permissions that are required for the account, see the Permissions required for database accounts section of this topic.
   	Database Password	The password of the database account.

4. If a whitelist is configured for your self-managed database, you must add the CIDR blocks of DTS servers to the whitelist. Then, click Test Connectivity and Proceed.
   Warning If the CIDR blocks of DTS servers are automatically or manually added to the whitelist of a database or an instance, or to the security group rules of an ECS instance, security risks may arise. Therefore, before you use DTS to migrate data, you must understand and acknowledge the potential risks and take preventive measures, including but not limited to the following measures: enhance the security of your username and password, limit the ports that are exposed, authenticate API calls, regularly check the whitelist or ECS security group rules and forbid unauthorized CIDR blocks, or connect the database to DTS by using Express Connect, VPN Gateway, or Smart Access Gateway.
5. Configure objects to migrate and advanced settings.
   • Basic Settings

     Parameter or setting	Description
     Migration Type	By default, Schema Migration and Full Data Migration are selected. Note In this scenario, DTS does not support incremental data migration. To ensure data consistency, we recommend that you do not write data to the source database during data migration. The schema of and data in the table that is created by executing the CREATE TABLE statement can be migrated to the destination database.
     Processing Mode of Conflicting Tables	Precheck and Report Errors: checks whether the destination database contains tables that have the same names as tables in the source database. If the source and destination databases do not contain identical table names, the precheck is passed. Otherwise, an error is returned during the precheck and the data migration task cannot be started. Note You can use the object name mapping feature to rename the tables that are migrated to the destination database. You can use this feature if the source and destination databases contain tables that have identical names and the tables in the destination database cannot be deleted or renamed. For more information, see Map object names. Ignore Errors and Proceed: skips the precheck for identical table names in the source and destination databases. Warning If you select Ignore Errors and Proceed, data inconsistency may occur, and your business may be exposed to potential risks. If the source and destination databases have the same schema, DTS does not migrate data records that have the same primary keys as data records in the destination database. If the source and destination databases have different schemas, only some columns are migrated or the data migration task fails. Proceed with caution.
     Merge Tables	Yes: If you select this option, DTS adds the __dts_data_source column to each table to record data sources. For more information, see Enable the multi-table merging feature. No: This option is selected by default. Note If you set this parameter to Yes, all of the selected source tables in the task are merged into the destination table. If you do not need to merge specific source tables, you can create a separate data migration task for these tables. Warning We recommend that you do not perform DDL operations to change the schemas of source databases or tables. Otherwise, data inconsistency may occur or the data migration task fails.
     Source Objects	Select one or more objects from the Source Objects section and click the icon to add the objects to the Selected Objects section. Note You can select tables or databases as the objects to be migrated. If you select tables as the objects to be migrated, DTS does not migrate other objects such as views, triggers, and stored procedures to the destination database. If you select a database as the object to be migrated, DTS migrates data based on the following default rules: If the table to be migrated in the source database has a primary key, such as a single-column primary key or a composite primary key, the primary key columns are specified as the distribution keys. If the table to be migrated in the source database does not have a primary key, an auto-increment primary key column is automatically generated in the destination table. This may cause data inconsistency between the source and destination databases.
     Selected Objects	To rename an object that you want to migrate to the destination instance, right-click the object in the Selected Objects section. For more information, see Map the name of a single object. To rename multiple objects at a time, click Batch Edit in the upper-right corner of the Selected Objects section. For more information, see Map multiple object names at a time. Note If you use the object name mapping feature to rename an object, other objects that are dependent on the object may fail to be migrated. To specify WHERE conditions to filter data, right-click an object in the Selected Objects section. In the dialog box that appears, specify the conditions. For more information, see Use SQL conditions to filter data.

   • Advanced Settings

     Parameter	Description
     Set Alerts	Specifies whether to set alerts for the data migration task. If the task fails or the migration latency exceeds the threshold, the alert contacts will receive notifications. Valid values: No: does not set alerts. Yes: sets alerts. If you select Yes, you must also set the alert threshold and alert contacts. For more information, see Configure monitoring and alerting when you create a DTS task.
     Retry Time for Failed Connections	The retry time range for failed connections. If the source or destination database fails to be connected after the data migration task is started, DTS immediately retries a connection within the time range. Valid values: 10 to 1440. Unit: minutes. Default value: 720. We recommend that you set the parameter to a value greater than 30. If DTS reconnects to the source and destination databases within the specified time range, DTS resumes the data migration task. Otherwise, the data migration task fails. Note If you set different retry time ranges for multiple data migration tasks that share the same source or destination database, the value that is set later takes precedence. If DTS retries a connection, you are charged for the operation of the DTS instance. We recommend that you specify the retry time based on your business needs and release the DTS instance at your earliest opportunity after the source and destination instances are released.
     Capitalization of Object Names in Destination Instance	The capitalization of database names, table names, and column names in the destination instance. By default, DTS default policy is selected. You can select other options to ensure that the capitalization of object names is consistent with the default capitalization of object names in the source or destination database. For more information, see Specify the capitalization of object names in the destination instance.
     Configure ETL	Specifies whether to configure the extract, transform, and load (ETL) feature. For more information, see What is ETL?. Valid values: Yes: configures the ETL feature. You can enter data processing statements in the code editor. For more information, see Configure ETL in a data migration or data synchronization task. No: does not configure the ETL feature.

6. Specify the primary key columns and distribution keys of the tables that you want to migrate to the AnalyticDB for MySQL V3.0 cluster.
   Note

   • If you select Schema Migration as the migration type, you must specify the type, primary key column, and distribution key for the tables that you want to migrate to the AnalyticDB for MySQL V3.0 cluster. For more information, see CREATE TABLE.
   • In the Primary Key Column field, you can specify multiple columns to form a composite primary key. In this case, you must specify one or more primary key columns as the distribution keys.
7. In the lower part of the page, click Next: Save Task Settings and Precheck.
   Note

   • Before you can start the data migration task, DTS performs a precheck. You can start the data migration task only after the task passes the precheck.
   • If the task fails to pass the precheck, click View Details next to each failed item. After you troubleshoot the issues based on the causes, run a precheck again.
   • If an alert is triggered for an item during the precheck:
     • If an alert item cannot be ignored, click View Details next to the failed item and troubleshoot the issues. Then, run a precheck again.
     • If an alert item can be ignored, click Confirm Alert Details. In the View Details dialog box, click Ignore. In the message that appears, click OK. Then, click Precheck Again to run a precheck again. If you ignore the alert item, data inconsistency may occur, and your business may be exposed to potential risks.
8. Wait until the Success Rate value becomes 100%. Then, click Next: Purchase Instance.
9. On the Purchase Instance page, specify the Instance Class parameter for the data migration instance. The following table describes the parameter.

   Section	Parameter	Description
   Parameters	Instance Class	DTS provides several instance classes that vary in the migration speed. You can select an instance class based on your business scenario. For more information, see Specifications of data migration instances.

10. Read and select the check box to agree to Data Transmission Service (Pay-as-you-go) Service Terms.
11. Click Buy and Start to start the data migration task. You can view the progress of the task in the task list.